Results for
IGUS® GMBH
Germany
Initiator cables, also referred to as sensor/actuator cables, connect control units and different sensors, or, in the case of reversal of the measurement principle, actuators. Frequently used abbreviations include ini or ini cable (plural: inis). Sensor or measurement transducers transform physical quantities such as rotation, speed, distance or length into analogue electric impulses. In the case of an actuator, the measured electric current (symbol: I, unit: ampere; A) or voltage (symbol: U, unit: volt; V) is transformed into temperature, pressure or torque. The connection cable consists of at least three cores with a small cross-section of between 0.14mm² and 0.34mm². In the simplest case, two cores are required for supplying the voltage, while the last core transmits an I/O signal. For sensitive applications, there are shielded versions in addition to the traditional ini cables to avoid EMC disruptions (electromagnetic compatibility).
Request for a quoteIGUS® GMBH
Germany
The chainflex® bus cables are available for all well-known industrial bus systems such as Profibus, Interbus, Profinet, Ethernet, CAN-Bus, DeviceNet, ASi or CC link. Depending on the cable family, they can be used for torsion, for severe climatic conditions, for narrow radii, or particularly long travel distances, at high speeds and accelerations. Tested in the igus® laboratory with millions of cycles in e-chains®, they provide guaranteed safety against failure. -Bending radii up to 7,5xd -Jacket materials: PVC, iguPUR, PUR or TPE -For flexing applications -For medium duty applications -For extremely heavy duty applications -For twistable use -For heaviest duty applications in rail vehicles -For increased tensile load -Overall shield Flame retardant
Request for a quoteIGUS® GMBH
Germany
PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.
Request for a quoteIGUS® GMBH
Germany
Chainflex® CFKOAX coaxial cables are designed for very heavy duty applications and are almost unlimited resistance to oil, also with bio-oils. Because of its UV resistance, the cables can be used for indoor and outdoor applications. - Unsupported and gliding travel distances up to 400 m and more - Storage and retrieval units for high-bay warehouses, machining units/machine tools, quick handling, cleanroom, semiconductor insertion, indoor cranes, low-temperature applications - For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
Request for a quoteIGUS® GMBH
Germany
Strain relief from igus® is specifically developed for use in e-chains® and dynamic applications. Thecombination of polymer strain relief components and chainflex® cable materials offers maximum holding force and very high service life for the cables. For a wide variety of applications, igus® offers the best solution with respect to cost and benefits; from the CFXL strain relief for long travels in harsh environments, or the new CFU honeycomb strain relief for fast assembly to the CFN chainfix nuggets for simple and inexpensive strain relief. igus® chainfix strain relief components have been successfully used in thousands of applications around the world for years.
Request for a quoteIGUS® GMBH
Germany
chainflex® CF Air pneumatic hoses were tested in e-chains® for over several million bending cycles. Their outstanding features include flexibility, high abrasion resistance and very good resistance to oil and coolants. -For extremely heavy-duty applications -PU/PE hose -Oil- and coolant-resistant -Abrasion-resistant -Outside-toleranced -PVC and halogen-free
Request for a quoteIGUS® GMBH
Germany
chainflex® robot cables are used in energy chains or 3D applications. The twistable robot cables meet extremely high industrial stress requirements and score points with properties such as resistance to hydrolysis and microbes, UV resistance and many, many others. Different types of robot cable are available, e.g. hybrid cables, fibre optic cables (FOCs), motor cables and servo cables. Typical application areas: - For heavy duty applications - Almost unlimited resistance to oil - Indoor and outdoor applications with average solar radiation - Unsupported travel distances and up to 100 m for gliding applications - Machining centres / machine tools, storage and retrieval systems, packaging industry, handling, refrigerating
Request for a quoteIGUS® GMBH
Germany
chainflex® special cables are cables for special applications such as hanging applications, for use in rail vehicles or thermal and compensation cables. Use our comprehensive knowledge about cable plus the experience of 2 billion test cycles that are annually realized in the company-owned chainflex® laboratory. The steadily growing product range of the chainflex® special cables is based on the requirements of our customers. igus® also manufactures cables for special applications and uses a wide range of materials and manufacturing processes. Depending on the design, customer-specific special products can be made from lengths of 500 m. We look forward to hear about your job definition!
Request for a quoteIGUS® GMBH
Germany
-For medium duty use -Minor oil influence -More suitable for indoor applications, but also for outdoor use at temperatures > 5 °C -Unsupported travel distances and up to 20 m for gliding applications -Bus connection cable for machining units/machine tools, handling, indoor cranes
Request for a quoteIGUS® GMBH
Germany
- Requirements: For extremely heavy duty applications - Outer jacket: TPE - Hydrolysis and microbe-resistant - Silicone-free - UV-resistant - Oil resistance: Oil-resistant according to DIN EN 60811-404, resistant to organic oils according to VDMA 24568 with Plantocut 8 S-MB by DEA
Request for a quoteIGUS® GMBH
Germany
readycable® harnessed cables are ready-to-connect cables for use in energy chains®. As manufacturer and harnesser, igus® provides everything from a single source, thus reducing throughput times and the number of suppliers. The portfolio includes an extensive range of catalogue products, including cables harnessed according to manufacturers' standards and diverse industrial standards as well as individual singly or series produced components. Numerous types of cable of different qualities, with different approvals and with different certifications of conformity are available to choose from. All components are subjected to extensive quality checks and functional tests.
Request for a quoteN&H TECHNOLOGY GMBH
Germany
We realize magnetic connectors including cable assembly for all sectors and industries. On request, we also take over the construction and development. Depending on the material and internal structure of the spring contact probe, currents up to 15A per pin are possible. The magnetic force can be customized using different magnets. Protection classes up to IPx7 are possible for demanding installation situations. Please contact us if you are interested in a magnetic connection solution. For an initial evaluation of your request, a first sketch, the desired specifications, as well as the planned annual volume and duration is sufficie
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The thin wire facilitates very flexible installation. The fibreglass insulation facilitates routing the probe along very hot components (Tmax. 450 °C). The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +450 °C Wire type: Fibreglass/fibreglass, 0.2 mm, wire, Tmax: +450 °C
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The wire facilitates very flexible installation. The fibreglass insulation facilitates routing the probe along very hot components (Tmax. 450 °C). The thin probe tip guarantees very rapid response. Temperature range: -100 °C to +450 °C Wire type: Fibreglass/fibreglass, 0.5 mm, wire, Tmax: +450 °C
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The thin wire, barely 0.7 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: :-190 °C to +260 °C, short-duration to +300 °C Wire type: Teflon,0.08 mm, wire, Tmax: +300 °C
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
This inline thermocouple can be individually installed. For measurements in the wiring harness, on difficult to access points or on the smallest components. The thin wire, barely 2 mm in diameter, facilitates highly flexible installation. The thin probe tip guarantees very rapid response. Temperature range: -100 °C to + +200 °C, short-duration to + 230 °C Wire type: Teflon, 0.2 mm, wire, Tmax: +200 °C
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
N&H TECHNOLOGY GMBH
Germany
We assemble cables according to customer specifications for all kind of applications. In addition to common cable types, we also offer the production of customer-specific special cables, including the manufacture of customer-specific connectors. On the basis of your sample, your specification or technical drawing, we will create an individual offer and support you during the project. We advise you on the selection of suitable materials and offer cost reduction options. We offer you an active co-operation in the development and construction and give suggestions for improvement. For an offer we need: •technical drawing, sketch or pattern •technical specifications, equipment extras •required amount Please send following informations to: info@nh-technology.de One of our engineering experts will contact you asap
Request for a quotePCB PIEZOTRONICS GMBH
Germany
Robust industrial cable, 2-wire twisted with screen, black polyurethane sheath, cable diameter 6.3 mm, bending radius 63 mm, temperature range -50 to +121 °C, length 3 meter. Terminations a) Military connector type MIL-C-5015 moulded, 2-pin, b) open cable end
Request for a quoteIPF ELECTRONIC GMBH
Germany
ipf cable sockets are used primarily for establishing the electrical connection of sensors. Their features are characterized by rugged design, the highest protection classes (IP67 \ IP68 \ IP69K) and, if desired, with 360° shielding. With the features: bus-ready, suitable for use with drag chains and robots, resistance to oil and chemicals, resistance to welding sparks, their resistance to cleaning agents or high-pressure and steam-jet cleaning, the expanded temperature range of up to +230°C, the rapid interconnection technology and special data transmission properties, the cable sockets meet all requirements in automation technology.
Request for a quoteIPF ELECTRONIC GMBH
Germany
Connecting digital signals directly at the machine can contribute to significant cost and effort minimization. A classic application is the linking of different signals directly in the field. Thus, it is possible to avoid long line paths of many individual devices, which significantly reduces the wiring effort and the need for control inputs. All input signals on the logic modules are visualized by integrated LED and are electrically decoupled from each other. In this way, influences from one device to the other are reliably prevented. The outputs of the modules are overload-proof and the upcoming signal is also indicated by an LED. In addition to logical input signal connections such as AND and OR, versions with signal change control are also available. The ipf logic modules are available for DIN rail mounting or as field modules.
Request for a quoteTKD KABEL GMBH
Germany
TKD | 01 Flexible Control & Power cables Flexible Power cables for the transmission of electric power as well as flexible control cables to measure, control and regulate or monitor industrial machines & plants. - PVC-power & control cables - Approved power & control cables - Halogen-free power & control cables - PUR-power & control cables, cables for hand-held machinery - Special single cores Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > HAR - EU harmonized Excerpt of products: ÖPVC - ÖPVC-CY - ÖPVC-SY - 2YSL(St)CY - 2XSL(St)CY - H05VV5-F - H05VVC4V5-K - MUlTINORM (HAR-UL-CSA) - 2-NORM (UL-CSA) - 2-NORM TRAY (UL/CSA) - FLAME (FRNC) - 2XSL(St)CHK - KAWEFLEX® Control PUR, YPUR - H05BQ-F - H07BQ-F - HIGHFLEX LiFY - ESUY
Request for a quoteTKD KABEL GMBH
Germany
TKD | 06 Crane, conveyor & lift cables Highly flexible crane, conveyor and lift cables for reeling, spreader, festoon and lift applications in the field of Crane & Hoist technology (e.g. Indoor / Outdoor / Harbour / Mobile cranes) as well as in the field of Elevator technology ( e.g. Passenger Lifts / Freight Lifts / Panoramic Lifts) - Power, Control & Data cables - for lift applications - for crane applications - for reeling - for usage in baskets - HV & MV Trailing applications 1-30 kV - for trolley systems - Battery charge Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: REELTEC®- FESTOONTEC® - SPREADERTEC® - LIFTTEC®
Request for a quoteTKD KABEL GMBH
Germany
TKD | 02 Electronic (LF), telecommunication & intrinsically safe systems cables Electronic cables, versatile for low-frequency data transmission systems in electronics and electrical engineering. Telephone cables for indoor and outdoor use in communications technology as well as for fire alarm systems. - PVC- & Halogen-free electronic cables - Electronic & control cables for intrinsically safe circuits - Approved electronic & data cables - Low-capacity data cables - Hook up & installation cables - Halogen-free installation cables - Instrumentation cables - Telecommunication cables Excerpt of versions: > double shielded, shielded, unshielded > stranded in layers, pairs, triples, quads > UV-resistant, Oil-resistant > UL/CSA recognized Excerpt of products: ELITRONIC® - PAARTRONIC® (PVC & FRNC) - DATATRONIC®-CY (UL/CSA) - DATEX-CY - DATEX-PIMF-CY - INDUCOM® RE-2X(St)Yv-fl - INDUCOM® RE-2X(St)Yv-fl PIMF
Request for a quoteTKD KABEL GMBH
Germany
TKD | 04 High flexible Control and data cables for use in drag chains & robotic applications Highly flexible power, control & data cables for high mechanical requirements in drag chains & robotic applications. Drag Chain & Robitc Cables ... - Control, Electronic & Data - for harsh operating conditions - for high temperature apps - for Cleanrooms - with antibacterial effect - 3D - suitable in case of torsional stress Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized Excerpt of products: KAWEFLEX® 6 Series - KAWEFLEX® Allround - KAWEFLEX® Cleanline - KAWEFLEX® Hygienic - KAWEFLEX® THERM +180 °C - KAWEFLEX® KINEMATICS 3D
Request for a quoteTKD KABEL GMBH
Germany
TKD | 03 BUS, LAN, FO-, coaxial & video cables in the field of production automation for reliable data and energy transmission (e.g. between sensors, actuators and controllers), for high flexible applications (e.g. power chains, gantry robots, pick&place units, conveyors, machine tools, automated production systems, etc.) - BUS | FIELDBUS technology – for industrial, process & building automation - LAN | ETHERNET-Technologie –for structured industry & building cabling - FO BUS-Technologie – optical data transmission - Coaxial & video cable Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized, listed > for fixed installation > for high flexible drag chain & robotic applications Excerpt of products: PROFIBUS - MULTIBUS - INTERBUS - CAN BUS - DeviceNet - FoundationFieldbus - ASi-BUS - SafetyBUS - EIB/KNX BUS - PROFINET - INDUSTRIAL ETHERNET Cat.5e...Cat.7A - POF - SIMPLEX, DUPLEX
Request for a quoteTKD KABEL GMBH
Germany
TKD | 07 Rubber Cables Flexible Power supply & Control Cable for applications with high mechanical requirements. ( e.g. automotive industries, shipbuilding, machine tool building mining and industries, in quarries and on construction lots.) - Light and middle rubber-sheathed flexible cables - Heavy rubber-sheathed flexible cables - Welding cables - Special rubber cores - for permanent use in water Excerpt of versions: > flat & round > shielded, unshielded > with and without supporting element > UV-resistant, Oil-resistant Excerpt of products: H05RR-F - H05RN-F - H07RN-F - H07RN-F PREMIUM - NSSHÖU H01N2-D - H01N2-E - NSGAFÖU - NSHXAFÖ
Request for a quoteTKD KABEL GMBH
Germany
TKD | 05 Servo-drives, measurement & system cables Flexible & high flexible Servo-drives, measurement & system cables for fixed istallation, flexible use and for use in drag chains & robotic applications. - Cables for servo-drives 0,6/1kV - Measurement & System cables (feedback, encoder, resolver, speedo sensor, signal) - for DriveCliq applicationss - for harsh operating conditions - 3D - suitable in case of torsional stress Excerpt of versions: > shielded, unshielded > UV-resistant, Oil-resistant > UL/CSA recognized > fixed installation, limited flexible, flexible & high flexible > compatible systems for example: B&R, Baumüller, Berger Lahr, Control Techniques, ELAU, Fagor, FANUC, Heidenhain, Jetter, Lenze, LTi DRiVES, NUM, Omron, Rexroth, SEW, Siemens, Sick, Stöber, a.o. Excerpt of products: KAWEFLEX® Servo - KAWEFLEX® 5... Series - KAWEFLEX® Allround - KAWEFLEX® KINEMATICS 3D
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Optimum crushing instead of cable salad The very best method for crushing of cables or electrical scrap has brought many a tool to its limits and yet this is a frequently underestimated source of money. In addition to expensive copper, the recycling process also recovers aluminium and noble metals. In order to reach these valuable raw materials, robust preliminary crushing units are used, followed by a second crushing cycle. The demands on the crushing knives cannot be ignored and they must therefore be very tough. We are at the side of our partners to give advice on the selection of ideal materials and the best heat treatment.
Request for a quoteResults for
Electric cable - Import exportNumber of results
40 Products