Flooring - Import export

Round floor socket 7003A made of saltwater-resistant aluminum, with 2 slots and a lockable lid. The lid can be removed completely. Single box to be set at floor level, heavy design, accessible by car. Splash proof when closed, protection class IP 65. Standard surface in natural aluminum anodized. Other colors and equipment options on request.

The surface of the perforated metal plank, type BN-GA is a mix of closed punched nobs facing upwards and conical drain holes facing downwards. This means that the grating does not have any sharp edges on top and can be walked on easily even without footwear. At the same time, however, any liquids can be quickly drained through the conical drain holes so that no hydroplaning can occur.

The perforated metal plank type BN-OP5 “Noppe, offen plus, 5mm“ was especially developed for pedestrian areas with „High Heel Proof“ requirements. The bothsided punched holes have a diameter of 5mm. The punching sequence corresponds to BN-OP7. This type of planking offers high slip resistance and also allows ladies in stiletto heels to walk safely on the gratings. Due to the small hole configuration it is difficult to see through from underneath, which is important in public access areas. The perforated metal plank type BN-OP8, corresponds to type BN-OP5 in terms of the punching pattern, but have twice the number of holes. The drain holes have a diameter of 8 mm and thereby increase the drainage performance and light and air permeability..

Perforated metal planks, type BP-oN is very interesting for shelving areas, due to the smooth surface without holes or nobs. The type BP-oN is especially interesting for cantilever rackings based on its wide free span.

The perforated metal plank type BR is particularly suitable for areas of heavy loads on small contact areas due to its rhomb profile with extra high punching (punched holes 2.5 mm). Here, for example, vehicle navigability on ramps or parking areas are to be considered.

Perforated metal planks, type BP “parallel”, are characterised by their smooth line profiling and high loading capacity. For this reason this type is frequently used when large areas have to be covered in industrial areas and where stringent demands are made on load bearing capacity. This type can also be supplied without holes and is therefore ideal for use in the shelving construction sector.

Perforated metal planks, type BP-UE are characterized by the highest slip resistance class, their smooth line profiling and high loading capacity. For this reason this type is frequently used in slippery areas and where stringent demands are made on load bearing capacity.

Height-adjustable floor tank 8908B with 8 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Floor box 8810B made of polished stainless steel for 10 units. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

Floor box 8808T with 8 slots made of polished stainless steel. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The lid is designed for the inlay of carpets, cork floors or the like, with a covering thickness of 5–7 mm, and closes even when the plugs are inserted. Further equipment variants on request.

The housing of the 2003Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing of the 2003A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 3 installation devices. The sockets have a VDE mark. Further equipment variants on request.

Floor socket 7604A for outdoor use with 4 separate sockets, which are closed with a screw cap. The floor socket housing is made of solid, gray PVC. The rectangular frame is made of solid aluminum anodized with a stainless steel look. When closed, the 7604A floor socket is waterproof. The lid can be completely removed and can be locked with a special key. Further equipment variants on request.

Floor socket 9902D made of solid aluminum with 2 slots. The cover is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. By turning the cover by 180°, this version is also suitable for cleaning with wet sweepers. Further equipment variants on request.

Floor socket 8900B, compact and height-adjustable with one slot. The housing is made of sendzimir galvanized sheet steel. The frame and the lid are made of stainless steel. Floor coverings, stone slabs, paving stones, decking, etc. with a thickness of 15 mm can be used in the lid. With integrated magnet for easy opening of the socket. Further equipment variants on request.

Floor socket 8802B made of aluminum with lid for laying on. The rimless lid can be covered with floor coverings and closes in straight or angled form even when standard plugs are inserted. Further equipment variants on request.

Floor socket 8802A made of solid aluminum with lid to hang on. The lid is anodized in natural aluminum and closes in a straight or angled shape even when the standard plugs are inserted. Other colors and equipment options on request.

Height-adjustable floor tank 8920B with 20 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor tank 8912B with 12 slots. The housing is made of sendzimir galvanized sheet steel, the frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8904B with 4 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Height-adjustable floor box 8902B with 2 slots. The housing, frame and lid are made of stainless steel. Floor coverings such as carpet, parquet, laminate etc. with a thickness of 15 mm can be used in the removable hinged lid. The lid, with two versions of cable outlets, closes even when the standard plugs are inserted in straight or angled form. Further equipment variants on request.

Floor box 8808E made of stainless steel. Inside there are two aluminum equipment supports for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The stainless steel lid, surface polished, closes even when the plugs are inserted. Further equipment variants on request.

Floor box 8808B made of stainless steel. Inside there are two aluminum equipment racks for 4 units each. It can be installed at any point in the floor, as pipes are used for the line feed. Because of its low height, this version is particularly suitable for floors in old buildings. The rimless lid also closes when the plugs are inserted and is designed for sticking on floor coverings. Further equipment variants on request.

Floor box 8808A with a square housing made of stainless steel and anodised natural aluminum lid. Inside there are two aluminum device carriers for 4 units each, alternatively other combinations are also possible. It can be installed at any point in the floor, as pipes are used to feed the cables. Lid also closes when the plugs are inserted. Due to the low installation height, this version is particularly suitable for floors in old buildings. Further equipment variants on request.

The housing of the 2008Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request.

The housing of the 2008A floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 8 installation devices. The sockets have a VDE mark. Further equipment variants on request.

The housing of the 2004Q floor box is made of 1.5 mm thick V2A stainless steel and has a lockable aluminum lid. The sturdy floor box is passable by car. With a lid seal it is suitable for cleaning with wet sweepers. Correct installation is a prerequisite. The device unit can contain up to 4 installation devices. The sockets have a VDE mark. With internal tube for using the tank with the lid closed. Further equipment variants on request.

The complete floor box 2004B is made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be fitted with various floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 4 installation devices. The sockets are VDE certified. Further equipment variants on request.