Compact - Import export

The xiQ offers multiple choices for sensors, boards and connectors. Being extremely small and robust make this camera ideal for machine vision. Specifically, the board-level units are preferred choice for system integrators due to the single board design. These enable the customers to optimize their devices in size, compactness, and footprint. The low heat dissipation and low power consumption are complimentary advantages.

xiSpec is an ultra-compact Industrial hyperspectral imaging (HSI) camera family with outstanding facts and features. - Cameras with 15 to 150 spectral bands - 170 fps with USB3 interface, 340 fps with PCIe - Snapshot and line scan versions - Smallest and lightest hyperspectral cameras available - Low power consumption - Rugged, no moving parts - Flexible and programmable GPIO options The camera housing and the bandpass filters are optimized to improve the spectral performance of the cameras including guaranteed spectral data quality. Each xiSpec2 camera is individually calibrated. The camera specific calibration file and spectral test report is part of the scope of delivery. These snapshot mosaic HSI cameras have the unique capability of more than real time video-rate spectral data acquisition. Each image can be interpreted as a hyperspectral imaging cube immediately. The standard xiSpec2 cameras come with a micro-B USB3 interface.

Special design of through-beam sensor. Transmitter and receiver are located in the fork or angular limbs and are perfectly aligned to each other.

Compact and very efficient. Our fully hydraulic mandrel bending machine delivers outstanding bend quality and very simple handling, with SPS control for preselection and storage of bending angles via a touch panel.

MediorNet Compact is the cost-effective and easy-to-use entry to the Riedel MediorNet world of integrated media signal distribution and processing. It is the first fiber-based 21st-century stage box providing the flexibility of a true real-time media network including integrated signal processing at the cost of simple multiplexing point-to-point products. With a network bandwidth of 50 Gbit/s MediorNet Compact provides enough capacity for bi-directional transport of 12 HD-SDI signal, dozens of MADI streams or GBit-Ethernet signals and hundreds of audio channels or intercom ports – ideal for streamlining the infrastructure of any mobile, studio or live event application.

Compact Rail is a linear system consisting of steel linear rails with induction hardened raceways and high precision radial ball bearing sliders, also made of hardened steel. Thanks to their self-aligning capabilities, Compact Rail linear guides simplify the project, improve the performance and reduce the overall cost of application. Compact Rail linear guides are easy to install on all types of surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release felt pads and are free to rotate with respect to the slider body, so that the felts are always in contact with the raceways to ensure optimal lubrication.

Compact Rail Plus linear guides feature double row ball bearings for higher load capacities and rigid rails with convex raceways and new robust steel sliders with longitudinal protection and floating wipers, Compact Rail Plus has been designed for the most demanding applications in terms of high load capacities, high dynamics and work environment. All while maintaining the self-aligning capabilities that make this product family unique. Sliders are available in four versions: guiding slider (RV); floating slider (RP); extra-floating slider (RU) and rotating slider (RA). Combining two rails with different sliders makes it possible to create self-aligning systems that can compensate misalignment errors on two planes: axial up to 3.5 mm and radial up ±1.3°.

The PRECISION SYSTEM series of linear units are self-sustaining profile systems made of extruded aluminum and steel for the TK series, able to ensure excellent precision. The motion is achieved by means of precision rolled recirculating ball screws with preloaded or non preloaded ball nuts, depending on the models. Using the recirculating ball bearing technology for the screws and the rails ensures great performance to the linear actuators, such as: High precision and high axial forces High mechanical performance Low wear and tear Low resistance to movement High speed (for long pitch screws) The Precision System series consists of 4 distinct products with different features: TH, TT, TV, TK. PRECISION SYSTEM - TH TH linear actuators are rigid and compact, ball screw driven linear units, enabling high positioning accuracy and repeatability in all process phases with optimal performance assured, with a repeatability within 5 µm. Thrust force transmission is achieved by means of...

Uniline System is a family of pre-assembled linear units boasting a compact size and high speed ensured by the COMPACT RAIL roller bearings, mounted on a self-sustaining extruded aluminum profile. The linear units are driven by a steel reinforced polyurethane belt system. The horizontal seals and the raceway cleaners fitted on both ends of the carriage ensure full protection from dirt. The linear actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed and life. The rails in the linear axes of the four product series are laid out in different combinations to meet all application requirements. Using long or multiple sliders increases the...

In addition to the MADI interfaces available on the processor card, the MN-RN300 RockNet Audio Interface Card gives access to the wide range of Riedel RockNet audio interface modules.

MediorNet Compact is the cost-effective and easy-to-use entry to the Riedel MediorNet world of integrated media signal distribution and processing. It is the first fiber-based 21st-century stage box providing the flexibility of a true real-time media network including integrated signal processing at the cost of simple multiplexing point-to-point products. With a network bandwidth of 50 Gbit/s MediorNet Compact provides enough capacity for bi-directional transport of 12 HD-SDI signal, dozens of MADI streams or Gbit-Ethernet signals and hundreds of audio channels or intercom ports – ideal for streamlining the infrastructure of any mobile, studio or live event application.

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

A perfect combination of space savings and dynamics: the GSW Compact Feed Lines Our Compact Feed Lines are an ideal answer to the challenge of a constraint floor and necessity to process thick materials. Marrying the processes of leveling and indexing into one Feeder-Straightener machine allows for a complete Feed Line with only two individual machines and thus greatly reduces the necessary length. Additionally, the decoupling of the coil mass from the indexing process – achieved through a short loop between Coil Reel and Feeder-Straightener – enables dynamic feeding despite the compact footprint. And, if cross-sections are especially big, the loop can be spared completely, creating yet more space. One more advantage, virtually a by-product out of their very nature, is the quicker set-up of our Compact Feed Lines. This elevates them to not only space- but also time-savers!

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

Compact design High cooling capacity High operating pressure Low pressure loss Available acc. ATEX 94/9/EG

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

The smart companion for many different sites: a great variety of machine sizes are available, from 6 mm to 115 mm. This unmatched, tried and tested transfluid classic is a compelling option, thanks to its many benefits, its good price/performance ratio, its very simple, but effective technology and unique quality. Tube measurements up to 60 mm, up to 80 mm and up to 115 mm are covered, depending on the machine. It is also feasible to bend tubes with imperial sizes with the standard tools.

The combination of our very comfortable tennis surfaces (point elasticity) with a sprung floor substructure (surface elasticity) certainly offers maximum force reduction! Hall operators can advertise that their choice of sports flooring offers the maximum in terms of joint protection and force reduction! On the other hand, a sprung floor only develops its comfort when there is a lot of movement. Players who only move a little therefore feel no additional comfort! In terms of ball bounce (flatter) and general playing behaviour (e.g. acoustics), sprung floors are a matter of taste. As a rule, however, players quickly get used to the changed playing conditions. A compact sprung floor can be installed on top of the existing tennis floor covering, provided the surface is level. There is no need to remove and dispose of the old floor covering! If the surface needs to be refurbished, the bonded tennis floor can be removed.

electric compact control with one or two 10l pressure tanks pressurized dispensation made especially for high viscosity lubricants pulsedependent flow control (0 – 99 pulses/min) dispensation time and delay after the incoming signal electrically adjustable via initiator

Monitor mounting compact The monitor mounting in the "compact" version is new to the program and will be available from the end of April 2018 Feature: short design fixing principle with half shells (suitable for retrofitting and extensions) reducing bushes availableh (round or square 20, 25, 30mm)

Format 96 x 96 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 96 mm, portrait Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

Format 48 x 48 mm Two/three step, continuous controller Sensor monitoring Up to 5 outputs 1 Analogue input (universal) 1 Binary input 1 Relay output (closing contact) Self-optimization (autotuning) for exact PID control Manual/automatic mode Configurable limit monitoring (alarms) Setpoint switching Level/keyboard locking RS485 interface (Modbus RTU) Ramp and timer function Firing curve for ceramic furnaces Plug-in controller module Setup interface (USB Mini-B)

The PEKI valve series made in germany has been manufactured for decades from high-quality brass components that are assembled with modern injection-moulded parts and sealing elements made in Germany. The PEKI compact valve is installed in small compact boxes and as a valve with float in drinking water systems.

Linear units / linear guides Linear units are used in almost every single area of automation and machine engineering. From simple adjustments that may be seldom required, right up to highly complex, highly precise and highly dynamic multi-axis systems. Every task is different. And every task requires a technically accomplished, cost-effective solution. RK linear units – variety offers the ideal solution The wide range of RK linear units is the result of the variety of customer applications. What used to be referred to as 'special applications' have now become readily available, attractively priced standard modules. It is therefore likely that the ideal RK linear unit for your particular application already exists.

The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.

This high pressure water jetting unit is extremely flexible due to its usage as a trailer. Three versions of the MK3 with operational pressure of up to 2500 – 3000 bar are available and is ideal for the removal of coating and concrete refurbishment, as well as for the separation and cutting of various materials. The easy to understand WOMATIC 4Control with operational status monitoring, pressurerpm regulation and pressureless circulation ensures high operational safety, low wear and tear, long service life, and last but not least, minimal fuel consumption.

The xiX- Series is the integrators dream. With only 26.4 x 26.4 x 31 mm and 30 grams it is the smallest camera featuring Sony Pregius™. The fast CMOS sensor offers a high range of High Speed and high frame rates from 2.3 Mpix at 166 Fps to 50 Mpix at 33 Fps. The xiX cameras stream images to the host computer via 2 or 4 lanes on a OCI Express Gen2 bus. Together with minimal latencies and CPU load, the cameras are a perfect fit for embedded vision and multi-camera applications. Thanks to flat flex cabling, the board-level and semi-housed variants allow integration in tight spaces and close proximity between cameras.

The machines are extremely robust and easy to operate. A selection of setups is available to process tubes of different lengths, with an operational length up to 240“ Our compact and mobile bending machines can now be controlled easily with a touch panel. This opens up new possibilities, like displaying the comparison of target and actual values for all axes. Control of the tolerance of the length and the rotation means very little involvement for the operator during the manufacturing of tubes. Accessories are available, like an integrated saw, a de-burring device, a flaring tool and a compression-fitting swaging tool.