Import-export - Import export

Retractable Power Distributor/power bollard SV501 for indoor and outdoor use, made of saltwater-resistant aluminum. Due to its solid construction, the SV501 lowering distributor can be driven over by a truck, of course, only when the lid is fully closed. The surface is anodized with a stainless steel look. The retractable power distributor SV501 is equipped with 8 protective contact sockets 2 / 16A 230V with hinged cover (unsecured, without wiring). The devices are raised and lowered using a crank. Drainage is required for outdoor installation. The housing is watertight when closed, protection class IP67. Alternatively, other combinations are also possible. Further equipment variants and colors on request.

Round hollow floor tank 9908A with a housing made of sendzimir galvanized sheet steel, rim and lid made of solid aluminum with a lid for laying on. The cover also closes in a straight or angled shape when a standard plug is plugged in. The reversible lid is anodized in natural aluminum or can be covered with a carpet, etc. Other equipment variants on request.

Raised access floor power system 8512BK with 12 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request.

Raised access floor power system 9904AK with height-adjustable floor socket and 4 slots. The housing is made of sendzimir galvanized sheet steel, the frame and the insert lid are made of solid aluminum. The lid is anodized in natural aluminum and can be fitted with floor coverings. It closes even when the standard plug is inserted. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further configuration variants on request.

Hanging distributor HV1006 made of stainless steel with 6 units: three Schuko sockets with VDE certification, one CEE 5/16A 400V/6h socket with VDE certification, one RJ45 double CAT6A and a compressed air coupling. Ideal for use in workshops. The hanging distributor HV1006 is delivered with hooks and carabiners (without cables, hoses and wire ropes shown).

Aluminum leveling ring 12251 for floor socket 7702A and 7704A for use in wooden floors or raised access floors. The leveling ring is attached to the floor socket with screws and screwed onto the floor from below. The delivery takes place with grub screws, but without illustrated fastening screws and illustrated floor socket.

The plastic insert 12108 serves as a screed placeholder for the floor socket 9902A and 9902D.

Rain protection set 12255 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7702A and 7704A. The rain protection set offers ideal protection against rain with plugged-in connections.

CEE floor tank 6523Q with a stainless steel housing. The lid closes watertight, protection class IP 65, and has an internal tube for using the tank when the lid is closed. Degree of protection with tube: IP21. Further configuration variants on request.

The CEE floor box 6610A consists of a housing in stainless steel 1.4301 (3 mm) and a lockable, 20 mm thick lid made of anodized aluminum. When closed, the CEE floor box is not waterproof. In the outdoor area, a drain pipe must be provided on-site to drain the housing. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request.

The CEE floor tank 6620A consists of a housing made of stainless steel 1.4301 (3 mm) and a 20 mm thick cover made of anodized aluminum that can be closed with a tool. When closed, the CEE floor tank is not waterproof. In the outdoor area, a drainage pipe must be provided on site for the housing to be drained. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in plugs. Other equipment variants on request.

Round CEE floor tank 7012A with lockable lid made of saltwater-resistant aluminum. Due to the massive construction, the CEE floor tank is accessible by car. When closed, it is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration variants and colors on request.

CEE floor tank 8314A made of solid aluminum with lockable hinged lid. Easy opening and closing of the lid thanks to a snap lock integrated in the lid. When closed, the floor tank is splash-proof and therefore also suitable for wet sweepers. The frame and lid surface are anodized in natural aluminum. Further colors and configuration variants on request.

Wall socket 5501A with one slot, splash-proof, with protection class IP44. The hinged lid can be locked with a key and is therefore primarily protected against unauthorized use. The storage box is made of sendzimir galvanized steel sheet. The frame and the lid are made of solid aluminum and anodized in natural aluminum. Further colors and equipment variants on request.

Wire forms can have a shape that is limited almost only by fantasy. Many of them have some kind of spring functionality, for example some quick fastening applications. In most products, the material is stressed in bending and they can be looked upon as leaf springs made from wire. Wire forms are manufactur

Multi-coil wave springs are made from flat-rolled spring wire that is coiled to a helical shape and the coils are at the same time given a sinus shaped wave form. The force-deflection relation is created by flattening out the wave form when the spring is compressed. The function is hence like a helically shaped leaf spring.

Volute Springs are used as compression springs and made from flat material coiled to a volute. The coils of the material overlap each other and are guided radially by each other during compression, thus giving the spring a stability against buckling that cannot be achieved with conventional compression springs.

Torsion bar springs is a good alternative to clock springs or helical torsion springs, when a rotational torque is needed in applications where the spring shall fit into a space that is limited radially, but with lots of space axially.

Most common ends are different types of end loops and hooks, there are also a wide range of other mechanical attachment possibilities such as coiled in and screwed in attachments. Examples are, half hooks, German loops, English loops, extended hooks, side hooks, side loops, screw plugs and screw shackles.

A snap or retaining ring is a fastener or retaining ring that consists of a semi-flexible metal ring with open ends that can be snapped into place. It fits in a groove on a shaft or inside a bore and locates the shaft axially in one direction.

A Garter Spring is a circular ring made from a coiled helical spring bent into a circle and with the two ends connected to each other. A garter spring will create a radial force directed towards its center when the radius of the garter spring increases.

Disc springs (also called Belleville springs) are geometrically a cylindrical washer with a slightly conical shape. It is used as compression spring and is the best solution when forces are high and travel relatively limited. This type of springs can or in parallel, which increases travel and/or force.

Constant Force Springs are manufactured from flat strip material and spooled to a specific curvature matching the needed pull force. There is practically no limit on extension speed and acceleration. The springs can be fitted in a number of ways and extended partly or completely.

Compression springs is the most common type of springs. The majority of compression springs are cylindrical and linear, but to this group belongs also conical, barrel shaped, tapered out ends and more. The design can be adjusted to fulfill a wide range of requirements concerning spring characteristic.

Clock Springs – also called hair springs – is a torsion spring that is optimum for installation spaces that are limited axially, but with more space radially. They are made from strip material or flat rolled wire that is wound in a flat, spiral shape.

Lesjöfors manufactures deep drawn parts to customers individual requirement in press machines by either progressive tool or transfer tool solutions as well as opportunities for less automated solutions in case of low volume requirement.

We manufacture bushings using either bending technology or stamping technology. This production type provides a cost-effective alternative to other time- and material-consuming manufacturing processes.

Wave Washers are washers with a wave form and gives an axial force when the waves are flattened out during compression. The function is similar to wave springs, but wave washers have only one coil

We have over 150 years spring manufacturing experience, and today produce the world’s largest range of coil springs for the automotive aftermarket. In addition to replacement coil springs, we also stock market leading ranges of Gas, Leaf and Sport springs.