Results for
SANHA GMBH & CO. KG
Germany
The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!
Request for a quoteSANHA GMBH & CO. KG
Germany
Practical, time-saving foam installation box with preconfigured multilayer pipe and fittings / connections for radiators. For masonry walls. Distance between flow and return flow 50 mm, with thermal and sound insulation as well as condensate protection. 2 MultiFit-Flex multilayer pipe connections dimension 16 mm. Box dimension: 120 x 95 x 50 mm (length x width w/o plate/width with plate x depth)
Request for a quoteSANHA GMBH & CO. KG
Germany
SANHA prefab installation box for cold water meter installation in masonry construction, with thermal and sound insulation, condensate protection. Foam body with multilayer pipes and fitting connections inside. 1 water meter base unit and 1 straight cutoff valve, 2 female threaded ends Rp 3/4, 240 x 350 x 70 mm
Request for a quoteSANHA GMBH & CO. KG
Germany
The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications! The practical SANHA-Box range comes in many versions: Preconfigured boxes are available for wash basins and sinks, through baths and showers, and onto water meter connections. All SANHA-Boxes are also available with already isolated multilayer plastic pipes. A complete overview of our product portfolio and the complete range of accessories can be found in our brochure – or simply call us at +44 1628 819245!
Request for a quoteSANHA GMBH & CO. KG
Germany
The entire SANHA-Box range for drinking water installations is made exclusively from silicon bronze CuSi lead-free system press fittings which emit no harmful lead into the drinking water – not only do you save substantial time and installation costs, you also gain the knowledge that your installation reliably meets the stringent drinking water regulation specifications!
Request for a quoteSANHA GMBH & CO. KG
Germany
SANHA-Box for dry-wall construction, radiator installation. The SANHA-Box greatly reduces labour in dry-lining applications. Cavities, noise insulation or stability are real challenges. The SANHA-Box allows robust and very precise installation of all pipes, fittings, etc. including mounting frames and cross-members
Request for a quoteSANHA GMBH & CO. KG
Germany
Prefabricated time-saving SANHA-Box for dry-wall construction, bath and shower connections. With sound insulation.
Request for a quoteSANHA GMBH & CO. KG
Germany
Fully preconfigured time-saving SANHA installation box for dry-wall construction, with two sink connections, for dry masonry walls. Integrated sound insulation and condensate protection.
Request for a quoteSANHA GMBH & CO. KG
Germany
SANHA-Box for dry-wall construction, sink connection
Request for a quoteSANHA GMBH & CO. KG
Germany
Pre-configured foam insulated installation box 25-WL-WT-T for wash basins, for use in dry wall constructions. The box provides thermal insulation and condensate protection through its foam body. With two female threads Rp 1/2 and two MultiFit®-Flex (multilayer pipe) system pipe connections 16 mm as well as drainage connection 50 mm. Overall dimension: 200 x 350 / 40 x 70 mm (Length x width w/o plate/width with plate x depth).
Request for a quoteSANHA GMBH & CO. KG
Germany
Sink installation box for Masonry, with thermally insulated and condensed water Insulating body, with plasterable Surface, with 2 internal threads Rp 1/2 and 2 MultiFit-Flex System pipe connections 16 mm and drain connection 50 mm, Dimension * 270x160x70 mm
Request for a quoteSANHA GMBH & CO. KG
Germany
Washing machine assembly box for masonry, with thermally insulated and condensation-proof body, with plasterable surface, with 1 internal thread Rp 1/2 and 1 MultiFit-Flex system pipe connection 16 mm and drain connection 50 mm, dimension 270 x 200 x 70 mm
Request for a quoteSANHA GMBH & CO. KG
Germany
SANHA-Box for dry-wall construction, with two bath and shower connections
Request for a quoteSANHA GMBH & CO. KG
Germany
Preconfigured installation box (SANHA®-Box 25-BWDU-M) from foam for masonry construction, with bath and shower connections, multilayer pipe and fittings already installed inside. Saves time (up to 70 % less), insulates sound and prevents humidity.
Request for a quoteSANHA GMBH & CO. KG
Germany
Prefabricated time-saving SANHA-Box for dry-wall construction, bath and shower connections. With sound insulation.
Request for a quoteSANHA GMBH & CO. KG
Germany
3fit System press fittings made of lead-free silicon bronze CuSi for use in a system with MultiFit®-Flex and MultiFit®-PEX multi-layer plastic pipes by SANHA according to DVGW W 542 (for drinking water and heating installations) as well as copper pipes. More information on the adequate pipes under "Safe connection" below. The 3fit®-Press system is approved according to DVGW W 534.
Request for a quoteSANHA GMBH & CO. KG
Germany
Practical system push fittings with safe and innovative lock function from copper alloys for use in a system with SANHA MultiFit®-Flex and MultiFit®-PEX multi layer plastic tubes for hygienic drinking water and reliable heating installations. Due to their sophisticated construction, SANHA system push fittings offer an especially safe and durable connection and are just as tight as press fittings. The push connection is easy to make and has the distinct advantage that no tools are required. In this way, using 3fit®-Push fittings incurs no cost for buying, repairing or maintenance of press machines. 3fit®-Push system fittings are ideally suited in narrow spaces where it might be difficult to press fittings with jaws or slings such as during the renovation of buildings.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SANHA GMBH & CO. KG
Germany
The SANHA®-Heat cross tees and distributors on one or two levels provide an optimal solution for both new construction as well as for the housing stock. Tees and distributors can be installed within the heat and footfall insulation in a way that saves time, money, and space. For a particularly easy and time-saving connection of radiators SANHA also offers a nickel-plated CU-VN-block including insulated box available.
Request for a quoteSANHA GMBH & CO. KG
Germany
Fully preconfigured SANHA installation box for dry-wall construction, with two wash basin connections. With sound insulation and condensate protection. One female threads Rp 1/2", one multilayer pipe connections 16 mm. 270 x 350 x 70 mm (length x width w/o plate/width with plate x depth).
Request for a quoteSANHA GMBH & CO. KG
Germany
Washing machine installation box with through-flow circulation pipes for drywall construction, with thermally insulated and condensate-proof insulating body, with 1 internal thread Rp 1/2 and 2 MultiFit-Flex system pipe connections 16 mm and drain connection 50 mm 50 mm, dimensions 270 x 350/430 x 70 mm
Request for a quoteFRIEDR. FREEK GMBH
Germany
Advantages of Heating Plates with Square Cartridge Heaters: -> Simple plate manufacture due to rectangular groove geometry, no deep-hole boring -> Simple heater installation by bending and pressing along the plate surface -> Complex plate geometries with bores and openings -> Optimal heat transfer due to 75% surface contact -> No casting with heat conductive compound -> Uniform temperature profiles due to thermally optimized groove layouts/power distribution and utilization of insulation plates -> high process temperatures (up to 450°C in aluminium, up to 700°C in stainless steel) Example "Heated Stamp": D=100 mm out of tempered tool steel up to max. 700°C continuous temperature. Fitted with 2 Square Cartridge Heaters 1500 W/ 230 V, 4,5 x 4,5 mm x 600 mm, with 50 mm unheated at the termination end. Annealed and formable with a nickel sheath, resistant up to 850°C surface temperature. Connection by fibreglass insulated pure nickel high-temperature leads (max. 500°C)
Request for a quoteANTHERMO GMBH
Germany
Temperature control of gaseous and liquid media Flat tube heat exchangers are generally used as air / air or air / liquid heat exchangers. Flat tube heat exchangers are used where the (exhaust) air is polluted and the installation space is limited. In heat recovery in particular, there are numerous applications for flat tube heat exchangers as so-called exhaust gas / exhaust air heat exchangers. Little installation space and less pressure loss While the rows of tubes in smooth tube heat exchangers consist of round tubes, the rows of tubes in flat tube heat exchangers have a special profile (see illustration). This special tube profile offers advantages over the round profile in certain applications. Flat tube heat exchangers require less installation space than smooth tube heat exchangers with the same exchange area and are therefore also lighter.
Request for a quoteANTHERMO GMBH
Germany
Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.
Request for a quoteANTHERMO GMBH
Germany
Temperature exchange between a gas and a liquid In the case of air-water heat exchangers (also called gas-water heat exchangers), there is a temperature exchange between a gas (usually air) and a liquid. Finned heat exchangers can cover various areas of application: - heating and evaporating, - cooling and condensing as well as heat recovery. In this context, lamellar heat exchangers are also called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs are attached to the pipe system.
Request for a quoteANTHERMO GMBH
Germany
Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.
Request for a quoteANTHERMO GMBH
Germany
Temperation of fluids Pillow plates are used everywhere where liquids must be temperated. In dependence of application the liquids can be cooled or heated. Cause of this wide range of applications pillow plates are used in the process industry, in the cooling industry and in a lot of other industries. Pillow plates are also know as heat exchanger plates, evaporator plates, cooling plates /sheets and thermo plates / sheets. Pillow plates as air-/water-heat exchanger Additionally to the temperation of liquids pillow plates are also used as air-/liquid heat exchangers. In case of polluted or wasted air and if there are high demands for cleaning, more and more pillow plates are used as air-/water-heat exchanger. The large exchange surface and the good possibilities for cleaning are important features for this type of heat exchanger.
Request for a quoteANTHERMO GMBH
Germany
Air heat exchangers as finned tube heat exchangers Heat transfer between a gaseous media and a liquid Finned tube heat exchangers are often called air/water heat exchangers or gas/water heat exchangers. Heat transfer between a gas (for ex. air) and a liquid (for ex. water) takes place in the air-/water heat exchangers. To improve the thermal output transfer from the gas to the liquid, fins made of well heat transferring materials are put on the tubes. Very often air-/water heat exchangers are used as exhaust heat exchanger to gain the energy out of warm or hot exhaust fumes. Finned tube heat exchangers can also be used as air heater, air cooler or condenser.
Request for a quoteANTHERMO GMBH
Germany
Heat recovery with the help of heat exchangers In industry, waste heat occurs at many points in the production process, which is often released into the environment without being used. In many cases, energy is even used to cool the waste heat flows from production so that they can be released into the environment. Heat exchangers (also called heat exchangers) are used for heat recovery so that the waste heat generated in the production process can be used again in the company. Gaseous or liquid media Waste heat can be in the form of gaseous media (e.g. warm exhaust air, steam, exhaust gases, etc.) or in the form of liquid media (e.g. hot water or other liquids). With the help of heat exchangers, the waste heat can be recovered from both gaseous and liquid media and then made available to the production process at a suitable point as energy in gaseous or liquid media. This process is known as energy recovery or also as heat recovery.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® Explosionproof flange heaters are used for heating of various gases and liquids in hazardous areas. The devices are manufactured in various designs. As heating elements cartridge type or tubular heating elements are used depending on applications. Further information about our CSN® ExFlange heaters
Request for a quoteResults for
Heating - Import exportNumber of results
189 ProductsCompany type
Category