Fixed it - Import export

The SMART SYSTEM linear actuators feature a self-sustaining anodized aluminum frame and steel re-enforced driving belt. This is a series of highly cost effective linear units, featuring high performance combined with a carefully planned simple construction. High load capacity,High speeds and accelerations, High admissible tipping moments, Low friction ,Low noise The SMART SYSTEM series consists of 3 distinct products with different features: E-SMART, R-SMART, S-SMART. SMART SYSTEM – E-SMART .

The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.

POOL DEHUMIDIFIER DS 60Effective humidity regulation in indoor swimming pools or whirlpools This quality device dimensioned for pool sizes of up to 50 square metres not only keeps the humidity in larger indoor swimming pools at an ideal level, so as to prevent moisture-related damages to the building and inventory and to ensure the well-being of visitors. With the DS 60 being manufactured in Germany and developed specifically for efficient dehumidification operations in wet rooms, it can also be used perfectly in whirlpool or wellness surroundings or gyms. The outward flagship of the DS 60 is its fibreglass-reinforced, easy-to-clean plastic housing which cannot be harmed even by especially reactive air environments.

Metric: Screws from M2 x 10 – M30 x 1000 with thread (up to 100 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. Plates: From ST 2.9 x 19 – ST 6.3 x 160 / 80 mm with thread (up to 80 mm long). Compliant with DIN, EN, ISO, or according to drawings and samples. KTG screws for plastics: 30-degree thread (OEB Kunst). KTG 3 x 10 mm – KTG 8 x 160 mm with thread (up to 60 mm long). DIN 7500 thread grooving screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Furch). DIN 7513 – DIN 7516 thread cutting screws: For die casting, zinc or aluminium. M3 x 20 – M10 x 160 mm with thread (up to 50-60 mm long) (OEB Schneid). Other thread types: With-Worth, HiLo, UNC/UNF, double-start, triple-start.

The perfect format for maximum dry keepingThe industrial condenser dryer DH 310 which can also be supplied in a stainless steel housing is characterized by a high dehumidification capacity, reliable continuous operation properties and practice-oriented equipment options alike. Designed for the operation whilst positioned on the floor, the device – given on-site preparation – can also easily be used when mounted to the wall or ceiling. Also it can be connected to existing ducted air systems. The dehumidifier DH 310 comes with a smoothly running scroll compressor for constant, pulsation-free pressure to ensure an energy-efficient refrigeration. Combined with its self-regulating EC radial fan this robust industrial dryer allows for a constantly high dehumidification performance during continuous operation even at low temperatures.

XXL dry keepingThe industrial condenser dryer DH 160 which can also be supplied in a stainless steel housing is characterized by a high dehumidification capacity, reliable continuous operation properties and practice-oriented equipment options alike. Designed for the operation whilst positioned on the floor, the device – given on-site preparation – can also easily be used when mounted to the wall or ceiling. Also it can be connected to existing ducted air systems. The dehumidifier DH 160 comes with a smoothly running scroll compressor for constant, pulsation-free pressure to ensure an energy-efficient refrigeration. Combined with its self-regulating EC radial fan this robust industrial dryer allows for a constantly high dehumidification performance during continuous operation even at low temperatures.

secutex coated lifting straps gently adapt to the „sharp edges“ of the load. The extreme structural resistance of the secutex material safely prevents any cutting of the load lifting accessory. For very „sharp edges“ the coated lifting strap is preferable since it reliably prevents movement over the edge. We offer two different types of fixed coating. The secutex fixed coating protects the single sided secutex coating against cuts to the loadbearing textile.The reverse side is protected against abrasion and dirt by the Powerflex thin coating. The lifting straps with secutex fixed coatings are very flexible and easytouse. The twosided fixed coating provides allround protection to the lifting strap, offering double security. This means that both sides can be used as contact sides. Dangerous mixups are now a thing of the past.

Design & construction Our Schulz separate fixing clip assits installation and compensates for irregular bore diameter. Installation Our Schulz clamp spring washers/fixing clips for euro ball transfer units allow ball transfers units to be mounted and removed from the installation (upper) side. Our clips requires a minimum plate thickness of 3 mm to grip securely.

made from zinc die cast and malleable cast iron

INDUSTRIAL CONDENSER DRYER DH 145 SHThe ultimate industrial condensation dryer DH 145 SH with an analogue hygrostat dehumidifies an enormous 475 liters per day With the DH 145 SH you have an industrial dehumidifier that is just as powerful as the DH 145 S from the same series. Whilst the technical data of both devices is identical, the distinguishing feature between DH 145 SH and DH 145 S is the analogue hygrostat, which permits a simple, straightforward start-up. Owing to its high dehumidification performance of up to 475 litres per day, this standard industrial dryer is a particularly economical solution for keeping stored goods dry and to prevent damages caused by mould as well as corrosion during industrial processes.

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Snap hook similar A-DIN 5290 with fix eye and safety screw

Snap hooks made from solid brass

Touwing hook with spring cap and fixed, round eye

Chain hook with fixed, round eye

Touwing hook with safety sheet and fixed round eye

Misc. snaps made from zinc die cast and malleable cast iron

Misc. snaps made from zinc die cast and malleable cast iron

Misc. snaps made from zinc die cast and malleable cast iron

Misc. snaps made from zinc die cast and malleable cast iron

made from zinc die cast and malleable cast iron

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting prices: • Natural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S ) • mixed-cell (semi-closed) EPDM (EPDM-SC) Technical properties Can withstand a wide range of requirements

Cellular rubber made by KOPP is the ideal material for sealing, insulating, insulating, dampening and as rattle protection. Cellular rubber is a porous, closed-cell rubber quality that is available in various strengths and densities. It is manufactured using the so-called expansion process - based on natural and/or synthetic rubbers, such as EPDM and other synthetic elastomers. Cellular rubber is airtight and waterproof and therefore (unlike foam rubber) does not require an outer skin to be used as a seal. From our KOEPPcell® range you can get the following cellular rubber or elastomer types in our usual high quality at extremely interesting pricesNatural rubber (NR-L, NR-S) • EPDM (EPDM-L*, EPDM-S*, EPDM- SUW*, EPDM-W*) * all also peroxidically cross-linked • Chloroprene rubber (CR-L, CR-S) • EPDM-PE blend • EPDM-CR blend (EPDM-CR-L, EPDM-CR-S )

As a market leader for circular building site saws and with more than 80 years of experience, we know what is important. With this knowledge, we work continually to keep products up to date, thereby offering the highest-quality, most durable and safest machines.Changes in the machinery directive For improved safety, we have developed a safety hood that has proven to significantly reduce occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version.

20 mm wide fabric lanyard with CARD FIX card holder. Length: 44 cm • Textile lanyard with secure closure which opens if pulled too strongly • With snap hook and CARD FIX card holder for cards with max. 1 mm thickness • Internal rubber pad on the card holder keeps ID cards, security passes and visitor passes safely in place • Band dimensions: 44 cm long, 2 cm wide

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

alternative (short) fixing-kit for Conti Polyflat and polyrope on request material socket housing: G20Mn5 material wedge: 226D

Fixing-kit with wedge for Conti Polyflat and Polyrope optional with pin galvanized surface With type testing similar to EN 13411-6 material socke housingt: G20Mn5 material wedge: 226D material pin: 8.8 Please find certificates and instructions in our download area: