Air generators - Import export

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.

ELECTRIC HEATER FAN TDS 120The thermal power plant among the TDS electric heater fans With a hefty 30 kW of heating power the TDS 120 is the undisputed No. 1 among the popular TDS electric heater fans from Trotec and offers you convenient spare capacity for the permanent heating of larger rooms or for temperature control in large-volume building sections. Owing to the integrated thermostat control, the generated warm air current can be infinitely adjusted to the desired temperature and regulated in line with demand via a two-stage power control for space-filling temperature control. And since our distinctive logo has been printed on the outside, we have also incorporated distinct extras inside, which make all the difference to conventional standard electric heater fans.

The generation of compressed air is always connected with the formation of condensate. In most cases, this condensate contains oil, is contaminated with dirt particles and spreads out in the entire compressed-air system. A system problem which can result in damage and additional costs. The BEKOMAT drains condensate in the compressed-air system in an electronically level-controlled manner. More than 3,000,000 installations worldwide make it the industrial standard for reliable and cost-effective condensate drainage.

With cooling technology of the latest generation as well as a comprehensive functional range the multifunctional air conditioner PAC 3900 X lives up to its reputation as genuine all-rounder. For cooling, ventilation or dehumidification: The ultra-compact air conditioner meets all requirements of an ideal room climate with flying colours. With a cooling capacity of 3.9 kW the air conditioner of the PAC series is especially well suited for large rooms of up to 130 m³. Apart from the reliable cooling on hot days the PAC 3900 X filters and dehumidifies the room air and generates a fresh breeze to top it all off. As desired in three fan stages and with swing function for an optimal distribution of the air in the room. Functions of the PAC 3900 X The PAC 3900 X comes equipped with a modern microprocessor control and a variety of individually programmable functions. Optionally, the device regulates the room climate autonomously.

Feeding of filtered-out materials to silo systems over long distances (up to 700 m). Pneumatic medium-pressure conveyor systems For the conveying of filtered-out materials such as wooden splinters and wood dust or for the conveying of products in the derived timber products industry with large conveying quantities over great distances. Pneumatic medium-pressure conveyor systems are economical, reliable and enable flexible adaptations to individual conveying routes. The conveying air stream is generated by a rotary piston compressor. As opposed to fans, these have almost vertical characteristic curves; i.e. the volumetric flow rate remains almost constant as the pressure in the conveying system increases. This ensures safe material transport. Special cellular wheel sluices are necessary for channelling the conveying material into the conveying stream, such as knife gates for derived timber products. Cyclones, filters or combinations of the two are used to separate the conveying material from the conveying stream. The economical conveying lengths lie between around 150 and 750 m. The loading of the conveying stream can amount to up to 5 kg/m³ and essentially depends on the grain size, density and form of the material to be conveyed.

For the conveying of filtered-out materials to silos or containers. Pneumatic low-pressure conveyor systems For the conveying of filtered-out materials to silos or containers and for conveying distances of up to 200 m. The conveying air stream is generated by one or more fans. Product description Pneumatic low-pressure conveyor systems can be implemented as a single-pipe system or a ring system. In the case of the single-pipe system, a final separator in the form of a filter or a cyclone is always necessary. In a ring system the conveying air is driven in the ring. In this case the silo or container acts as the separator. Light dust particles that are not separated in the silo or container initially remain in the circulation. With most materials the fine dust particles tend to attach themselves to the coarser ones and are thus separated with them. Hence, a concentration of the fine dust particles in the conveying stream is avoided as far as possible. The loading of the conveying stream essentially depends on the grain size, density and form of the material to be conveyed. As a guiding value, one may assume 250 - 300 g/m³. Higher loads are possible under certain conditions. In cases where there is a high amount of material, e.g. in planing works, where the splinters are directly removed and transported away for further use, this can also be realised with a ring system and several containers. Switchover takes place automatically when the container signals that it is full. Containers are exchanged during operation.