Results for
FRIEDR. FREEK GMBH
Germany
Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A soft version of the BASE-flex, the NICKEL-flex (2.4068) is available as special execution. Due to the soft, easy to form nickel material, the NICKEL-flex is suitable for manual mounting with hand tools in round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel.
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For short, straight and figure cuts, small radii • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Smooth inside jaws for bending fine loops • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Smooth inside jaws for extremely precise work • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
— For Pozidriv cross-recess screws — Ergonomic multi-component hole handle with integrated soft zones and distinctive fast-turning zone enables optimum, hand-friendly power transmission and fast, low-fatigue working — The handle core made of impact-resistant hard plastic is coated with various soft components and embedded highly flexible pads that adapt optimally to the hand and ensure maximum power transmission. — The flexibility of the material and the pleasant feel of the fast-turning zone additionally increase sensitivity and support the precise application of force. — Bit holder for driving with e.g. a ratchet or cordless screwdriver — Insulation according to DIN EN/IEC 60900 — SlimLine with reduced blade diameter and integrated protective insulation, for low-lying screw and spring elements
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work • For gripping small parts and forming wires • Tips bent 45°, smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles with ergonomically shaped ESD multi-component sleeves, electrically conductive • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For Phillips cross-head screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • The handle core made of impact-resistant hard plastic is sheathed with various soft components and embedded highly flexible cushions which optimally adapt to the hand and ensure maximum force transmission • The flexibility of the material and the pleasant feeling of the high-speed turning zone additionally increases the sensitivity and supports the precise application of force • Practical hole booklet for hanging up the tools or for inserting a lever • Bit holder for the drive by, e.g. a ratchet or a cordless screwdriver • Bit storage in the cross hole possible • Insulation according to DIN EN/IEC 60900 • Blades made of chrome molybdenum vanadium steel • Blades hardened and black with injected insulation
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For gripping small parts and forming wires • Tips bent 45°, smooth inside jaws, edges rounded • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover • Insulation according to DIN EN/IEC 60900 • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Containing quality tools, insulated and tested according to DIN EN/IEC 60900 • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Sortimo I-BOXX, plastic system case made of shock and impact proof ABS-plastic with lockable transparent cover
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• In practical tool holder for easy removal and storage of the key • For Torx screws • Nickel-plated • Made of vanadium-molybdenum steel
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Containing quality tools, partially insulated and tested according to DIN EN/IEC 60900 • Tool bag made of durable cowhide with circumferential aluminium edge protection
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Strong design • With long flat jaws • Serrated inside jaws • With lap-joint and strong handles • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• American pattern • For holding, gripping, bending and cutting work • For cutting hard and soft wires • For shortening screws M 3.5 • Cutting edges inductively hardened • With Nail- & wire holder • Gripping zones for flat and round materials • Asymmetric inside jaws for better grip on the workpiece • Integrated ring spanner • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For fitting snap rings and retainer rings without finger holes for shaft retainers of any description • With opening spring • Made of tool steel, forged, oil-hardened
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• With protection cap • Blade with narrow, straight blade for fine cable work • With fixed blade • Ergonomically designed multi-component safety handle made of tough elastic, impact-resistant plastic with integrated soft zone • Insulation according to DIN EN/IEC 60900 • Blade made of stainless steel, hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For gripping and bending • With long round jaws • Serrated inside jaws • Handles with 1000V multi-layered insulation according to DIN EN/IEC 60900 • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Containing quality tools • The ergonomic multi-component design with integrated soft zone and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • Insulation according to DIN EN/IEC 60900 • In practical sales packaging • Blades hardened and black with injected insulation • Blades made of molybdenum vanadium steel / chrome vanadium steel
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For cutting hard and soft wires • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For fitting internal circlips in holes • With 45° angled jaws • Anti-slip, twisted precision tips • Handles coated with plastic • Made of chrome vanadium steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For almost all common closures • Key profile for these applications: heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. doors & windows in new buildings, locking systems, technical installations, for venting heating systems and many more • Universal key for almost all common switch cabinets & closures • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For cutting hard and soft wires • Cutting edges inductively hardened • Serrated inside jaws • Ergonomic angled head • Integrated ring spanner • With opening spring and catch • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • The ergonomic design of the pliers reduces work fatigue and also protects tendons and joints of the user • Made of tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• Specifically geared towards the requirements in the building and manufacturing industry • Cutting edges inductively hardened • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Asymmetrical cutting edge for easily cutting long workpieces, too • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional end cutting pliers • Handles coated with plastic • Made of special tool steel, forged, oil-hardened
Request for a quoteNWS GERMANY PRODUKTION W. NÖTHEN E.K.
Germany
• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened
Request for a quoteResults for
Hand tools - Import exportNumber of results
121 ProductsCompany type