Drums - Import export

The HTSD-High Temperature Drum Heater is our high temperature drum heater (220 °C) and exclusively suitable for steel drums. The heating jacket is used in areas where large surfaces need heating over 90 °C. This barrel heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISD heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. The heating element of the HTSD heating jackets is sewn into a fleece made of silicone-insulated fibreglass material. The insulating outer housing consists of a binder-free mat made of textile glass. The heating element is therefore double insulated (protection class II). An optimal contact with the barrel, as well as a quick assembly and dismantling are achieved by the use of quick release buckles.

We offer an extensive range of drum and barrel heaters and container heaters: Heating jackets, silicone drum heaters, base drum heaters and insulating but unheated drum jackets and lids for heating and insulating plastic and metal drums respectively containers. According to the destined application we use polyester, silicone, teflon and glass fibre for our drum heaters and container heaters. Some of the materials are coated and multi-layered resp. combined. Our drum heaters can be used individually and in combination and can be ordered and delivered online (shop.freek.de) for all standard drum sizes (25 / 50 / 105 / 200 litres). Of course, we also manufacture our heating jackets, heating sleeves, base heaters and insulating bonnets individually to fit your container and your special application. HC - Heating cabinets If you heat several drums or containers together or need a container heater for the ATEX area, the heating cabinets from our partner Amarc are the right choice.

The HISDpro - Side Drum Heater is a simple yet effective silicone insulated drum heater for the heating of barrels up to 90°C. The Silicone heating jacket is available in four standard sizes (25 / 50 / 105 / 200 liters) and can be manufactured to customer specifications as well. HISDpro heater jackets are particularly suited to melt soaps, fats, varnishes and oil-based products, or respectively reduce their viscosity. The 200-liter element can be combined with the HBD - base drum heater to reduce the heat-up time. These heater jackets are not only used on drums but also containers and any kind of glass-fibre reinforced plastics. They can be produced with any number of belts, e.g. to enable them to be clamped on to rotor blades.

The HSSD - Side Drum Heater is an easy and actual aid to the warming of steel barrels. It has got a higher efficiency than the Insulated Jacket HISD, but no thermal insulating function. For a very quick heating and higher temperatures up to three drum heaters can be used simultaneously for a 200-liter barrel. The Side Drum Heater is available in four standard sizes (25 / 50 / 105 / 200 liters) and can of course be made to measure, too. HSSD - Side Drum Heaters are suitable in particular to defrost frozen or other products, thus allowing to empty the barrels rapidly. Soaps, fats, varnishes and oily products can be melted as well, respectively reduced in their viscosity. In addition, the 200-liter element can be used in conjunction with the HBD Base Drum Heater to shorten the heating-up time further.

The HSHP – Drum Heater (220 °C) is suitable for steel drums (and with restrictions also for plastic drums). The outer material is a Teflon which is released for contact with food. The material possesses high levels of chemical and acid resistance. However, products such as waxes, soaps and materials with high water content can be heated excellently as well. The drum heating jacket is lightweight, robust and free of silicone. The excellent thermal transfer properties due to the perfect fit result in homogenous temperatures. Our silicone-free high-temperature drum heater is available in the standard size of 200 liters but can also be made to customer specification.

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

Type: R 6 Manufacturer: Nivoba Description: Drum strainer

-suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. -with a towing bar -swivel castors Ø 180 mm, fixed castors Ø 80 mm -Type FHR 600 G for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic l-ring drums, plastic double l-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums -individual construction on request: e.g. stainless steel for “ex”-zones in compliance with “ATEX 95”

-steel construction -spray painted or hot-dip galvanized -Load capacity in kg: 360 -Dimensions (l x w x h) mm: 1020 x 100 x 450

-range of rotation up to 270° -2 swivel castors Ø 175 mm and 2 fixed castors Ø 200 mm made of solid rubber, both swivel castors with brake -safe pick-up guaranteed; drum is held by the tension band at the front and spindle at the top with crank handle and self-braking gear box Types available Type L/E electric-hydraulic construction fitted with maintenance-free battery 12V/88Ah and charger for 230 V mains connection Type L/M hydraulic construction with manual pump

-4-point clamping system -release activated by the guiding rod Types available -Type 4P for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums -Type 4P-D for plastic drums with a lid ranging from 120 to 220 litres

-3-point clamping system -automatic eccentric lock -ideal for charging over or salvage drums -adjustable positioning feature

-sturdy frame with fork sleeves -prism pick-up with tension belt and -double worm gear -can be secured to prevent slipping -load capacity 300 kg -range of rotation 360° -suitable for pick-up by a forklift truck, dumper or crane Types available -Type FLEX-HK tipping process by crank handle -Type FLEX-K tipping process by loop chain

-steel construction -spray painted or hot-dip galvanized -Load capacity (in kg): 300 -Dimensions (l x w x h) in mm: 768 x 200 x 419

-rubber guard to prevent damage to drum (can be replaced) -locking lever to secure in open position -operating lever to adjust tilting position

-sturdy construction -clear line of vision for the driver -standard galvanized gripping head -rubber guard(s) to prevent damage to drum(s) -gripping mechanism screwed to frame -incredible gripping strength -can be secured to prevent slipping Types available -Type RS/M for 200 litre steel bunghole drums, steel drums with a lid, rolling hoop drums and 220 litre plastic L-ring drums -Type RS/91 for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums, with wide drum rim edge

Various heater types available, eciency and robustness characterise directly heated drum dryers by Büttner. They are used for drying wood particles, strands, sugar beet pulp and all free-owing types of wood, biomasses and bulk solids Features Water evaporation capacity of up to 80 t/h depending on the product Direct heating system with multi-fuel burners in combustion chambers Direct heating system using ue gases from energy plants Direct heating system using waste gases from turbines or engines All combinations of these types of heaters are possible. A ash tube may be used for pre-drying and oversize separation of material that is quite moist. Material separation via cyclones or drop boxes Function The material to be dried is admitted through an air-tight rotary air lock into a rotating single-pass drum dryer. The dryer drum can be tted with specic internal ights to suit the material to be dried. This results in an increase in surface area and thus an increase in eciency

The drum debarker, type PDD, was developed for the economical and gentle debarking of logs. The drum debarker is not only used for the production of berboards or OSB but in all industries where thoroughly debarked round logs are required. The system, based on a modular design, was built for the debarking of logs with medium and large diameters at high capacity in order to meet the high demands of panel manufacturers. Key features Electromotive drive Power transmission via truck tires Wear-resistant carriers for log transports Adjustable retention time of the logs Debarking by friction of the logs against each other Advantages Adjustable degree of debarking Economical and at the same time gentle debarking Modular design allows an adjustment to the required plant capacity Options Horizontal convey for long logs Gravity feed chute for short logs

The All-In-One Mixer The basic principle of the MIXACO sack and drum mixer Speedy™ is the mixing of small batches directly in sacks or drums. Specially developed dead-space free mixing sacks with a capacity of 50 or 100 liters are available for powder and granulates. Volumes of up to 200 liters can be mixed in drums. Besides powders and granulates, liquids can also be mixed. The MIXACO Speedy™ is the ideal solution in terms of internal logistics: the product is weighed, mixed, moved and stored in the same sack or drum. All Benefits at a Glance • Only one container required for weighing, mixing, conveying and packaging the product • No refilling or transferring required • Short tool cleaning times • Highly flexible • Many combinations of tools and motors possible for a wide variety of mixing applications • Low energy consumption

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 800 x 800 x 455 -Retention capacity in l: 222 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 285 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

Dispense oils etc. from 60 or 200 litre drums, wherever necessary - mobile, safe, simple

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 800 x 360 -Retention capacity in l: 240 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

-construction made of 2 mm steel sheeting -100 mm ground leeway -galvanized grid (load capacity 650 kg/m²) -conical construction -can be stacked -for use with a pallet truck or forklift truck -shipping unit: 15 units on a europallet -for flammable liquids of the GHS-categories 1-3 -for water pollution liquids of the GHS-categories 1-4

Telecommunication pipe – cable conduits made of PE-HD on drums or in coils Z.I.S. cable conduits made of PE-HD, manufactured acc. to DIN 16874 with external supervision by MPA, Darmstadt or DIN 16876 Standard design: Material: PE-HD according to DIN requirements Colour: black Inner surface: inside grooves, to reach max. pulling-in and blowing-in length Delivery type: on rental drums or in coils Labelling: to DIN requirements Possible designs: Material: PE80/PE100 acc. to DIN 8074/8075 Coloured: coextruded stripes Outer surface: coloured co-extruded or solid dyed Inner surface: smooth Type: composite pipes – side by side, parallel, loose wound on reel Delivery type: one-way-drums Individual length: on drums or in coils Labelling: acc. to customer specifications SDR types: SDR 33 – SDR 11

-construction made of 2 mm steel sheeting -spray painted or hot-dip galvanized -100 mm ground leeway -galvanized grid (load capacity 1000 kg/m²) -Dimensions (l x w x h) in mm: 1200 x 1200 x 410 -Retention capacity in l: 440 -for flammable liquids of the GHS-categories 1-3 and water pollution liquids of the GHS-categories 1-4

1. NBR shaft seals on hardened cylinder barrels Drum motors axles are usually manufactured from ST37. Commercially available seals rotate directly on the axles. The result, at some point in time, is grooves on the axle. In addition of course oil leaks. This is not the case with the FTK Förderband Technik Kilian pulley motors all drum motors are equipped with hardened and polished cylinder barrels made of stainless steel 316. 2. Oil loss is not a problem for us! Oil change after 50,000 hours of work. Today, for reasons of cost, fewer and fewer users concern themselves with plant maintenance. The maintenance of complex plants is mainly carried out by outside specialists. Simple prefabricated parts, however, are usually used till worn out. This is also the case with drum motors. We have made allowance for this behaviour. The FTK Förderband Technik Kilian drum motors only require an oil change after 50,000 hours of work. In the case of operation with 3 shifts for example

For the special requirements of your belt conveyor system, we manufacture for you idler pulleys, carrying idlers, throbbing drums, lift pulleys with or without internally located cone. With diameters up to max. 1,000 mm and lengths up to max. 4,500 mm, these are suitable for all types of belt conveyor system. All pulleys are turned cylindrically or spherically. The axle connections can be delivered in alternative designs with internal bearings, welded, with wedged connections or with clamping set shaft connections. Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be delivered upon request.

For the special requirements of your belt conveyor system, we manufacture for you drive pulleys, carrying idlers, throbbing drums, lift pulleys with or without internally located cone. With diameters up to max. 1,000 mm and lengths up to max. 4,500 mm, these are suitable for all types of belt conveyor system. All pulleys are turned cylindrically or spherically. The axle connections can be delivered in alternative designs with internal bearings, welded, with wedged connections or with clamping set shaft connections. Special designs such as stainless steel and/or friction linings (ceramic, rubber) and accessories (pedestal bearings) can be delivered upon request.