Results for
TROTEC GMBH
Germany
The PD200 is a professional impulse current measuring system to detect leak (holes) in non-conductive sealing systems and is suitable for leak detection on balconie, pond liners/swimming pools or flat roofs. In contrast to the previous model PD100, the PD200 has extremely compact dimensions - the size of the device could be reduced by more than 30%! These compact dimensions enable the transport of the PD200 e.g. through so-called safety ladders to the corresponding flat roof.The impulse current measuring system easily wins the weight comparison with its previous model. Although the single components partially are pretty heavy (e.g. the transformer), the total weight could be reduced by about 20% (from 11.2 kg to 8.6 kg). On top of the housing there are clearly visible signal lamps - one standard impulse signal (green) and one short-circuit signal (red), incl. integrated tone generator.
Request for a quoteTROTEC GMBH
Germany
The T660 is a moisture meter that you can connect to a PC with the use of a USB cable. The MultiMeasure Studio Software, free in the service/ download section of company website, can be used to measure values from the T660, online and in real time on any PC. The values of this item can be saved for later analysis and for use in report. There are a few practical benefits, with the measuring device being designed and produced in accordance to the highest quality standards. There are two premium components, constructed with the IP54 rating. The item comes with an easy to lean glass surface made of high scratch-resistant. The capacitive touch screen control panel and the high resolution color display for simultaneous indication of two measured values is another major advantage, while the quick and non-destructive determination of near-surface moisture distribution is another major advantage.
Request for a quoteMERECS ENGINEERING GMBH
Germany
Development and construction of test systems for environmental simulation, i.e. climate and temperature tests as well as corrosion tests (e.g. MEMS testing and automotive durability tests on tilt sensors, inclination sensors, inertial sensors, inclination sensors, automotive parts and many more). - Adjustable humidity - Typical temperature ranges are -72 to + 120°C - Parallel testing and calibration of more than 100 DUTs simultaneously per test run - Various interfaces to the DUTs can be switched like CAN, LIN, Flexray etc. - Database connection and automated data analysis using Microsoft PowerBi can be added.
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
The CSN® type RCVoltage Dividers consist of a proven reliable and high accuracy resistivecapacitive voltage divider. These are used for voltage measurement for control and protection systems in HVDC links and research institutes. The base for our Voltage Dividers are metal wire resistor webs that have been embedded in epoxy resin under vacuum. In this way, optimal protection against external influences can be achieved. Depending on the installation requirements (outdoor or indoor application), special designs of the voltage dividers adapted on the site requirements are used. The insulation medium (air, N2, SF6) can be easily adapted to the special requirements of the application. Our CSN® RCVoltage Dividers are characterized by
Request for a quoteTROTEC GMBH
Germany
When it comes to applications such as fog production, the very powerful turbine in this product series and FS200 fluid pump can be adjusted continuously, being adapted more precisely to individual operating conditions. The item is known for its low fluid consumption, as well as the maximum 100ml per minute. The item is continuously controllable, with reduced dimensions compared to its predecessor. The 40% smaller space-saving solution comes with foldable canister, being extra dense with smoke because of the controllable fluid pump. The item is easily portable because of the narrow passage like a safety ladder, while the intelligent energy coupling of heating, pomp and turbine is also possible, ensuring a constant thick fog, without any reheating induced disruption. FS200 - the technical data: Fog time at max. level: approx. 210 s Fog time at medium level and below: permanent fog Compressor performance: 1,500 W Fan turbine performance: 1,600 W
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
The WBT01 workshop battery test system is used to detect or localise leaks in vehicle drive batteries. The device is currently available in three versions: - for overpressure type WBT01-AF - for vacuum type WBT01-BF - combined for positive/negative pressure of type WBT01-ABF
Request for a quoteTROTEC GMBH
Germany
DL200P professional data logger is used for inspecting production processes, reliable climate logging, determination of material moisture and practical data readout using externally connectable sensors and USB or LAN. The USB adapter supports long term logging. The instrument is provided with external measurement sensor for measuring surface, air and material temperature and wood and building moisture, internal sensor (temperature) working on NTC principle measures in the range 20 °C to +50 °C, accuracy of ±0.3 °C and display resolution of 0.1 °C, internal sensor (moisture) working on capacitive principle measures in the range of 10 to 95 % RH, accuracy of ±2 % RH and display resolution of 0.5 % RH and external electrodes measuring wood and building moisture works on principle of resistance measuring method, measure in the range of 15 to 100 digits and accuracy of ± 3 digits.
Request for a quoteTROTEC GMBH
Germany
The Trotec PC200 Particle Counter features 6 measuring channels (0.3, 0.5, 1.0, 2.5, 5.0 and 10.0 μm) with three counting modes (concentration, cumulative and differential) and counting efficiency of 50% at 0.3 μm and 100% for particles beyond 0.45 μm. The internal pump allows flow rate of 2.83 l/min (0.1 ft³/min) and the zero count is < 1 particles / 5 min with a coincidence loss of 5%, 2 million particles per ft³ (28.3 liters). The Laser class 3B with wave length of 780 nm and 90 mW is used as a light source while isokinetic probes serve as sample inlet. The device can be used to easily acquire readings on air temperature, humidity, dew point temperature and wet-bulb temperature.
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Test gas consisting of 95%N and 5% H2 - Robust hand-held unit with integrated suction pump - Measuring range 1ppm to 1000ppm - Fast response time
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Different flow ranges possible - Overpressure and underpressure possible - Two measuring ranges possible in one device
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Overpressure and vacuum possible - Different pressure and flow ranges possible - Several measuring ranges possible in one device - Modern operation via 5" touch graphic colour display - Completely remote controllable, optionally via ProfiNet
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Lite version - 1-channel application only - Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, long-life version
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible
Request for a quoteAPT ANGEWANDTE PROZESSORTECHNIK GMBH
Germany
Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design
Request for a quoteTROTEC GMBH
Germany
The MD200, manufactured by Trotech®, is a magnetometer suited for covered ferromagnetic metals locator such as valve caps and rods, hydrants, metallic manhole and tank covers, and the like. It is designed for environments like in the blazing heat, bitter cold, under water or in the snow to supply a location results that is accurate. It comes with a benefit of a covered ferromagnetic metal with a speedy detection and a reliability that prevents the detection of all non-magnetic metal objects due to its high sensitivity, and with an auto-manual adjustment that can function for 24 hours. Furthermore, a backlit display can be read easily along with a rotation function. It is designed to minimize discomfort and lightweight of only 830 g.
Request for a quoteTROTEC GMBH
Germany
The T610 is a handheld measuring instrument from the Trotec MultiMeasure family, used for quick non-destructive moisture measurement up to 300 mm. Another advantage of the process, aside from the measuring depth, is its independence from the level of salt content in the material. This creates no dissimilarity to the microwave technique, whether it is an older or a new building being gauged. Since the unit’s screen can show two values, for purposes of results evaluation, a function value can be indicated at the same time as the present measured value, if needed. The T610 moisture meter can be linked to a PC through a USB cable. Due to the MultiMeasure Studio Software, the gauged values of the device can be transported online and in real time to the PC. A few practical benefits: German industrial design in robust, premium two-component construction with IP54 type of protection
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
INFICON GMBH
Germany
Versatility and flexibility for a variety of applications Do you have a non-traditional leak detection application that a gas detector, soap bubbles or dye injection system can’t address? Whisper is ideal for detecting and locating ultrasonic frequencies generated when the following common situations occur: • leaks of any gas under pressure or vacuum • electrical arcing • worn bearings and machinery • malfunctions in steam traps • leaking seals The leak detector includes a specialized built-in receiver that detects frequencies in the 40.5 kHz range. Through sophisticated circuitry, Whisper locates the ultrasound’s source, while an internal noise control ensures the instrument is unaffected by audible noise. This makes Whisper a versatile tool which can even be used in noisy environments, such as mechanical rooms. Whisper incorporates heterodyne capability, which reduces the ultrasonic frequencies detected to a range that can be heard by the human ear. Variations can therefore...
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
The CSN® HECT, HEVT and HECT/VT by Schniewindt combines proven sensor technology and opticaldigital data transfer according to the standard IEC 6185092, creating a future orientated solution for applications in high voltage AC substations. The required values to be measured are recorded in analog signal form by conventional sensor elements (R/C high voltage divider for voltage measurement and Rogowski coil for current measurement) on HVline potential and transferred to the RemoteDataModule (RDM) mounted in the head construction of the instrument transformer. The RDM converts the recorded data into a digital serial protocol and transmits them via optical fiber to the Merging Unit (MU), located in the control room. The distance between instrument transformer and MU can be up to 1 km. The MU transfers the data protocol of three instrument transformers into the protocol according to IEC 6185092. For signal output
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The BM26A-1000 is a magnetic level indicator (MLI) for basic liquid applications. The cost-effective level indicator is particularly suitable for continuous level measurement in water storage tanks, condensate receiver tanks as well as wash and surge tanks for fuels, lubricates, additives or similar chemicals. The level indicator features a rugged metallic design with the magnetic flaps housed in an IP68 rated, hermetically sealed glass tube. It provides a highly visible local level indication. There is absolutely no power supply needed. However, in applications with more advanced signal output requirements, the MLI can be easily equipped with optional reed switches or a reed-chain level transmitter providing analogue or digital output signals.
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The OPTIBAR LC 1010 is a submersible level probe for water and wastewater, environmental engineering and OEM applications. It is particularly suitable for continuous hydrostatic level measurement in water wells, rainwater retention and overflow basins or tanks. The level transmitter features a robust stainless steel housing and a high overload-resistant ceramic diaphragm for long-term operation. The diaphragm is flush mounted for safe and easy cleaning on site. The level probe comes with pre-configured measuring ranges from 100 mbar / 1.5 psi to up to 10 bar / 150 psi. Customer-specific ranges are available on request. Its corrosion-resistant TPE cable is approved for use in potable water applications. The OPTIBAR LC 1010 features a 4…20 mA output and optional HART®7 for convenient configuration. The level probe can also be provided with an integrated Pt100 temperature sensor.
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The OPTIFLEX 1100 is a guided radar level transmitter based on the Time Domain Reflectometry (TDR) technology. It is designed for basic storage applications in non-hazardous areas. The level transmitter is a higher performing replacement for traditional level transmitters such as RF capacitance or conductive level transmitters. It offers 3 types of probes which can all be shorted on site.
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The OPTIBAR PC 5060 is a pressure transmitter for process pressure and hydrostatic level measurement in all kinds of process applications. It is designed for absolute and gauge pressure measurement in open tanks and – as dual version for electronic differential pressure measurement – also in closed vessels. The pressure device features a ceramic capacitive measuring cell that guarantees maximum overload and vacuum resistance for high plant availability. The measuring cell can be built into the process absolutely flush and the radially recessed position of the gasket provides additional protection in abrasive media. It is resistant to sudden temperature shocks and can handle operating temperatures of up to +150°C/ +302°F. The OPTIBAR PC 5060 comes with robust plastic and aluminium housing or hygienic stainless steel versions (incl. ingress protection IP69k). The pressure transmitter comes with various diagnostics and digital communication options.
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
The OPTIBAR DP 7060 is a differential pressure transmitter with integrated absolute pressure measurement. It offers a high degree of modularity for various flow, hydrostatic level or process pressure applications. For DP flow measurements it can be perfectly combined with the KROHNE primary elements (e.g. orifice plates or pitot tubes). Featuring a quick response time of just 125 ms, the DP transmitter offers high accuracy and measurement stability under all process conditions. KROHNE is the only manufacturer of process instrumentation to carry out a total 3D linearization of its differential pressure transmitter. For a robust and accurate differential pressure measurement, even under changing process conditions, each OPTIBAR DP 7060 differential pressure transmitter is linearized in all three dimensions during calibration: differential pressure, ambient temperature and static pressure are taken into account in combination.
Request for a quoteOPEN GRID EUROPE GMBH
Germany
Open Grid Europe owns and operates mobile gas pressure regulating and metering (GPRM) stations which you can use under a comprehensive, bespoke service contract, for example when you want to maintain the gas flow during work on a pipeline or require a temporary feed-in point to your gas grid. Technical details: Pressures of up to 84 bar Volumetric flow rates of 800 to 100,000 m3/h Can be connected to telemetry systems Adjustable pressures, flows and blending ratios Gas quality conversion from H-gas to L-gas, if required Thanks to the modular design of the system we can build a mobile station tailored to your specific needs complete with all necessary modules such as filters, pre-heaters, instrumentation and control equipment.
Request for a quotePCB PIEZOTRONICS GMBH
Germany
The Model 682C03 signal converter can be used to supply constant current-fed ICP®/IEPE accelerometers and connect them to 4 ... 20 mA signal circuits. The signal converter supplies an output current proportional to the RMS or peak value of the vibration acceleration, the vibration velocity or the vibration displacement (adjustable). For an individual offer, please contact us directly.
Request for a quoteBRABENDER MESSTECHNIK® GMBH & CO. KG
Germany
The TSSR-Meter can be used to perform conventional isothermal relaxation measurements as well as Temperature Scanning Stress Relaxation (TSSR), an anisothermal stress relaxation measurement method (AISR method). This method can be used to characterize the mechanical-thermal properties of elastomers. An important factor here is the determination of the cross-linking density. With the ever increasing demands on materials, the determination of crosslinking density is an important advantage, and therefore the TSSR meter is particularly suitable for material development and quality control during production.
Request for a quoteResults for
Control instruments - Import exportNumber of results
28 Products