Lifting accessories - Import export

ight and compact transport aid for fast and flexible transport of large loads! For use on concrete and industrial floors! Non-locking steering and smooth travel guaranteed even with heavy loads. Due to the low overall height of the transport trolley, the load only needs to be lifted slightly! Danger of tipping over minimized due to low body! The moveable stop pins on the plate housing guarantee a secure hold during transport. The STriMo consists of a hard anodized aluminium plate including handle, three solid ball rollers and four moveable stop pins. The STriMo can take a load of up to 300 kg per ball roller (= 900 kg total load)!

The protection against „sharp edges“ Alongside other factors such as temperature, chemical environment and mechanical loads, the „sharp edge“ remains one of the main causes of damage to the lifting accessory itself and frequent cause of accidents. Most damage on sharp or rough edges is the result of load movement perpendicular to the load lifting accessory. If the edge is „sharp“ it can, in a worstcase scenario, cut through the lifting accessory. If the load moves laterally, a cutting movement takes place at the edge. Much like the blade of a knife, the edge can cut through the fibres of the textile lifting accessory. For loads with a „sharp edge“ or with a rough surface, a protective sleeve or fixed coating is recommended to protect the textile lifting strap.

The form and surface of the edge have a significant effect on the durability of the lifting accessory. Very rough surfaces, such as tsleeve of precast concrete products, can quickly damage the lifting strap or cable. If nothing moves, there can be no wear. The cutresistant secutex protective sleeve sits firmly against the edge and the textile lifting strap runs reliably through the protective sleeve.

If the edge radius is smaller than the thickness of the lifting strap, the edge is considered „sharp“. Lateral motion or pressure alone may be enough to cut through the textile fibres of the lifting strap. The 56 mm secutex coating sits between the load and the textile load lifting accessory. The edge radius is increased by this layer. The edge is no longer sharp against the lifting strap and lift forces are directed away from the edge.

secutex protective sleeves protect loads and textile lifting accessories against marks left by handling. If an edge exceeds the range covered by the norm, the usual textile lifting accessories can no longer be used in conjunction with the secutex protective sleeve. If the edge radius of a load is less than 2 mm, lifting experts refer to it as a “critically sharp edge“. secuwave and secuwave Mini are thicklycoated protective sleeves with a wave structure on the contact side. The wave structure increases the bending radius of “sharp edges”. The edge lies in a wave trough, while the load rests on the wave peak. Therefore, the “sharp edge“ has no contact with the protective sleeve. secuwave is delivered as a clip. This means that it can be subsequently added to a lifting situation. secuwave is available in two versions. The various sizes mean that the suitable wave size can be used. The smaller wave size means that the thick coating is more flexible in the bending direction.

When lifting machinery components, there are always edges and surfaces which are insufficiently protected by regular edgeprotectors and protective sleeves. Textile load lifting accessories cannot always be used, as the cables or chains being used press against the load with extreme pressure. Damage to the often expensive and highlymachined components is often unavoidable and the edges must be reworked at great cost. The secuPad is DIN A4 size and can easily be placed at critical locations by hand. It consists of multiple textile layers joined together on every side. It adapts flexibly even to difficult contours. The surface is coated in Powerflex and protected against abrasion and the penetration of shavings and lubricants.

secutex coated lifting straps gently adapt to the „sharp edges“ of the load. The extreme structural resistance of the secutex material safely prevents any cutting of the load lifting accessory. For very „sharp edges“ the coated lifting strap is preferable since it reliably prevents movement over the edge. We offer two different types of fixed coating. The secutex fixed coating protects the single sided secutex coating against cuts to the loadbearing textile.The reverse side is protected against abrasion and dirt by the Powerflex thin coating. The lifting straps with secutex fixed coatings are very flexible and easytouse. The twosided fixed coating provides allround protection to the lifting strap, offering double security. This means that both sides can be used as contact sides. Dangerous mixups are now a thing of the past.

Mobile motorized traction sheve hoist for any lifting height, flexible and economic assembly and installation work. Simple operation for working safely at heights. Gsmartrac is a material rope traction hoist which drives a sheathed rope without rolling it up. This means any height can be reached. Electronic motor protection prevents overloaded lifting operations, giving your hoist long lasting service life with low wear. Please contact us for further information or technical details!

Types available Type LH-I -suitable for 1 fork sleeve or crane -can be secured to prevent slipping -with rotating hook -load capacity 1000 kg Type LH-II -suitable for 2 fork sleeves (also for straddle stackers) -can be secured to prevent slipping for different breadth of forks -with rotating hook -different load capacities

safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load

safety factor: 7:1, material 100 % polyester, easy to handle, light-weight and insensitive to heat, cold and moisture; temperature range: -40°C to +100°C. For safe lifting of loads

-sturdy steel construction -suitable for crane and fork lift trucks -pick-ups for BIG-BAGS

-The original BAUER shovel for handling and transporting bulk materials -simple pick-up using forks -can be emptied at any height by cable operated from the driver‘s seat -body walls with reinforced edging -special steel blade trim -sturdy frame -can be secured to prevent slipping Types available -Type BSE mechanical -Type BSE-H hydraulic -Type BSM mechanical, with trough opening for forks -Type BSM-H hydraulic, with trough opening for forks -Type BSI mechanical

-steel construction -fork sleeves for pick-up -also for straddle stackers secured by chain to prevent slipping -1 rotating hook -spray painted or hot-dip galvanized Types available -Type LA 1600/2400 rigid construction -Type LA 25 rigid construction , inclination 25°, with stirrups 100 mm ground leeway -Type LAT 25 inclination 25°, variable working height, can be fixed in each position, with stirrups 100 mm ground leeway