Abs - Import export

In the thermoforming process various cladding components are produced for interior and exterior applications. Our production is distinguished by a high degree of vertical integration, allowing us a great deal of control and thus considerable flexibility.

The easy to adapt wheel arch covers afford the caravan's exterior areas optimum protection against dirt.

The entry step made from thermoformed ABS, foam-backed and machined to produce the required contours. Our high degree of vertical integration affords us great flexibility as regards the design and styling of this product.

Even slight pressure points can negatively influence the static equilibrium of a highbay warehouse. Collision protection for shelf support protects against damage resulting from frontal collision. The hollow chambers in the impactresistant profile cushion the collision energy. The solidsteel profile on the inside prevents buckling.

Strong, water-based adhesive disperion for heat transfers. ✔ Very hard once dried ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 80 - 110°C ✔ For glas, ceramics, ABS, ... Our GK-I hot melt dispersions is tailored for heat transfer printing. With a rather high activation temperatur is results is very durable bonds once applied. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto glas or ceramic products like wine or spirits bottles as well as promotional or cosmetic products made from ABS. Furthermore, it offers self-crosslinking capabilities which increase the adhesion even further. It shows great resistance against water and heat. The particles in this dispersion are fine dispersed and result in even and repeatable results.

Our ABS Therm thermal protective cover (330 mm) can be used to insulate an anchorage point or support in a lifeline system. The cover can be shortened and is available in two diameters (16 and 42 mm - inner diameter). Add an ABS Signal signal rod to easily locate your anchorage device in snow cover. 330 mm high – can be individually shortened onsite Installed on top of your roof membrane Thermal cover: Outer diameter 70 mm – designed for anchorage points and lifeline systems (Ø16 mm) Thermal cover: Outer diameter 100 mm – designed for systems using a supporting tube (Ø 42 mm)

If you are looking for an unobtrusive anchorage point to secure up to 3 individuals, simply attach this stainless steel anchor loop (Ø 5 mm) to a wooden beam. Once installed on a pitched roof, this anchorage device is virtually invisible. All you need for quick-and-easy installation are the 2 stainless steel screws provided. EN 795:2012, A + CEN/TS 16415:2017 Virtually invisible anchorage loop Designed for load-bearing wooden structures The loop is simply screwed onto a wooden rafter (also suitable for over-rafter insulation) Minimum rafter dimensions: 60 mm x 120 mm

This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set

Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Base plate allows flexible installation Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm

This cross-shaped anchor for flat roofs is weighed down using concrete slabs (50 x 50 x 5cm, not included). The design is based on a high-quality stainless steel frame (150 x 150 cm) with aluminium crossbars and a central, stainless steel anchorage point for one individual (Ø 16 mm). EN 795:2012, E For flat roof pitches ≤ 5° Weighed down using 8 concrete slabs (ca. 224 kg) Weight incl. ballast: ca. 245 kg; resulting roof load approx. 108.9 kg per m² Also designed for usage as an intermediate post in a lifeline system Incl. 5 EPDM patches to protect your roof membrane

Simply roll this mobile anchorage system for individuals over to where it is to be implemented to protect up to 2 people from falls - without any further installation effort. Our ABS SafetyBull, which is equipped with smooth-running wheels and has plenty of room for tools, is the perfect temporary fall arrest solution on a flat roof surface. EN 795:2012, B + CEN/TS 16415:2017 Flat roofs < 5° Simple to use Special wheels make it easy to move Total weight: 274 kg Optional: Toolbox Side bars (2x) Tray for materials Additional weights (11x)

This stainless steel sleeve for concrete and wood, which is permanently installed in the subsurface, has been specially designed to take up an ABS-Lock I anchor. This sleeve is available in a variety of different lengths and can be sealed up using the plastic cap provided. The system has been awarded national technical approval ("abZ") for usage by 2 individuals. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions stated in the "abZ") EN 795:2012, B + CEN/TS 16415:2017 Concrete ≥ C20/25 Wood (min. rafter dimensions: 140mm x 140mm) IMPORTANT: Axial loads may only be applied in wood installations when countered!!

This detachable stainless steel anchor is used in combination with an ABS-Lock II sleeve and can be installed on a variety of different surfaces. It is designed to secure 2 individuals simultaneously, has been awarded national technical approval by the German Institute for Construction Technology (DIBt) and is frequently used to secure the area around a window. EN 795:2012, B + CEN/TS 16415:2017 Can be simply removed at the touch of a button Locking latch prevents accidental unlocking Combine with our ABS-Lock II matching sleeve

Use this connector cable clamp to connect your lifeline system (6 or 8 mm) to a lightning conductor. This allows you to actively incorporate your anchorage device into your lightning conductor system - providing more effective protection against a lightning strike. Designed for 6 mm and 8 mm lifeline systems Connects your lifeline system to your lightning conductor

You can use this mesh sleeve to apply special adhesive when installing an anchorage device in a suspended ceiling or masonry with cavities. This metal mesh sleeve can be supplied with 3 different types of thread: M10, M16 and M22. Designed for suspended ceilings and masonry with cavities Available with 3 different types of thread: M10, M16 and M22

Use our ABS DustBrush to remove dust and other particles from your freshly-drilled bore holes. This will make the installation of your anchorage points much more reliable. Our ABS DustBrush is available in two sizes: Ø 20 mm and Ø 24 mm. Bore hold cleaning brush 2 sizes available: Ø 20 mm and Ø 24 mm

To ensure that your anchorage devices are securely installed in a concrete surface or masonry, the bore holes should be carefully cleaned prior to using special adhesive. This dust pump is designed to quickly remove any dust or residual particles that might cause problems from the bore holes. High capacity Air chamber length: 42 cm

Self-retracting lifelines that are installed under the roof - or similarly high-up - can be easily reached from ground level using this telescopic rod. This rod is available in three different lengths: 3 m, 4.5 m and 6 m. Telescopic rod - makes light work of reaching the carabiner of a self-retracting lifeline installed overhead Three models to choose from: 3 m, 4.5 m and 6 m Other lengths available upon request

This shrink tubing is specially designed for anchorage points (Ø 16 mm) and supports that have been reinforced using a supporting tube (Ø 42 mm). It is available in 3 different lengths (300, 600 and 1200 mm) and can be individually shortened. When you heat the tubing up using a hot air gun it shrinks to fit snugly around your sealant collar and anchor. Extension for ABS LockSeal sealant collars Designed for Ø 16 mm posts Available in 3 different lengths: 300, 600 and 1200 mm Simply shorten the tubing to the required length

Stainless steel “Danger of tripping” and “PPE compulsory” warning signs. Pre-drilled holes for flexible and easy installation. The angle of the signs can be manually adjusted for optimal alignment. Robust, stainless steel warning signs ”Danger of tripping” and “PPE compulsory” For long-term outdoor usage Various installation options: Concrete, wood, steel, bitumen etc.

Use one of these sealant collars to seal up an anchorage point installed on a PVC, PP or PE roof surface. This seal solution is suitable for Ø 16 and 42 mm posts. The disc is 220 mm in diameter. Shrink tubing is included in the package. Suitable for PVC, PP and PE roof surfaces Specially designed for Ø 16 mm and Ø 42 mm posts Shrink tubing included Disc diameter Ø 22 cm

This sealant collar was designed for anchorage points with a diameter of 16 or 42 mm and is cold-bonded onto the subsurface. Special notches allow it to be flexibly shorted. The disc of the collar is 420 mm in diameter. A tube clamp is included in the package. Specially designed for cold-bonding, e.g. on corrugated roofs Not suitable for EPDM sheeting Designed for Ø 16 mm and Ø 42 mm rods Tube clamp included Disc diameter Ø 42 cm

This stainless steel rod, which is manufactured completely from stainless steel (Ø 42 mm), is used to install building components and (sub)structures on a roof surface. Our ABS UniMount is a flexible solution which can be used to install solar panels and photovoltaic modules, air conditioning systems and similar components. It can can either be installed on a concrete or steel surface. Base plate (130 x 130 mm) + welded-on mounting rod (Ø 42 mm) Female thread (M 10) at the top end For steel surfaces with a depth of at least 5 mm For horizontal and vertical loads of max. 3 kN Incl. stainless steel installation set

Use this fall protection roller glider in lifeline systems and in temporary kernmantle cable lifeline solutions. Designed for kernmantle cables up to Ø 14 mm Suitable for use in a lifeline system (Ø 8 mm or Ø 6 mm) Detachable glider

This stainless steel roller glider was developed for permanent implementation in a straight lifeline system (8 mm). It is used overhead and is made of extremely robust 316 steel material. Roller glider for lifeline systems (8 mm) (only straight routes) Specially designed for overhead usage Manufactured from extremely robust stainless steel material (316) Incl. carabiner hook in accordance with EN 362 Secures 1 Person in compliance with DIN EN 795:2012

Attach this roller glider, which is made of highly-durable aluminium material, permanently to a traversable, overhead lifeline system (8 or 6 mm). Thanks to its special ball bearing-mounted stainless steel rollers, this glider runs really smoothly along the cable and can also be used to go around curves (up to 180°). General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C Ideal for overhead usage Made of highly-durable aluminium material Extremely smooth-running stainless steel rollers Specially designed for lifeline systems (8 and 6 mm)

This detachable aluminium glider - specially designed for traversable lifeline systems (8 and 6 mm) - locks automatically to protect 1 individual from falling. The large anchorage eyelet of this cable glider - which has been awarded national technical approval by the German Institute for Construction Technology (DIBt) - is suitable for both standard carabiner hooks and pipe hooks. General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C Detachable glider made of high-strength aluminium material Specially designed for lifeline systems (8 and 6 mm) Locks automatically Large anchorage eyelet - also suitable for pipe hooks Secures 1 individual in accordance with EN 795

This fully traversable curve element, which was specially designed for lifeline systems (6 and 8 mm), can be manually adjusted to fit any angle between 0° bis 180°. The element can be adjusted to lead in any desired direction - allowing you to easily bridge the roof apex, a ridge, a hollow or similar obstruction. It is manufactured from robust 316 steel material and has been awarded national technical approval. General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C &amp; CEN/TS 16415:2013 Can be flexibly adapted to fit any angle up to 180° Easily adjusted by hand Compact design Secures 4 individuals simultaneously (1 individual per glider)

This stainless steel lifeline end attachment - specially designed for our ABS-Lock SYS (8 and 6 mm) lifeline systems - can be used to compensate deviations in temperature. This tensioning element is made of 316 steel, is equipped with a spring bias and has been awarded national technical approval by the German Institute for Construction Technology (DIBt). General national technical approval (German: "abZ"): Z-14.9-786 EN 795:2012, C &amp; CEN/TS 16415:2013 Spring bias with an easily-readable gauge Inspection window allows monitoring of the cable clamping mechanism Counters slack caused by temperature changes One-piece clamping system Easily installed Manufactured completely from robust V4A stainless steel