Lifting equipment - Import export

Lödige Industries has more than 70 years’ experience in heavy goods lifting. Our Aircraft lifting equipment is known for its reliability, accuracy and durability. Reliable equipment for raising staff to the aircraft to enable your team to work on the undercarriage, access the cabin and all assembly areas. Mobile or fixed Lödige lifting platforms ease and speed up the painting of aircrafts. We have also developed lifting equipment for working on the aircraft interior.

Liftband - modular, quiet, space-saving - vertical guidance of energy, data and media. With the liftband, high vertical applications can be implemented, which have a lot of space available horizontally but only allow for low system heights. - Alternative to zig-zag solution - Lighter and with reduced installation space - Vertical applications implemented with ease - Speeds up to 1m/s - Acceleration up to 2m/s2 - Max. extension length 13m - Cable bend radius up to 250mm - Possible application areas: theatre and stage technology, indoor cranes, mobile telescopic antennas -Retracted system - safe storage in a solid steel basket -Chamfered basket: for safe operation -Strong drive plate: for easy attachment to your application -Optimised for space: telescopic steel basket for best use of space

LAWECO lift platforms are mainly used for rationally stacking and destacking wood up to a stack weight of 120 tons. Additional typical applications include overcoming height differences as well as rapid raising and lowering of individual pallets. In use with a two-floor magazine

A stationary production aid everywhere where bigger loads have to be lifted or lowered, e.g. as loading table behind compact feed lines Stroke from 800 1600 mm Electrohydraulically driven lifting and lowering, controlled via hand sensor device (Totmann) on a 3m cable.

The Gclimber eco minimizes your efforts for the time consuming ascends and descends that come with service works. The advantages are obvious, the lightweight allinone mobile drive unit is easy to transport can be installed/deinstalled in a second to the basic unit comes with included Ebox

The storage and retrieval vehicle is used for storing ULDs in racking. Equipped with a lift, the Elevating Transfer Vehicle transports ULDs vertically and horizontally at the same time. It is guided by rails which also supply the power needed. Flow plane: Horizontal and vertical Flow direction: Unidirectional Functions: Transporting, storing and retrieving ULDs Operating modes: Fully automated, semi-automated, maintenance Benefits: Three-dimensional handling Space-saving Minimal adjustments to make onsite A safe way to transport ULDs with care IATA-compliant transportation of ULDs

ight and compact transport aid for fast and flexible transport of large loads! For use on concrete and industrial floors! Non-locking steering and smooth travel guaranteed even with heavy loads. Due to the low overall height of the transport trolley, the load only needs to be lifted slightly! Danger of tipping over minimized due to low body! The moveable stop pins on the plate housing guarantee a secure hold during transport. The STriMo consists of a hard anodized aluminium plate including handle, three solid ball rollers and four moveable stop pins. The STriMo can take a load of up to 300 kg per ball roller (= 900 kg total load)!

No more strenuous bending when taking parts out of a container Increases production while reducing sick leave Heavy containers and skeleton containers can be transported as easily as with a pallet truck ´ Container can be tilted hydraulically with a footpump in an angle of 0 90 degrees to achieve the best working position

The secutex protective sleeve is optimally coordinated from a technical standpoint for the spanset lashing belt programme or the spanset round slings. The contact side is coated with secutex. It is extremely resistant and minimizes the buildup of wrinkles in the textile. The secutex protective sleeve with singlesided coating can be easily pushed over lifting equipment and protects against damage caused by “sharp edges” and the rough edges of the lifting equipment and the load at the same time.

Mobile motorized traction sheve hoist for any lifting height, flexible and economic assembly and installation work. Simple operation for working safely at heights. Gsmartrac is a material rope traction hoist which drives a sheathed rope without rolling it up. This means any height can be reached. Electronic motor protection prevents overloaded lifting operations, giving your hoist long lasting service life with low wear. Please contact us for further information or technical details!

These can optionally be equipped with lifting frames or robots. Automatic powder coating booths Automatic powder coating booths can be used for a very wide range of applications today. Depending upon the planned application, they can be equipped with lifting frames or also robots. The component geometry can be precisely determined via upstream light curtains in order to apply the powder to the desired places and to avoid excessive use of powder. Rippert is naturally also well-versed in explosion protection.

safety factor: 7:1, material 100 % polyester, easy to handle, light-weight and insensitive to heat, cold and moisture; temperature range: -40°C to +100°C. For safe lifting of loads

Types available Type LH-I -suitable for 1 fork sleeve or crane -can be secured to prevent slipping -with rotating hook -load capacity 1000 kg Type LH-II -suitable for 2 fork sleeves (also for straddle stackers) -can be secured to prevent slipping for different breadth of forks -with rotating hook -different load capacities

-The original BAUER shovel for handling and transporting bulk materials -simple pick-up using forks -can be emptied at any height by cable operated from the driver‘s seat -body walls with reinforced edging -special steel blade trim -sturdy frame -can be secured to prevent slipping Types available -Type BSE mechanical -Type BSE-H hydraulic -Type BSM mechanical, with trough opening for forks -Type BSM-H hydraulic, with trough opening for forks -Type BSI mechanical

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway

-sturdy steel construction -suitable for crane and fork lift trucks -pick-ups for BIG-BAGS

safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load

The MIXACO discharge stations are used for dust free emptying of the product into the further processing step (e.g. dosing system into an extruder). The container is fixed in place when moved into the discharge station. Two different executions are available: Type Guide fork Type Platform Differentiated by the way of feeding the container. Type Guide fork The movable container is pushed by means of its own wheels into the discharge station type guide fork and is locked in place. A pneumatic coupling is used to connect the discharge pipe to the container discharge valve. Type Platform The container is placed onto the emptying station with the aid of a lifting device (crane or forklift). Equipment Positioning of the container Pneumatic coupling between container and the further production step Pneumatic rotary cylinder for automatic opening / closing of the container discharge valve (0/90°)