Inner tubes - Import export

The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips The troubleshooter for energy supply systems in the chip area - available in 4 sizes. Chips and dirt can affect the service life of cables and hoses significantly. With the RX system, igus® offers an extremely tight plastic e-tube that is nonetheless very easy to open. Snap-open in the outer radius A smooth, curved outer contour prevents chips from sticking Injection-molded "sealing lips" all around No holes, cracks, undercuts Series RX40 is IP40 tested (TÜV Saarland) Interior separation and guide trough available Covered pin/hole connection and stops "RBR" version with bending radius on both sides available Typical branches of industry Machine tools All applications in the direct chip sector Applications exposed to dust and dirt General mechanical engineering Dimensions and technical datas RX e-tubes Chip tests in the igus® laboratory demonstrate the tremendous chip-proof properties of the igus® RX tube. Chip-proof - for all types of chips and applications RX32 Inner height hi: 42 mm Inner widths Bi: 80mm Bending radii R: 80 - 250 mm Pitch: 32 mm RX E-Tube RX40 Inner height hi: 52 mm Inner widths Bi: 100 mm bending radii R: 100 - 300 mm Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water - Various tube types were submerged under water. The new RX tube needs over 30 seconds until it is filled up, thus proving its high leak tightness Y = time in seconds A = igus® products B = competitor Chip penetration test - Various types of tube were exposed to a defined quantity of chips. In the new RX tube, after 80,000 cycles only 0.2 g of chips were found in the interior Y = chip mass [g] A = igus® RX e-tube RX40.100.100 251.900 cycles B = igus® e-tubes 68.10.100.0 256.132 cycles C = test tube 01 250.907 cycles D = test tube 02* 2.600 cycles *Teststop after 2.600 cycles E = igus® products F = competitor E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Productfinder Assembly instruction Dismantling / assembling a cover, replacing a chain link and assembling / inserting the RX tube. Assembly instruction Configure interior separation Define cables, select chain and configure interior separation. Now also for RX tubes! Interior separation configurator Application examples Applications in various industrial sectors. RX tubes Series RX - new chip-proof design, small pitch, removable cover 1 Chip-proof design without undercuts and edges 2 Excentric locking 3 Material igumid G 4 rounded shape 5 covered pin/hole connection RX tubes IP tested Technical report TÜV NORD red dot 2011: honourable mention for RX40 iF-Design-Award for RX e-tubes ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 classification on request e-tubes available as special design with HT material for 850°C hot chips

Other information Installation video: Instructions for the opening and closing of the E-Tubes Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request Other information Series R117 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the inner radius on both sides Series R118 Inner height hi: 21 mm Inner widths Bi: 20 - 100 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, snap-open along the outer radius on both sides Series R157 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the inner radius on both sides Series R158 Inner height hi: 40 mm Inner widths Bi: 40 - 200 mm bending radii R: 100 - 250 mm Pitch: 46 mm E-Tube, snap-open along the outer radius on both sides Series R167 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the inner radius on both sides Series R168 Inner height hi: 50 mm Inner widths Bi: 50 - 250 mm bending radii R: 100 - 300 mm Pitch: 58,8 mm E-Tube, snap-open along the outer radius on both sides Installation video: Instructions for the opening and closing of the E-Tubes E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E-Tubes. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E2 R100 and E2 R Chip protection, swivelable Excellent protection against chips (even hot chips) Rugged and tight Snap-open alternately along inside or outside - Swivelable or removable lid, short installation time Space-saving through good internal/external dimensions ratio Modular interior separation options Double stop dog system for longer service life and long, unsupported lengths Universal KMA mounting brackets with potential for "all-round" fastening Typical industrial sectors and applications Machine tools Timber Processing Machines General mechanical engineering etc In all areas exposed to dirt and chips iF-Design-Award for Series R117/R118 and Series R68 ESD classification: Electrically conductive ESD/Atex versions on request UL94-V0 Classifications on request E-Tube made of igumid HT: Hot chips (to 850°C) cannot burn into it. Supplied as a special design on request

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.

Nominal Bore (DN) ▪ DN2 = Version A and B ▪ DN4 = Version C and D Max. Working Pressure (PN) ▪ DN2 = Version A: 400 bar / 5801 PSI ▪ DN2 = Version B: 630 bar / 9135 PSI ▪ DN4 = Version C: 340 bar / 4931 PSI ▪ DN4 = Version D: 630 bar / 9135 PSI Min. Burst Pressure ▪ DN2 = Version A: 1100 bar / 15954 PSI ▪ DN2 = Version B: 1900 bar / 27557 PSI ▪ DN4 = Version C: 850 bar / 12328 PSI ▪ DN4 = Version D: 1900 bar / 27557 PSI Materials ▪ Inner / outer tube made of PA ▪ Reinforcement made of Synthetic Fibre

Designed for direct installation into return lines to reduce fluid aeration, foaming and noise; should always be installed below the minimum fluid level Features ▪ Available with female BSP thread (ISO 228) or female NPT thread (ANSI B1.20.1) Design and Materials ▪ 2 concentric tubes with inner spaced holes ▪ Installation below the minimum fluid level of the reservoir with the plain area facing the pump inlet ▪ Threaded end cap made of Aluminium ▪ Other components made of Steel, zinc-plated Special sizes, designs, materials and configurations are available on request. Consult STAUFF for details. Media Compatibility ▪ Suitable for use with Mineral and Petroleum based hydraulic fluids (HL and HLP) Technical Data ▪ Operating temperature range: -20 °C ... +100 °C / -4 °F ... +212 °F ▪ Max. working pressure: 20 bar / 290 PSI