Crosses - Import export

Avola GAMA 65 V revolving cross cut / rip cut saw Equipment / scope of supply- Cutting heights 90° / 245 mm - 45° / 164 mm - 30° / 113 mm - Machine table with lateral movement approx. 400 mm with pneumatic brake system - Machine hood with lateral PVC protective curtains - pneumatic clamping cylinder left - right - pneumatic cross-cutting operation using two-hand control - electrical saw blade inclination 90 – 30° - Revolving table 0 - 270° - Laser light for cross-cutting - Saw bla de height adjustment via mechanical stop system with scale - TCT saw blade 650 mm, dust extraction spigots 160 / 125 mm - Drive motor 12 kW – direct motor speed 1/min – 3,000 - Saw blade speed 1/min – 3,000

Avola GAMA 65 K Revolving Cross Cut Saw for professional applications Technical Equipment Motor rating 8,1 kW/400 Vac-50 Hz, star / delta start sawblade mounted direct on motor shaft Motor speed 3.000 rpm / sawblade speed 3.000 rpm Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm Electrical sawblade inclination 90 – 30° – digital readout Revolving table 20° – 160° Two-hand pneumatic cross cutting operation Laser light for cross cutting position TCT-sawblade, dia. 650 x 30 mm x T 54 Dust extraction spigot 125 / 80 mm Options Additional clamping cylinders, horizontal, left-right Brush curtain for safety clamping hood

• For Pozidriv cross-head screws • The ergonomic multi-component design with integrated soft zones and pronounced quick driving area makes it possible to work quickly without getting tired thanks to the optimum and hand-friendly power transmission • The handle core made of impact-resistant hard plastic is sheathed with various soft components and embedded highly flexible cushions which optimally adapt to the hand and ensure maximum force transmission • The flexibility of the material and the pleasant feeling of the high-speed turning zone additionally increases the sensitivity and supports the precise application of force • The oval shape and the roll protection on both sides prevent annoying rolling away at the workplace • Practical hole booklet for hanging up the tools or for inserting a lever • Bit holder for the drive by, e.g. a ratchet or a cordless screwdriver • Blades hardened and chrome-plated with black tip • Blades made of chrome vanadium steel

These are the accessories use in printer ,use in internals.

Our classic product in countless variations. With or without a 2 mm base plate. For easy, systematic slab laying on solid/ level substrates.

The AZOR PROFI filling valve is used when the max. line pressure of 10 bar is not high enough, as it is designed for a max. pressure of 14 bar. It is also a bit more compact than the EURO filling valve.

zinc diecasting*powdercoated*for rods up to 20 mm Ø*4-way connection

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

MULTI CROSS RILLO couplings are highly torsionally flexible tyre couplings with progressive torsional deflection haracteristic. The salient feature of the MULTI CROSS RILLO shaft couplings is that the coupling hubs are supplied with commercially available taper bushes for nominal torques of up to 11500 Nm. This allows easy and time saving mounting of the coupling hubs on the shaft. Special tools are not required. The most important attributes and advantages of the highly flexible MULTI CROSS RILLO couplings: High torsional flexibility with progressive torsional deflection characteristic High compensating capability for axial, radial and angular misalignments Easy and time saving mounting of the coupling hubs thanks to the use of taper bushes Radial change of the rubber element without axial movement of the coupled machines Backlash-free torque transmission even in case of alternating directions of rotation High torsional vibration and shock load damping capability Noise level...

The MULTI CROSS FORTE is a highly flexible coupling with progressive torsional stiffness. The special characteristic of all MULTI CROSS FORTE couplings is the use of transmission elements, which are alike within the same type series, but their number vary according to the size of the coupling. The most salient characteristics and advantages of the highly flexible MULTI CROSS FORTE coupling: Very high torsional flexibility with a progressive torsional characteristic line High compensation capability of axial, radial and angular misalignment Backlash-free torque transmission even for reverse rotation High torsional vibration and shock load absorbing capability Good removal of heat which may be generated by the damping effect of the coupling Easy alignment of the coupling Positive fit between transmission element and hub flange to prevent relative movement Cost-saving spare parts inventory by use of the same element size within one series type We are glad to see that you are...

Open wire heating elements are the best solution for air heating when used in fans. Because of our longlasting experience in this field, we can offer you a series construction in most cases. To use our open wire or coil heating elements in air, the installation of a cut-out is necessary (heat accumulation). The connection is done by a plug at the element (Faston 4,8 or 6,3) or by a cord set. Our extended range of air heater variants comprises: -> Heaters for Laundry Dryers (series & spare parts types) -> Heaters for Cross Flow Fan -> Heaters for Powerful Radial Blowers -> Heating Crosses & Special Designs Various special designs for airflow heating, deploying heater spirals on insulating mica support, are available. They are required when the available space for installation is limited and defined geometrical air ducts do not exist. All special open wire heaters are individual designs, i.e. custom-made.

The proven secutex wire coil mat reliably prevents scratches and dents. The lightweight mat can be positioned quickly. Users especially rate the new rolloff stop. The individual wire rings hook firmly into the transverse grooves. The wire bundles no longer slip and an additional bundling is no longer necessary.

Highly flexible coupling with progressive torsional stiffness MULTI CROSS FORTE MCF * Very high torsional flexibility with a progressive torsional characteristic line * High compensation capability of axial, radial and angular misalignment * Backlash-free torque transmission even for reverse rotation * High torsional vibration and shock load absorbing capability * Good removal of heat which may be generated by the damping effect of the coupling * Easy alignment of the coupling * Positive fit between transmission element and hub fl ange to prevent relative movement * Cost-saving spare parts inventory by use of the same element size within one series type

Cross Connector Nr. 51

Cross Connector Nr. 50

high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle

Cross Connector Nr. 50

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.

Efficient use of waste heat (up to 1.000 °C) In many production processes waste heat occurs in form of hot air which is put out to the environment without any use. Very often these hot gases are contaminated air. On the other side clean (cold) air must be warmed up for the production process. In these cases cross flow heat exchanger can reduce the energy costs. The hot air stream will be conducted in the cross or counter flow method over the cold air inside the cross flow heat exchanger. Though both air streams are strictly separated because of the construction of the heat exchanger and they don´t get mixed (leakage less than 0,5 %). Only the energy of the hot waste stream is transferred to the cold clean stream.

Customized air-air heat exchanger for the industry (up to 1.000°C) Hot outgoing air and cold incoming air Very often hot exhaust gas gets out in the environment without any use. On the other hand cold incoming air must be lead into the production process and shall be warmed. This occurs for example very often within drying technology. In this case air-air heat exchangers can be used very efficient in heat recovery. As result you have great potential to save energy expenses. Three types of air-air heat exchangers The Anthermo GmbH delivers three types of different air-air-heat exchangers: cross-flow heat exchanger straight-tube heat exchanger flat-tube heat exchanger The technical figures (for ex. amount of air, temperature, pressure, waste of air) can be different for the air-air heat exchanger. Also the operating conditions and the environment conditions can vary from application to application.

Cross Hinge Part Nr. 28

Highly flexible tyre coupling MULTI CROSS RILLO MCR * High torsional flexibility with progressive torsional deflection characteristic * High compensating capability for axial, radial and angular misalignments * Easy and time saving mounting of the coupling hubs thanks to the use of taper bushes * Radial change of the rubber element without axial movement of the coupled machines * Backlash-free torque transmission even in case of alternating directions of rotation * High torsional vibration and shock load damping capability * Noise level insulation * Wear-resistant and maintenance-free

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

Cross Hinge Part Nr. 22

Cross Connector, flexible Nr. 50 flexibel

Cross Connector, in different angles Nr. 50 a