Desiccation - Import export

TTR 250 Ex stainless steel desiccant dehumidifiers For use in Ex-proof zones ... The TTR 250 Ex complies with the ATEX Products Directive 2014/34/EU and was specially developed for dehumidification in hazardous areas (non-conductive dusts). Ex protection: ATEX zone 22 (Ex II 3D Ex c T240 °C) With the TTR 250 Ex you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany. The standard operating hours counter of the TTR 250 Ex is optionally also available as a dual counter for the additional MID-compliant registration of the power consumption. A few practical benefits: * - Robust high-quality dehumidifier “made in Germany” * - Corrosion-resistant stainless steel housing * - Integrated heat recovery * - Self-regulating PTC heating * - Ampere meter to control the operating condition * - Operating hours counter

Stainless steel desiccant dehumidifier TTR 250 HP Special design for particularly long air transport distances ... The TTR 250 HP is not only standard-equipped with a radial fan but also with an additional extra-powerful fan motor which allows an especially high compression. This makes this dehumidifier especially well-suited for applications where air has to be transported over long distances or several levels, for example ships’ rooms, cellars or bunkers. The standard ex factory configuration of the TTR 250 HP is designed for the transportation of moist air. The dryer can be set by the customer to a different configuration, should the need arise for high-pressure dry air to be conducted away instead of moist. With the TTR 250 HP you can benefit from a professional desiccant dehumidifier originally produced by Trotec which has been developed and manufactured according to the highest of quality standards in Germany.

Industrial desiccant dehumidifier TTR 2000 The stationary desiccant dehumidifier TTR 2000 impresses with a dehumidification performance of 259 kg / 24 h Humidity control at its best Several hundred kilogrammes of dehumidification performance per day present no challenge for the TTR 2000 – not even in cold ambient conditions with low dew points. Therefore, the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial, haulage or utility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.

Desiccant dehumidifier TTR 300 The mobile dehumidifier TTR 300: Maximised performance with minimised dimensions and weight Due to the very good dehumidification performance even at low dew points, the TTR 300 quality dehumidifier is a dryer for flexible use for humidity regulation in production areas and storerooms as well as for protection against corrosion and condensation in humidity-sensitive environments and facilities. The advanced electronic Monoventic air volume regulation of the TTR 300 allows infinite, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 300 can therefore be defined as required at any time, e.g. for smaller rooms or applications for which only small volumes of air are required.

DESICCANT DEHUMIDIFIER TTR 400 DThe mobile dehumidifier TTR 400 D: Maximum performance and double flexibility thanks to Duoventic The TTR 400 D desiccant dehumidifier not only impresses with its very good dehumidification performance even at low dew points well below 0 °C but also with maximum versatility due to the TTR Trisorp Dual principle of operation: Two separate air flows for dry and regeneration air with two separate fans for each circuit allow an efficient pressure-tolerant recirculation when setting up the dehumidifier outside as well as inside the room to be treated. Variable circulating air drying with the TTR 400 D ensures power-saving dehumidification at an increased drying rate: Compared to the "outdoor air" supplying the regeneration air, in contrast to conventional through-air operation, up to 30 °C lower dew point temperatures can be achieved with the TTR 400 D for a nominal dry air volume.

Industrial desiccant dehumidifier TTR 2800 The stationary desiccant dehumidifier TTR 2800 impresses with a dehumidification performance of 376 kg / 24 h Humidity control at its best Even nearly 400 kilogrammes of dehumidification performance per day present no challenge for the TTR 2800 – not even in cold ambient conditions with low dew points. Therefore, the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial, haulage or utility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.

Desiccant dehumidifier TTR 400 The mobile dehumidifier TTR 400: Maximized performance with minimized dimensions and weight Despite its impressive dehumidification performance even at low dew points, the TTR 400 is compact and therefore well suited for mobile use. That makes this dehumidifier a universal solution for keeping dry and process air conditioning for industrial applications, for protection against corrosion and condensation in waterworks and pump stations, for anti-corrosion measures during standstills, for sandblasting and corrosion protection work as well as for applications in the building industry. In all applications, the advanced electronic Monoventic air volume regulation of the TTR 400 allows infinite, demand-oriented regulation of the required dry air volume.

Desiccant dehumidifier TTR 200 The lightweight under the high-quality dehumidifiers: the extremely compact and mobile TTR 200 The TTR 200 is an extremely compact and lightweight quality dehumidifier for keeping room air continuously dry or for drying during water damage restoration. All TTR 200 are equipped with the advanced electronic Monoventic air volume regulation which allows stepless, demand-oriented regulation of the required dry air volume. Dehumidification performance and thus power consumption as well as noise emission of the TTR 200 can therefore be defined as required at any time. Even the standard model has an integrated DIN socket for remote switching to control the TTR 200 by means of an optional hygrostat, time clock or other external switching devices with matching DIN plug.

Industrial desiccant dehumidifier TTR 6600 The TTR 6600 is a stationary high-performance desiccant dehumidifier impressing with an enormous dehumidification performance of 892 kg / 24 h Keeping humidity perfectly under control With about 900 kilogrammes of dehumidification performance per day and a nominal air volume of 6,600 cubic metres of dry air per hour at a static pressure of 400 Pa the TTR 6600 is optimally prepared even for a high dry air demand in cold surroundings and with low dew points. Best prerequisites e.g. for permanent dry keeping, gas dehumidification or the production of dry air in the chemical, pharmaceutical and food industry as well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example in water processing facilities or electrical control centres.

Industrial desiccant dehumidifier TTR 8200 The TTR 8200 is a stationary high-performance desiccant dehumidifier impressing with an enormous dehumidification performance of 1,108 kg / 24 h Keeping humidity perfectly under control With more than 1,000 kg of dehumidification performance per day the industrial desiccant dehumidifier is ideally suited for various dehumidification tasks in industrial, haulage or utility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.

Industrial desiccant dehumidifier TTR 3700 The stationary desiccant dehumidifier TTR 3700 impresses with a dehumidification performance of 492 kg / 24 h Humidity control at its best Even 500 kilogrammes of dehumidification performance per day present no challenge for the TTR 3700 – not even in cold ambient conditions with low dew points. Therefore, the industrial desiccant dehumidifier is ideally suited for the most diverse air and gas dehumidification tasks in industrial, haulage or utility companies, for instance to secure products and production, for the value retention of machines, inventory and buildings through constant protection against corrosion, condensation or mould formation.

DESICCANT DEHUMIDIFIERS TTR 500 DOur powerful mobile TTR dehumidifier: the TTR 500 D with Duoventic. Simply convincing! The TTR 500 D dessicant dehumidifier not only impresses with its very good dehumidification performance even at low dew points well below 0 °C but also with maximum versatility due to the TTR Trisorp Dual principle of operation: Two separate air flows for dry and regeneration air with two separate fans for each circuit allow an efficient pressure-tolerant recirculation when setting up the dehumidifier outside as well as inside the room to be treated. Variable circulating air drying with the TTR 500 D ensures power-saving dehumidification at an increased drying rate: Compared to the "outdoor air" supplying the regeneration air, in contrast to conventional through-air operation, up to 30 °C lower dew point temperatures can be achieved with the TTR 500 D for a nominal dry air volume . Double flexibility thanks to Duoventic

Industrial desiccant dehumidifier TTR 5200 The TTR 5200 is a stationary high-performance desiccant dehumidifier impressing with a dehumidification performance of 698 kg / 24 h Keeping humidity perfectly under control Be it to prevent corrosion damage resulting from condensate, to ensure the best possible manufacturing quality of stored goods susceptible to moisture, to keep cooling zones free of ice or to accelerate drying processes as well as for the establishment of a climate-optimized production environment – the continuous provision of large dry air volumes even at very low dew points makes the constantly controllable TTR 5200 an ideal dehumidification solution for many industrial applications.

Stainless steel desiccant dehumidifier TTR 250 The TTR 250 guarantees reliable adsorption air dehumidification in the corrosion-resistant stainless steel housing The low-maintenance TTR 250 stainless steel desiccant dehumidifier does not only guarantee high dehumidification values especially at low dew points. Its housing is also known for a high corrosion resistance and good hygiene characteristics. The TTR 250 is therefore perfectly suitable for humidity regulation in production and storage areas as well as for protection against corrosion and condensation in all humidity-sensitive environments and facilities where special hygienic standards apply or where there are extremely material-straining atmospheres.

INDUSTRIAL DESICCANT DEHUMIDIFIER TTR 800Flexible all-rounder with 86 kg / 24h dehumidification performance for a variety of industrial fields of application Keeping humidity perfectly under control The maintenance-friendly desiccant dehumidifier TTR 800 not only guarantees high dehumidification levels even at very low dew points – with its stainless steel housing and an electrical control box in IP53 design, the corrosion-resistant TTR 800 even withstands adverse operational environments and is therefore ideally suited for a variety of dry keeping tasks or the production of dry air in the chemical, pharmaceutical and food industry as well as in the sector of mechanical engineering, but also to protect machines, inventory and buildings from corrosion, condensation and mould formation, for example in water processing facilities or electrical control centres. High Performance made in Germany

Combination of air breather and water removal filter with integrated check valves to increase the lifetime of the desiccant material; particularly suited for gearbox applications Features ▪ Available in 4 different sizes with diameter of Ø68 mm / Ø2.68 in, Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Equipped with spring-loaded check valves in opposing directions with an opening pressure of 0,01 bar / .15 PSI ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element

Combination of air breather and water removal filter Features ▪ Available in 4 different sizes ▪ Diameter of Ø100 mm / Ø3.94 in or Ø130 mm / Ø5.12 in ▪ Refillable with drying agent (non-toxic ZR gel grain) or a mix of drying agent and active carbon ▪ Drying agent capable in changing colour from Red to orange with increasing moisture ▪ Without dangerous substances according to EC Council directives 99/45/EC and 2001/60/EC ▪ Replaceable air filter element SGB ▪ Connection: Male BSP thread (ISO 228) on Stainless Steel tube ▪ Available with adaptor plate to simplify installation and to enable the use of a visual contamination indicator ▪ Adaptor plate ▪ Visual contamination indicator ▪ Drying agent refilling material ▪ Active carbon refilling material ▪ Replacement air filter element