Industrial installation - Import export

Applications: HVAC / Environmental Technology / Project Management and Engineering Design Capabilities One-piece body, centric disc Operating temperatures up to 900°C, depending on material selection Wafer type body for flanges according to DIN 24154 or DIN 12220 Face-to-face length according to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211

Applications: Shipbuilding / Mechanical and Plant Engineering One-piece body, centric disc Operating temperatures up to 800°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length acc. to DIN EN 558-1 R20, from DN400 acc. to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266 SIL certification according IEC 61508 and IEC 61511

Applications: Industrial Combustion Technology / Steel Industry One-piece body, tight-closing, centric disc Lug-type body for flanges according to DIN EN 1092-1 or ASME B16.5 Face-to-face length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1. permissible operating pressure 5 bar For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s)

Applications: Mechanical and Plant Engineering / Renewable Energy Technology / Shipbuilding One-piece body, centric disc Operating temperatures up to 800°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard or individual customer specifications Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266

Applications: Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 permissible operating pressure 10 bar, from DN 350 ≤ 1.5 bar For all flammable gases according to EN 437 and other neutral gases Approval according to DIN EN IEC 61511, up to and including SIL 3

Applications: Environmental Technology / Mechanical and Plant Engineering / Renewable Energy Technology One-piece body, centric disc Also available as multi-blade version Operating temperatures up to 900°C, depending on material selection Flanged body according to DIN 24193 or customer specification Face-to-face length according to manufacturer’s standard or individual customer specifications Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266

Applications: Combustion Engines and Test Bench Technology / Industrial Combustion Technology HRD / HRA high-temperature version One-piece body, centric disc Operating temperatures up to 1050°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length acc. to DIN EN 558-1 R20, from DN400 acc. to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266 SIL certification according IEC 61508 and IEC 61511

Applications: Industrial Furnaces / Steel Industry / Industrial Combustion Technology One-piece body, centric disc Operating temperatures up to 550°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length acc. to DIN EN 558-1 R20, from DN400 acc. to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266 SIL certification according IEC 61508 and IEC 61511

Applications: HVAC / Environmental Technology / Project Management and Engineering Design Capabilities One-piece body, centric disc Operating temperatures up to 900°C, depending on material selection Flanged body according to DIN 24154 or DIN 12220 Face-to-face length according to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211

Applications: Mechanical and Plant Engineering / Industrial Combustion Technology / HVAC One-piece body, tight-closing, centric discs With blow-out proof shaft Wafer type and lug type for flanges according to DIN EN 1092-1 and ASME B16.5 / B16.47 Exchangeable liner in various elastomer materials Maximum operating pressure: 20 bar, depending on configuration Insulatable according to EnEV Face-to-face length according to DIN EN 558-1-R20 Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266

Applications: Steel Industry / Industrial Combustion Technology / Industrial Furnaces

Applications:Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc With blow-out proof shaft Design for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to DIN EN 558-1-R20 Leakage rate A according to DIN EN 12266-1 permissible operating pressure 10 bar, from DN 350 ≤ 1.5 bar For all flammable gases according to EN 437 and other neutral gases Safety shut-off valve according to EN161 class A (closing time < 1s) Approval according to DIN EN IEC 61511, up to and including SIL 3

Applications: Steel Industry / Industrial Combustion Technology / Renewable Energy Technology One-piece body, tight-closing, centric disc Design for mounting between flanges according to DIN EN 1092-1 or ASME B16.5 Face-to-face length according to DIN EN 558-1-R20. Leakage rate A according to DIN EN 12266-1. permissible operating pressure 5 bar For all gases according to DVGW worksheet G 260 Safety shut-off valve according to EN161 class A (closing time < 1s)

Applications: Industrial Combustion Technology / Renewable Energy Technology / Environmental Technology / Industrial Furnaces One-piece body, centric disc Operating temperatures up to 800°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211 Inspection according to DIN EN 12266

Applications: Industrial Combustion Technology / Renewable Energy Technology / Environmental Technology / Industrial Furnaces One-piece body, centric disc Operating temperatures up to 620°C, depending on material selection Wafer type body for flanges according to DIN EN 1092-1 or ASME B16.5 / ASME B16.47 Face-to-face length according to manufacturer’s standard Mounting flange for actuators according to DIN EN ISO 5211

Applications: Industrial Combustion Technology / Steel Industry One-piece body, tight-closing, centric valve disc With blow-out proof shaft Version for mounting between flanges according to DIN EN 1092-1 Face-to-face length according to manufacturer’s standard Leakage rate A according to DIN EN 12266-1 permissible operating pressure 2 bar For all flammable gases according to DVGW worksheet G 260, EN 437 and other neutral gases Safety shut-off valve according to EN161 class A Approval according to DIN EN IEC 61511, up to and including SIL 3

Brass types for stamping paper, wood and synthetics. In the pharmaceutical industry brass types are installed in packaging machines with corresponding brass type holders and give the product the labelling. Batch labellings, manufacturer coding and process data are thereby stamped flexibly. If you request changes, the types used can be replaced.

InduStrip IHS radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators can also be used outdoors like on sports stands or loading ramps to keep them dry and frost-free. Robust industrial design, galvanized steel casing, high-gloss aluminum reflectors.

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G1 1/2 are mainly used to heat water and aqueous solutions. 3 tubular heating elements ø 8,5mm made of stainless steel 1.4404 resp. Incoloy 825 brazed in G1 1/2″ thread made of brass (lead free) or stainless steel. Connection to 230/400 V3 (N), rotatable stainless steel terminal box. Use e.g. in washing machines, dishwashers, tempering equipment, laboratory equipment. The heaters are also suitable for water heating with photovoltaics, primarily the EHK G1128xxx series. Combination with all common PV controls possible, stepless power output. Type EHK G112-A with built-in thermostat 0-95°C Type EHK G112-AB with built-in thermostat/limiter 30-80°C / 100°C Type EHK G112-U without integrated control unit

Screw-in heaters are versatile and intended for heating liquid media in industrial and commercial applications. When selecting, the specific surface load permitted for the respective medium must be observed and checked by the customer. EHK G2 are mainly used for heating hydraulic oil in containers in which the replacement of the heating cartridge without draining the medium must be possible. Ceramic heating cartridge in stainless steel tube ø 50mm, material-no. 1.4512 or material-no. 1.4404. G2″ thread SW70 welded from V2A. Terminal box made of PA6-GF30, impact-resistant and oil-resistant, degree of protection IP66/67. Unheated zone 50mm, surface load 1,5 W/cm², voltage 230/400 V. Special versions on request.

Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations

InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.

Monitor swivel arms for ergonomic workstation design The monitor mountings from RK Rose+Krieger allow for an optimal view of the monitor or a control panel. The range of action can be increased even further by using a swivel arm. This may be useful for carrying out set-up work on machinery for example, or if the monitor is having a disruptive impact on the working environment. There is also the option of expanding the support arm with two support tubes (twin version) to include a sturdy keyboard tray. The modular design of the RK swivel arm/support arm system allows for varied combination options and helps to adapt workstations to the most ergonomic arrangement.

RK monitor mounting – high-strength, flexible and individually adaptable VESA or universal mount for connecting monitors, displays or control panels. Monitors, touch screens, displays and control panels are used every day, and not just in the office. Industrial machines and systems are programmed or performance data displayed on modern touch screens or control panels. In utility vehicles, camera monitoring systems facilitate resetting and navigation devices make positioning possible. On conveyors, monitors make it possible to monitor and visualise all sorts of processes. Today, control panels or flat screens are often an essential component of modern assembly workstations, too. Standard systems are generally designed for office applications. Industrial environments push these monitor mountings to their limits. For example, they normally can carry loads of only six to twelve kilograms and are not robust enough for use on machines, systems or assembly workstations.

trak | powerpack lion is a highly efficient, modular lithium-ion traction battery system consisting of a lithium-ion battery, an HF charger and an integrated battery management system. This lithium-ion battery system is a universal retrofit solution. The traction battery system can be installed in industrial trucks originally designed for lead-acid batteries. Thanks to the HOPPECKE trough system, no vehicle-specific adaptations are required. In addition, several models with different capacities are available. trak | powerpack lion is particularly suitable for 24/7 operation. HOPPECKE has all the relevant technologies for industrial truck drives in its portfolio and provides its customers with comprehensive advice. The focus is on the total cost of ownership (TCO) and the return on investment (ROI) for the respective requirement.

The LevelEx is available in sizes M16 to M63 or with NPT threads from 3/8" to 2 1/2". PFLITSCH manufactures the cable gland bodies from bright brass, galvanised nickel-plated brass and corrosion-free stainless steel. The LevelEx achieves protection class IP 66 or IP 68 and corresponds to the ignition protection types flameproof enclosure "Ex-d" and increased safety "Ex-e". With its wide temperature range of -60 °C to +130 °C and approvals according to ATEX and IECEx, the LevelEx can also be used under extreme environmental conditions. For armoured cables, PFLITSCH offers the LevelEX AC. It has the same technical quality as the proven LevelEx for non-armoured cables. In addition, it convinces with additional properties. For example, it scores with an innovative design for accommodating armoured cables: Two opposing windows in the armour clamping allow the correct seating of the cable armour to be checked immediately.

Specially designed for industrial hydraulic installations, the STAUFF Offline Filters are available in single or multiple housing configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motor Clogging Indicator (available as an option) ▪ Visual clogging indicator ▪ With water sensor Filter Elements ▪ Filter elements of SRM series Construction ▪ Offline filters with integrated motor/pump unit ▪ Heated offline filter unit Nominal Flow Rate ▪ Max. 4,2 l/min / 1.2 US GPM Max. System Volume ▪ Up to 2.700 l / 713 gal Water holding capacity ▪ Up to 2.280 ml / 80 oz. Materials ▪ Anodizied Aluminium

STAUFF Systems Units are characterised by their extremely efficient filter elements which are rated to 0,5 micron. Specially designed for industrial hydraulic installations the STAUFF Offline Filters are available in single or double length configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Units ▪ Different configurations available ▪ Air driven motors Clogging Indicators (available as an option) ▪ Visual clogging indicator Filter Elements ▪ Filter elements of SRM series Pre-Filter Elemets ▪ Spin-On filter elements of SF67 series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55...

Bespoke solutions for all structures requiring corrosion protection. Our specialists develop new components and undertake research to optimise corrosion protection. They design, build and monitor corrosion protection systems for pipelines, compressor and pumping stations as well as industrial installations, and provide advice, expert opinions and studies. We can calculate the degree of high-voltage interference on pipelines and build protection systems to prevent hazards for individuals as well as AC corrosion. Further information with a full description of our services is provided in our brochure entitled “Intelligent Corrosion Protection”. As a customer you will receive technically sophisticated, efficient and effective products and services from a single source: Germany´s competence leader, e.g. Passive corrosion protection High-voltage interference & AC corrosion Accredited expert services Condition assessment Training