Electronic components - Import export

• Containing pressing pliers and the most popular insulated end-sleeves • For establishing solderless, electrical connections according to DIN • Handle strip pushed in flush • Sortimo L-BOXX Mini, plastic system case made of shock and impact proof ABS-plastic for more mobility

• Contactless voltage tester with flashlight • For AC • With voltage field sensor for non-contact detection of alternating currents with visual indicator (red LED), voltage range 90 - 1000 V, e.g. in cable connections, wall sockets, junction boxes, circuit breakers & fuses and many more • Integrated flashlight for measuring point illumination • Pushbutton for switching on, with self-test and visual "ready" lamp (white LED) • Device complies with the EN61010-1 standard • Measurement category CAT III / 300V • Compatible with all pliers & cutters with SoftGripp handles • With eyelet for securing to e.g. lanyard • Housing made of made of plastic • Batteries included • Read operating instructions before commissioning

These are the E-cigarette shell which is machining by aluminum,then after special knurled,brown plating ,its nice appearance makes it very popular.

These are the parts made by brass, then after colorful plating, the products mainly used in electronic product field.

This thermocouple extension can be used for any thermocouple with type “K” mini plugs. Selecting these high-grade components achieves long service lives.

This thermocouple extension can be used with any Type K thermocouple. The selection of high-quality components ensures a long service life.

Display unit Samsung Galaxy S22 Ultra (S908B), phantom black, Service Pack GH82-27488A GH82-27489A GH82-27488A

Novelis Fusion™ 6HF – s200RW is a heat treatable product for applications with extremely demanding formability requirements. Fusion™ 6HF – s200RW offers the ultimate additional solution for remote laser welding of aluminium 6xxx alloys without the need for any additional metal. Access to the weld area is enhanced, welding speed is increased and the stability of the process is improved in comparison with standard laser welding processes. This product is recommended for inner panels with high formability requirements such as door inners or other closure inner panels. With Fusion™ 6HF – s200RW “near-edge” welding, a reduction in the flange length to as little as 5mm becomes possible. All values are typical.

Novelis Fusion™ 6HF – s200 is a heat treatable product for applications with extremely demanding formability requirements. This product is recommended for inner applications such as decklid and door inners and other closure inner panels. This product has an excellent balance of properties for forming and strength. In addition, it offers a unique advantage in the hemming process enabling sharp feature lines and rope hem designs that permit the reduction in perceived gap between adjacent panels. All values are typical.

Novelis Fusion™ 6HF – e200 is a heat treatable product for applications with extremely demanding formability requirements. This product is recommended for outer applications such as body sides and decklid outers. This product has an excellent balance of properties for forming and strength. In addition, it offers a unique advantage in the hemming process enabling sharp feature lines and rope hem designs that permit the reduction in perceived gap between adjacent panels. All values are typical.

Novelis Advanz™ 7UHS – s701 is a product developed for structural applications requiring high inservice strength. The 7xxx alloy provides the highest T6 strength among current aluminum alloys and has significantly higher strength over incumbent 6xxx alloys. This in turn offers potential for lightweighting of structural parts over advanced high strength steel options without compromising performance requirements. The alloy-temper can be optimized to provide good balance between strength, crash performance and corrosion resistance. Advanz™ 7UHS – s701 is an excellent choice for strength-dominated structural components, such as A-pillar, B-pillar, door beams as well as various other structural reinforcements. This product exhibits excellent specific strength and specific energy absorption along with good hot formability making it an ideal material for lightweighting of structural reinforcements. All values listed are typical.

Novelis Advanz™ 6HS s650 is Novelis’ latest offering to the high strength 6xxx series and caters to structural applications requiring high in-service strength. A tailor-made alloy, specifically designed for high strength requirements without compromising its forming characteristics, Novelis Advanz™ s650 has a 15-20% T6 strength advantage over incumbent high strength 6xxx, coupled with excellent crash behavior and corrosion resistance. Predominantly an alloy of choice for structural parts with high demand on forming and high strength after paint bake, typical areas of application are A-pillar, B pillar, roof traverse, rocker, inner and floor panels, bumpers and battery cases along with various other structural reinforcements. This product exhibits excellent after paint bake response which in turn provides high in-service strength making it an ideal material for light weighting of structural components. All values listed are typical.

Novelis Advanz™ 6HS – s615 is a heat treatable product specifically designed and optimized for high strength requirements. This product offers an excellent balance of properties: superior formability in the as-supplied temper, high in service strength and excellent bending and crash behavior. Novelis Advanz™ 6HS – s615 has a wide array of applications for general structure and crash energy absorption such as engine supports, cross members, transmission tunnel and front and rear crash members. The product shows excellent formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging both skin and structure components. All values listed are typical.

Novelis Advanz™ 6HS – e600 is a heat treatable product specifically designed and optimized for high strength requirements. The product shows good formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging skin components. This product can be used for hoods, fenders and roofs. The product shows good formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging skin components. All values listed are typical.

Novelis Advanz™ 6HF – s200 is a heat treatable product specifically developed for internal automotive applications with demanding high formability requirements. This product offers an excellent balance of properties: superior formability in the as-supplied temper, good in service strength and good bending. Novelis Advanz™ 6HF – s200 is recommended for door and decklid inners and other closure inner panels. This product offers an excellent balance of properties: Superior formability in the as-supplied temper, good in service strength and good bending. All values are typical.

Novelis Advanz™ 6CM – s300 is a heat treatable product for automotive structural and crash component applications. This product offers an excellent balance of properties: superior formability in the as-supplied temper, high in service strength, excellent bending and crash behavior. Novelis Advanz™ 6CM – s300 has a wide array of applications for general structure and crash energy absorption such as engine supports, cross members, transmission tunnel and front and rear crash members. As the in-service strength of Advanz™ 6CM – s300 is significantly higher than normal 5xxx alloys, this provides significantly higher energy absorption during crush. All values listed are typical.

Novelis Advanz™ 6CM – s118 is a heat treatable product for automotive structural and inner applications. Advanz™ 6CM – s118 was primarily developed for hood inners, in order to meet the highest pedestrian safety requirements while also offering a 6xxx series uni-alloy solution. In the as-supplied temper, this product is soft and highly formable – ideally suited to form complex parts such as hood inners. Developed for inner closure panels with special requirements, Novelis Advanz™ 6CM – s118 has excellent forming characteristics as well as a superior bending performance. Advanz™ 6CM -s118 has moderate strength after paint baking and offers controlled energy absorption in a crash situation. All values are typical.

Novelis Advanz™ 6HF – e200 is a heat treatable product specifically developed for external automotive applications with demanding high formability requirements. This product offers an excellent balance of properties: superior formability in the as-supplied temper, good in service strength and good bending. Novelis Advanz™ 6HF – e200 is recommended for body sides and decklid outers. This product offers an excellent balance of properties: Superior formability in the as-supplied temper, good in service strength and good bending. All values are typical.

Novelis Advanz™ 6F – e170 is a heat treatable product developed for automotive skin sheet applications. This product is characterized by excellent formability and excellent hemming behavior. Novelis Advanz™ 6F – e170 is predominantly used for critical exterior closure panels, but may also be used for demanding inner applications. Typical areas of application are hood outers, door outers, fenders, deck lids and critical inners. This product offers best in class forming behavior during press forming and exhibits significantly improved hemming properties over standard outer sheet. All values listed are typical.

Novelis Advanz™ 6HS – s600 is a heat treatable product specifically designed and optimized for high strength requirements. The product shows good formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging for structural applications. The product shows good formability and bake hardening response. Due to its superior in-service strength, this alloy is ideal for down-gauging structure components. All values listed are typical.

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less compressible than a foamed seal. Our one-component, elastic solutions are also used for electrically conductive seals. We dose silicones, polyurethanes or MS polymers in liquid, unreacted form directly onto your component. True to contour on the smallest geometries, extremely adhesive and durable. Perfect sealing – sealing, gluing, casting directly on the component. Absolutely true to the contour and directly onto your component. We enable our customers to do this in series thanks to state-of-the-art dosing systems.

Construction dryer at its best!Designed as reference class of professional construction dryers the TTK 900 practically leaves nothing to be desired. Its tough design and robust components ensure a permanently maximum dehumidification performance and value retention. Owing to a perfect combination of an especially powerful and efficient rotation compressor, an utterly robust high-pressure radial fan as well as high-quality electronic and mechanical components, the TTK 900 can impress with an excellent dehumidification capacity, especially at low ambient temperatures. Powerful air-circulating radial fan with dry air outlet on both sides In order to quickly distribute the dry, dehumidified air in the entire room, the TTK 900 is fitted with a dry air outlet on both sides.

We plan, build and deliver turnkey test systems for electronic and mechanical components. For example, these are test benches for quality assurance, validation and production departments of companies in various industries. Our services include e.g.: - Development test benches - Life time test benches - End-of-line test benches (production) - Retrofit of existing systems (software / hardware) - Climate & temperature test systems - Leakage test benches - Software development LabVIEW, TestStand, Python, C/C++ (Embedded), Microsoft PowerBI, SQL - Electronics development - Mechanical 3D CAD design - Risk assessment and CE - Commissioning, service, maintenance at home and abroad

K25000-3G high-pressure triplex plunger pump for 24/7 operation, pipeline tensioning and leak testing of tanks and various pipelines. The K25000-3G is used internationally hundreds of times as a high-pressure pump in hydraulic face construction. With a power of 250 kW, a gearbox with forced lubrication and an optional oil cooler, the pump is perfectly suited to the demands of 24/7 mining operations. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod load - Dynamically balanced gearbox - Forced lubrication gearbox (> 160 kW with oil cooler) - Standard gear ratios i = 3.33 - 3.50 - 4.04 - 4.62 - 5.44 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request

The K18000-3G triplex plunger pump has forced lubrication, making it ideal for continuous operation. Its main application is industrial cleaning. For large ship areas it is advisable to combine the pump with the Magnet Crawler (Ship Hull Crawler) from the Gekko range. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature. - Minimum inlet pressures dependent on fluid being pumped - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Forced lubrication gearbox (> 130 kW with oil cooler) - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76 - 4,13 - 4,50 - 4,93 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request

Hotmelt Extruder OptiMel has developed an extruder system that is specially adapted to the conditions and parameters in electronics encapsulation. A special design uses the advantages of the extruder when melting the materials and implements the injection via an additional piston unit. This process avoids pressure peaks and combines the advantages of extruders with the requirements when processing sensitive electronic components. product [extrusion tools, extrusion tools, hotmelt application systems, extrusion tool, extrusion tool, plastic welding extruder, hotmelt adhesive, extruder systems, extruder system, extrusion machines, hotmelt, hotmelt adhesives, extruder construction, extruder pumps, extrusion machine]

Optimel is your reliable partner for solutions for encapsulating electrical and electronic assemblies. The innovative Low Pressure Moulding (LPM) technology offers optimal protection against external influences such as moisture, dust and vibrations, thus ensuring the longevity and reliability of your products. The Low Pressure Moulding process or hotmelt moulding process originated in the sealing of cable harnesses in the automotive industry - today it is used in many areas for the protection of electrical and electronic components. At 5-40 bar (in individual cases up to max. 60 bar), processing takes place at a much lower pressure than in the classic hotmelt injection moulding process. This makes it easy to directly encapsulate even sensitive components such as circuit boards, sensors, etc. The cycle times are limited to pure encapsulation

Our thermal management and insulation products are far from being just interim solutions. The Thermal Interface Materials (TIM) from Seifert electronic GmbH ensure optimal thermal connection between heat sinks and the components to be cooled. As electronic assemblies become increasingly compact, even a tiny gap between individual components can disrupt the necessary heat dissipation. Air pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.