Filters - Import export

ALWA MOULD P is a cold curing casting resin for the production of porous moulds, slabs and blocks for the ceramic industry. It is a porous and high-strength plastic, which is well-suited for high pressure casting applications. ALWA MOULD P can be used in various areas of the tableware and sanitary ceramics, technical ceramics, plastic mould procedure as well as various filtration processes. The high stability and defined porosity of the material allows highly accurate mould surface reproductions. With ALWA MOULD P various geometric moulds for filtration processes of suspensions can be produced. ALWA MOULD P can be used for ceramic slip pressure casting procedures. In this procedure, water is removed by a filtration process of a clay suspension (slip), so that an increasing clay layer is built on the mould wall over time. The moulds, slabs and blocks of ALWA MOULD P are easily machinable (e.g., drilling, milling).

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

Jerko high pressure Filter with 1/2" thread up to 16bar and 80l/min. Special design with round thread for the heavy duty environmental influences

Type: 6-60 GR-05 Manufacturer: Boll & Kirch Filterbau GmbH Description: Filter

Service pressure: 0-30 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, corrosion-resistant The filter is equivalent of heavy metal regulation Filter size in µ : 50 Inlet / outlet: acc. customer specifications High flow, noiseless Filter with 50µ has a free flow area = 75mm 2

Service pressure: 0-30 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, corrosion-resistant The filter is equivalent of heavy metal regulation Filter size in µ : 50 Inlet / outlet: acc. customer specifications High flow, noiseless Filter with 50µ has a free flow area = 28mm 2

Service pressure: 0-26 Mpar Service temperature: -40°C up to 85°C Reliable in filling and operation direction Small construction Corrosion-resistant All seals are suitable for CNG Certification: ECE R 110 The valve is equivalent of heavy metal regulation Burst pressure: > 70 Mpa, 20° Fitting for 8, 10, 12mm tube or ½" Filter: 0,3µm, absorption: >99,99% Massflow: 110kg/h, 26 Mpa, 15°C, CNG KV: 0,9 Tightness: 1x10-5mbar l/s, 20°C, 100% He

G2G3 welded metal multilayers expanded metal screen on both sides highquality metal fabric enables an efficient grease separation filter can be cleaned without any big effort

ISO groups / Filter classes ISO Coarse / G4 Structure/ Media jointly welded single bags dynamicallycomposed synthetic nonwoven (polyester) progressivelystructured filter media for optimum particle separation filter media is free of chemical binders simple installation detachable filter assembly enables separate recycling of header frame and media metal or plastic frame frame depth 20 or 25 mm

• for all common coffee machines or manual coffee filters - for 8 to 12 cups • easily removable using the attached handle

• The laminated glass is curved and designed for the aluminium window frame 250x150mm (BFKFE003G) • The glass is gold-coated and therefore provides effective protection against radiant heat • The laminated glass protects against splinters if the glass breaks • The glass is extremely heat resistant

• Inspection glass for flip-down goggles with dimensions 59x49mm • Fit into the window of flip-down goggles GFKBR003 / 005 / 007 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

• The laminated glass is curved and designed for the aluminium window frame 220x100mm (BFKFE001) • The glass is gold-coated and therefore provides effective protection against radiant heat • The laminated glass protects against splinters if the glass breaks • The glass is extremely heat resistant

• Round glasses with diameter of 50mm • Fit into the window of Bochumer Brille BFKBB003 and the welder´s leather hood GFKBR001 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

nickel plated brass

For the majority of the CSN® Filter and Damping Resistors the design is based on CSN® Resistor Webs. The resistor units provide operation at high continuous power, excellence voltage strength and low inductivity while needing only little space. CSN® Filter Resistors are used in HVDC applications as well as in reactive power compensation applications (like SVC, MSCDN, STATCOM) all over the world and have proven their reliability – even under harsh environmental conditions – for long time periods. CSN® Damping Resistors are most often used for buildingup RCcircuits in industrial plants as well as for damping of magnetic cores and reactors. The CSN® Filter and Damping Resistors are characterized by proven design for both, indoor and outdoor applications excellent high voltage strength high specific load due to very good convection conditions low inductance and capacity longterm stability low weight nearly unlimited adaptability to specified applications

• Lenses with dimensions 60x120mm • Fit into the window of Bochumer Brille BFKBB001 and BFKBB004, as well as the wire mesh visor with window BFKHI008-ALU • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

without shaft seal streamlined housing made of PP or ETFE volume flow of up to 220 l/min delivery head of up to 14m.WG back pull-out

• Inspection glass for flip-down goggles with dimensions 62x52mm • Fit into the window of flip-down goggles GFKBR002-1 / 004-1 / 006-1 • Available with various protective filters: • Inspection glass, blue, shade 4-7 • Welding glass, green, in shades 3 to 12 • Clear glass • Polycarbonate • All protective flters are also available as laminated glasses (SPFR) and gold-coated (GBD)

We produce basket filters and wire basket inserts of any kind according to customer specifications. Normally perforated plates with round or square perforation as well as wedge wire elements serve as base bodies. The filter baskets are lined inside or covered outside with plain or with pleated wire cloth, according to customer requirement.

Filter belts are used for a continuous filtration of polymer melt. These filter belts, but also wire mesh pre-cut parts, are manufactured in various dimensions and weaves. For high demands the fabrics are available with high tenacity warp wires. Plasma cut edges assure a continuous and frictionless passage of the filter belts Materials:Stainless steel, plain steel, combinations of various materials.

We produce filter elements in a virtually unlimited variety: plain or pleated, cylindrical or conical. They are used for the filtration of gaseous and liquid media.

KAMAT's own filter technology is innovative and fast-growing. Why are we involved in filter technology? The answer is simple: high pressure cleaning technology using water as an environmentally friendly medium requires a high quality filter and recycling solution. In some cases, traditional filter manufacturers are unable to meet these requirements, which is why KAMAT also offers its own customer-specific solutions in the field of filter technology. High-pressure water cleaning technology has many advantages: A water jet can be used gently on the surfaces to be cleaned, water is generally available as a medium and at the same time is environmentally friendly without extensive delivery costs. When it comes to accessories, high pressure cleaning systems have special requirements that are difficult to meet. For this reason, KAMAT has developed its own customised high-pressure filter solutions. KAMAT high pressure filters are available for operating pressures up to 4,000 bar.

Scope of application Magnetic filter rod (magnetic rod) is mainly used to remove ferromagnetic impurities in powder, granular and liquid or slurry. It is widely used in ceramics, power, mining, plastics, chemical industry, rubber, pharmaceuticals, food, environmental protection, pigments, dyes, electronics, metallurgy and other industries. Working Principle The magnetic rod is made of high quality stainless steel pipe and high B value rare earth alloy NdFeB, and is made by special manufacturing method. The magnetic filter can be assembled on a fixed frame to form a magnetic filter. When the material containing iron passes through, it is attracted by the magnetic rod, and the material containing iron is firmly adsorbed on the wall of the magnetic rod. To ensure the integrity of equipment and product safety. Product features energyfree, pollutionfree, can be installed in any position on the production line with material contact, saving space, easy installation.

installation of bagtype filters, panel filters, compact filters, filter pads, HEPA filters and activated carbon cartridges 30 mm air duct flanges connecting duct to upstream and downstream side tightly closing, lateral maintenance door with hinges and sash lock fasteners spacesaving simple toolfree filter change maintenance door optionally in right or left air direction

filter media of elastic, progressivelystructured nonwoven glass or synthetic fibres reinforcing grid on clean air side glassfibre media with adhesives, germicidal effect spare filter for existing rolltape filter systems

Vshaped arranged filter plates from closely pleated 4layer filter media composite nonwoven from electrically uncharged, organic, synthetic microfibres and activated carbon grains rugged KALTHOFF filter casing of plastic doubleworking arrester very high adsorption kinetics conditions for mounting and service optional at site

plane, compact design 4layer filter media coarse dust protective layer, 2 layers of activated carbon and abrasion protection layer at clean air side activated carbon layer of carbonimpregnated, reticulated PUR foam solid galvanised metal frame, with metal grids on both sides best combination of low pressure drop and adsorption capacities