Cold rolling of steel - Import export

Cold rolled steel sheets are produced by re-rolling process of hot rolled steel sheets in order to provide precise thickness distribution across the coil. The surface roughness of the cold rolled materials is lower compared to hot rolled steels and suitable for painting and coating applications. According to the customers demands, it can be supplied in coil, slitted and cut to length sheet form. Our stock includes cold rolled steel sheet materials produced according to EN 10130, EN 10268, EN 10338, EN 10209 and others.

Cold rolled steel is low carbon steel produced by a "cold rolling" process and processed at near normal room temperatures. Cold rolled steel offers superior strength and machinability. Cold rolled steel sheets are often used for engineering products where close tolerances, concentricity, surface smoothness and coated surfaces are required.

Flat steel products in roll or sheet forms obtained by cold-rolling of hot-rolled flat steel, with thicknesses ranging from 0.20 to 2.00 mm. meeting the expectations concerning the surface flatness and the width and thickness variation and the physical properties of the produced materials fully remain homogenous. Common Grades; As per EN 10130 DC01/DC03/DC04 , ASTM A619/DQ, SAE 1010 /1008/1006

Hot rolled steel is a type of steel that is formed by the hot rolling process at a temperature above its recrystallization temperature. Steel is easier to form at this elevated temperature. Compared to cold rolled steel, hot rolled steel does not usually require heat treatment after forming. Hot rolled steel usually has more mill scale than cold rolled steel.

Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: cold-rolled, 2R Surface finish: bright annealed Norm: EN 10088-1-2-3 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, laser protection film

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2G Surface finish: ground Grain: 240 Ground sides: both sides Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1.5 - 5 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, laser protection foil

Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000

Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 0.8 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000

Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2J Surface finish: brushed Ground side(s) one-sided Laminated page(s): one-sided Standard: EN 10088-2 Dimensions: Thickness (mm): 0.8 Length (mm): 2,500 Width (mm): 1,250

Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Form: sheet Material: 1.4016 (X6Cr17) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 Dimensions: Thickness (mm): 3 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: no film, no paper

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2J Surface finish: brushed Ground sides: one-sided Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 6 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, standard foil, laser protective foil

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 240 Ground sides: one-sided Dimensions: Thickness (mm): 0.6 - 8 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Factory filming: Film 4228, Standard film, Laser protection film

Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2R Surface condition: bright annealed Standard: EN 10088 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, Laser protection film/without stamp, no paper

Form: sheet Material: 1.4541 (X6CrNiTi18-10) Manufacturing method: cold-rolled, 2B Surface finish: cold-rolled pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 320 Ground sides: one-sided eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Stainless steel Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2J Surface finish: brushed Ground sites: on one side Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1.5 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Form: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Manufacturing method: cold-rolled, 2E Surface finish: mech. descaled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 2 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500

Production standart : EN 10051 FOR HR MATERIALS - S235 JR, S275 AND S355 QUALITIES EN 10139 FOR CR MATERIALS - DC 01 , ST 12 QUALITIES EN 10025 – 1