Component protection - Import export

Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.

Designed for high line pressure, the 524 valve series are infinitely adjustable. The chemical nickel plating and a stainless steel seat of the components provide corrosion protection for all valves.

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

The valve series designed for very high line pressure up to 15 bar are suitable for high temperatures. The chemical nickel plating of the components provides corrosion protection for all valves.

GLOBUS Quick-fit ball float valve made of pressed brass, complete with inlet pipe and quick-fit connection. The chemical nickel plating of the components provides corrosion protection for all valves.

Safe upending (90°) and rotating (180°) of coils Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type highstrength chain Rotating drive via welded surfacehardened sprocket, integrated in base Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

Safe upending of coils (90°) Body design in solid welding construction with reinforced base with no pit or floor anchoring needed Body made of strong steel plates Base with large integrated floor plate and attached box construction to protect drive components Tilting unit with neatly welded half shell attachments and two reinforced coil tables welded at 90 degrees to provide safe material seating Bedding via four pressureresistant and fully enclosed bearings with lifetime lubrication Tilting shaft of highquality ductile steel with fully enclosed bearings Tilting drive via threephase motor and triplex type Highstrength chain Tilting function via initiator with arbitrary adjustable tilting point Electrical conrol in switch box with leftright selector switches and estop

JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option

TTK 175 S COMMERCIAL DEHUMIDIFIERPowerful drying technology at the top of the game... The TTK 175 S impresses with a variety of detailed solutions which save you time, enhance your performance and secure value retention – attractively combined in the tried and tested German industrial design – protected prototype. All electrical components are also protected from dust and dampness by default. The special enclosure offers maximum protection of the electronic equipment from anything dangerous which may enter and impair the functionality and durability. This enclosure predestines the commercial dehumidifier for rough environments at various sites. Wheel it in and watch it work – powerful rotary compressor technology in a robust carriage design Thanks to the ergonomic construction and carriage design with a bar handle and large wheels, the TTK 175 S can easily be transported in construction site conditions or up and down stairs.

TTK 125 S COMMERCIAL DEHUMIDIFIER"Nobody can offer as many litres at this weight" The TTK 125 S combines advanced detail solutions for powerful drying applications with a weight-optimized construction in a tried and tested German industrial design – protected prototype. The inner values are in no way inferior to the impressive enclosure: All electric components are specially enclosed to protect the electronic equipment from anything dangerous which may enter and impair the functionality and durability. Thus, the TTK 125 S is also perfectly suitable for drying in rough conditions. Good things come in small packages: Power pack TTK 125 S Due to its extremely low-maintenance design, the TTK 125 S is easy to clean and thanks to its low power to weight ratio and its clever mobility features, it is easy to transport. Nevertheless, in terms of dehumidification capacity, it is no lightweight:

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.

AUTOSOL® POLYMER SHINE PROTECTION quickly and easily seals any type of paint surface and produces a brilliant deep gloss with outstanding roll-off properties. The product provides long-lasting protection for your car against weathering and environmental influences through "state of the art" formulation of paint protection components.

This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has minimal health risks as well as having a low impact on the environment. Safety data sheets SDS silicone oil monochrome (PDF, 43 kB) SDS silicone oil color (PDF, 42 kB) SDS roller cleaning agent "Clean Protect" (PDF, 35 kB) Product information sheet "Clean Protect" (PDF, 33 kB)

High speed professional printing machines use silicone oil in the fusing assembly for toner release and to add gloss to the printout. These systems can be found in color as well as monochrome printers. Besides environmental safety, the following properties are important: Thermal stability Tightly specified viscosity Very low volatile content Chemical purity Functionally designed (amino or mercapto modified) Roller Cleaning Agents Toner particles and paper dust accumulate on fuser rollers over time in toner-based printing processes,. This can result in image quality defects and shortened life of fusing components. Periodic cleaning with “Clean Protect” ensures a safe and thorough removal of any residue on the roller surface. Unlike alternative chemical cleaning substances, “Clean Protect” preserves sensitive roller surfaces, ensures defect-free printouts, and promotes longer fuser roller life. Our product is safe and effective. This cleaning solution is applied manually and has mini

Water-based one-component fire protection impregnation for wood and wood products and building elements with antibacterial and fungicidal properties for interior and exterior use — antibacterial, with fungicidal effect — inorganic — non-combustible — non-toxic — temperature resistant (after drying out) — environmentally safe — high adhesive properties

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.