Results for
FRIEDRICH SCHULTZE GMBH
Germany
InduStrip EZ2 radiant heaters are suitable for full or auxiliary heating of rooms with large volumes and high ceilings. These radiators are for commercial use like in department stores, warehouses or industrial buildings. The heating elements emit no light and thanks to the clear design, the EZ2 inconspicuously integrates into the electrical installation. Recommended mounting height up to 3.5m.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HWP2-series is dust- and water-jet tight complying with IP55 rating. HWP2 heaters are a stylish means of providing comfort heat in outdoor or indoor locations
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. With the built-in three step switch heating power can be adjusted according to actual requirements. This helps saving energy! Step I 1/3 of heating power Step II 2/3 of heating power Step III 3/3 of heating power
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Infrared Heaters - Highly efficient infrared-technology. Economical heating, exactly on point, with Schultze Infrared-heaters. Specially designed halogen heating elements emit short-wave infrared and provide instantly noticeable comfort heat, similar to the sun. Heating people directly without the need to build up and maintain a body of warm air is economical and flexible as well, especially for applications like outdoors, with high ceilings or huge spaces. The field of application includes for example work-shops, sport-facilities, pub gardens, patios, but also industrial or commercial appliances like drying paint or heating machinery. The HA-series are IP22 rated for indoor use and provide the most economic means of heating intermittently used buildings. The case includes M6 holes for optional suspension.
Request for a quoteKLÖPPER-THERM GMBH & CO. KG
Germany
Whether it’s for maintaining stable temperatures in storage tanks, compensating of heat loss in supply pipes, liquefying firm substances such as wax or vaporizing water or thermal oils, electrical heaters by Klöpper Therm are the answer. Our heaters provide optimised, energy efficient and reliable process control for all kinds of plants – chemical, petrochemical and pharmaceutical – as well as power plants and refineries. Based on the client’s specifications, we verify the technical feasibility for each application and transforms it into a concrete design.
Request for a quoteTROTEC GMBH
Germany
Here, an overview of some practical benefits of the TEH 30 T: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 30 T electric heater - Some technical details: Heat output in kW: 3,3 Heat output in kcal: 2837 Amount of air: 300 m³/h Temperature increase ΔT: 54 °C Power consumption: 13,4 A Power socket: 16 A / Schuko Supply voltage: 230 V / 50 Hz Thermostat: yes Mobility: Portable Sound level: 63 dB (A) Length x width x height: 325 x 260 x 332 mm Weight: 10,6 kg Hose connection: 155 mm
Request for a quoteTROTEC GMBH
Germany
Here, an overview of some practical benefits of the TEH 100: Extra thermally insulated hose connections with supporting ring for extra grip Extremely easy-maintenance construction Very low heating of outer sheath Tried and tested German industrial design - protected prototype Multistack capability Robust TEH 100 electric heater - Some technical details: Heat output in kW: 9 - 13.5 - 18 Heat output in kcal: max. 15.400 Amount of air: 1.785 m³/h Temperature increase ΔT: 38 °C Power consumption: 27,2 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 69 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg Hose connection: 300 mm
Request for a quoteTROTEC GMBH
Germany
An overview of some practical benefits of the TEH 70: Particularly durable steel sheet construction with resistant protective coating Flow-optimised chassis for a focussed current of non-turbulent warm air Practical stacking groove for stable, space-saving storage and transport Minimised outer sleeve heating with double-walled housing model Very easy to maintain design Robust Trotec ergonomic recessed handles with an inner Grip-Clip, for the best hold while carrying Tried and tested German industrial design protected prototype Stackable with equally dimensioned models Robust TEH 70 electric heater - Some technical details: Heat output in kW: 6 - 9 - 12 Heat output in kcal: max. 10.300 Amount of air: 1258 m³/h Temperature increase ΔT: 35 °C Power consumption: 18 A Power socket: 32 A / CEE plug Supply voltage: 400 V / 50 Hz Thermostat: Accessory Mobility: Wheels Sound level: 66 dB (A) Length x width x height: 400 x 400 x 480 mm Weight: 29,5 kg
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 120The thermal power plant among the TDS electric heater fans With a hefty 30 kW of heating power the TDS 120 is the undisputed No. 1 among the popular TDS electric heater fans from Trotec and offers you convenient spare capacity for the permanent heating of larger rooms or for temperature control in large-volume building sections. Owing to the integrated thermostat control, the generated warm air current can be infinitely adjusted to the desired temperature and regulated in line with demand via a two-stage power control for space-filling temperature control. And since our distinctive logo has been printed on the outside, we have also incorporated distinct extras inside, which make all the difference to conventional standard electric heater fans.
Request for a quoteTROTEC GMBH
Germany
TDS 100 Electric Fan Heater The TDS 100 electric heater provides a heating performance between 11 kW and 22 kW in 3 stages (stage 1 only fan). Furthermore the TDS 100 has an integrated thermostat for continously adjusting of the desired temperature. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 100 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory Fan function Place-saving stackable Fields of application: Building container Garages Gastronomy Greenhouses Marketplaces Storerooms and workshops Boathouses Workshops Shipbuilding and counting...
Request for a quoteTROTEC GMBH
Germany
TDS 50 Electric Fan Heater The TDS 50 electric heater provides a heating performance between 4.5 kW and 9 kW in 3 stages (stage 1 only fan). Furthermore the TDS 50 has an integrated thermostat for continously adjusting the desired temperature. In comparison to direct fired gas or oil heaters, the electric fan heaters of the TDS series dont consume oxygen or produce combustion gases. Because of that this devices can be used everywhere, in particular for temperature control of unheated interiors. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 50 is suitable for uses in enclosed rooms Wall and ceiling bracket available - mounting is available as an accessory
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 10Small firebrand with impressive inner values There are many electric heater fans – but only one original Trotec TDS series. Distinctively recognizable by the logo printed on the side, even the smallest electric heater fan of our TDS series presents itself to you in markedly good shape. And not only on the surface. A second glance may well be worthwhile, in every respect, little by little, can add up to a great difference! Only the TDS electric heater fans from Trotec are equipped with two convenient attachment screws mounted to the sides in order to accommodate the optionally available wall and ceiling holders. With the electric heater fan TDS 10, the desired temperature can easily be adjusted via an infinitely variable thermostat, which automatically switches the heating elements on as needed in addition to the permanent fan to save energy.
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 755-10-15 – solid three stage heating power up to 15 kW A true power pack, the electric heater fan TDS 75 cuts a remarkably fine figure even with large-volume heating tasks. And not by chance, but exclusively made by Trotec. And since our distinctive logo has been printed on the outside, we have also incorporated convincing extras inside, which make all the difference to conventional standard electric heater fans. In addition to common equipment features such as a fan motor provided with thermal protection or a reliable overheating protection, the electric heater fan TDS 75 comes equipped with further practice-oriented features, e.g. an integrated air baffle, which optimally leads the warm air flow outside and initiates maximum efficiency, or trapezoidally mounted carrying handles, on which the electric heater fan can be stably stacked a number of times.
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 19 EFiery red mobile heater as a convenient all-round solution The red electric heater fan does not only have a fiery look, but also presents the ideal heating solution for construction trailers, indoor market stalls or smaller workshops. For the TDS 19 E can be employed at basically all locations where the use of oil and gas heating devices is undesirable or even prohibited, such as in unheated rooms. Thanks to the integrated power cable, all it takes to operate the mobile heater is a socket. The warm air flow generated by the TDS 19 E can be infinitely adjusted to the exact desired temperature, and its heat output can be regulated as needed using the two-stage power control. Beyond that, fan operation without heating function is also possible.
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 50 EPowerful mobile heating in a trice The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home. With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle. Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.
Request for a quoteTROTEC GMBH
Germany
ELECTRICAL SPACE HEATER TDS 75 RProfessional heating for a wide range of applications: With the electric heating gun TDS 75 R Not only because of the round warm air outlet on-site direct heating applications run smoothly with the electrical space heater TDS 75 R. The combination of sound, straightforward heating engineering by means of corrosion-protected stainless steel heating elements for reliable, fault-free continuous heating operation as well as easy handling via infinitely variable thermostat and triply switchable heating capacity control offers you the most diverse applications. a budget-friendly heating solution without corners and edges – housed in a fully galvanized, painted steel housing with ergonomic handle.
Request for a quoteTROTEC GMBH
Germany
CERAMIC FAN HEATER TDS 10 MQuick, effective and draught-free warmth without burning dust The small ceramic fan heater is not only the ideal heating solution for allergy-sufferers to be used in living and work spaces. For, generally speaking, electric heaters are excellently suited for use in closed interior spaces, as they neither consume oxygen nor produce any combustion gases. The ceramic fan heater TDS 10 M still outweighs this commonly known advantage of electric heaters, for it is equipped with a PTC ceramic heating element instead of heating wires. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TROTEC GMBH
Germany
ELECTRICAL SPACE HEATER TDS 120 RProfessional heating for large building areas: With the TDS 120 R and a full 30 kW heating force Owing to 30 kW of heating power, the most powerful model of the TDS-R series comes with convenient spare capacity for the permanent heating of larger rooms and is hence especially suited for temperature control in larger building sections. Accommodated in a comfortably transportable and stable carriage construction with ball-bearing wheels, the fully galvanized, coated steel sheet housing of the electrical space heater TDS 120 R houses high-quality corrosion-protected stainless steel heating elements, which immediately after switching on generate formidable heat flowing out in large volumes via the powerful air circulating follow-up fan. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat and the heating capacity can be increased in two stages up to 30 kW for maximum selected warmth.
Request for a quoteTROTEC GMBH
Germany
Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 50 M. For more targeted warmth, the heating capacity can be increased in two stages up to 9 kW. If required, the fan can also be used in sole fan operation without heating function. The TDS 50 M is powered by three-phase current, which is, however, not supplied to a conventional heating coil but to a durable PTC ceramic heating element integrated in this electric heater. In direct comparison, this does not only entail a more homogenous hot air current and a lower noise generation – the ceramic PTC heater battery also offers many additional assets.
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 29 EWarm. Warmer. Hot! Ideal mobile heating solution. The mobile heater TDS 29 E is an ideal heating solution that can be applied basically everywhere. Equipped with a hard-wearing housing and a convenient carrying handle, the robust device impresses when heating construction trailers, workshops, warehouses, halls and boathouses. Via the integrated thermostat control, the warm air flow of the TDS 29 E can be infinitely and precisely adjusted to the desired temperature. The two-stage power control for needs-based adjustment of the heat output allows for perfect temperature control of every room. Beyond that, fan operation without heating function is also possible. Like all devices of that series, the TDS 29 E produces non-condensing heat without consuming oxygen or producing combustion gases – this makes it particularly suitable for indoor use. For here, the use of oil and gas heating devices is often undesirable or even prohibited.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Explosion-proof heaters - ATEX – Standard. Explosion-proof heaters are used in many industrial or commercial applications that are classified as hazardous areas. Our appliances are used to heat the ambient air of hazardous areas in zone 1 and 2, typically in chemical industries, paint and lacquer industries, sewage plants and mining. Heaters made of high-grade stainless steel are recommended for aggressive environments (e.g. sewage plants), while heaters with a painted or coated surface, also available with protection basket, are sufficient for standard applications. Available on request: further types of explosion-proof heaters and our technical data sheets, as well as the TR-CU certificate.
Request for a quoteFRIEDRICH SCHULTZE GMBH
Germany
Schultze RiRo heaters are your solution for industrial and commercial heating appliances: dust- and watertight, corrosion-resistant, flexible and uncomplicated to install. Suitable for damp locations and rough industry environment, for reliable and efficient heating – often unnoticed, but indispensable. Universal features: for power types 1000 W to 3000 W the connection can be fitted with either 230 V or 400 V 3(N) ~. On request: for special applications all types are available in special voltages or different high-grade steel qualities, e.g. for food- or off-shore-industry.
Request for a quoteTROTEC GMBH
Germany
Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 300: Heating performance: 80 kW Air flow rate: 6000 m³/h Mains voltage: 400 V Power: 123 A Power socket: CEE 125 A plug Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 76 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1.625 mm Width: 800 mm Height: 1.245 mm Weight: 245 kg Some of the TEH 300s abundant qualities: Extremely robust top-quality product "made in Germany" Stackable
Request for a quoteTROTEC GMBH
Germany
The possibility for wall mounting or installation under the ceiling open wide range of application possibilities, e.g. for heating of building container, marketplaces, greenhouses, small storages, garages, workshops, boathouses or at installation applications. Benefits in pratice: 100% TROTEC - development, design, production Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection 10% more power than competitive models Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 is suitable for uses in enclosed rooms Standard built-in air baffle for optimization of heat dissipation (guarantees maximum efficiency) Fan function
Request for a quoteTROTEC GMBH
Germany
Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Request for a quoteTROTEC GMBH
Germany
Due to its high air flow rate and advanced PTC heater battery technology, the high-performance rapid heater TDS 30 M is ideally suited for quickly heating large, cold rooms. Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 30 M. For more targeted warmth, the heating capacity can be increased in two stages up to 5 kW. If required, the fan can also be used in sole fan operation without heating function.
Request for a quoteTROTEC GMBH
Germany
Wherever condensation free warmth is needed without long air transportation ways, on site and immidately effective, the favourable electric heating units of the TDS R series are best choice. Because in comparision to direct fired gas or oil heaters dont consume oxygen and produce no combustion gases, they are well suited for temperature management of unheated inside rooms, workshops or garages. Thanks to the integrated thermostat control the produced warm air flow can be adjusted continuously to the desired temperature. If needed, the heating elements of the TDS 30 R switch on thermostatic controlled additional to the constant fan. Benefits in practise: Multistage temperature control with up to 3 heating stages Integrated room thermostat for constant, cosy warmth Overheat protection Fan motor with thermal protection Condensation-free heating - no oxygen consumption - because of that the TDS 30 R is suitable for uses in enclosed rooms Easy transportable and easy to use
Request for a quoteTROTEC GMBH
Germany
ELECTRIC HEATER FAN TDS 20Black, white, hot! Ideal for many stationary heating tasks. This electric heater fan cuts a remarkably fine figure in the most varied of heating applications. And not by chance, but exclusively made by Trotec. In developing the TDS series, we paid particular attention to many practical details which make the great difference in contrast to conventional standard electric heater fans. In addition to common equipment features such as overheating protection or a fan motor provided with thermal protection, the electric heater fan TDS 20 comes with an extra air baffle which optimally leads the warm air flow outside and initiates maximum efficiency. Thanks to the integrated thermostat control, the produced warm air flow can be continuously adjusted exactly to the desired temperature.
Request for a quoteResults for
Electric heater - Import exportNumber of results
34 ProductsCompany type
Category