Cleaning cloth - Import export

Microfibre cloth for cleaning sensitive surfaces such as monitors, etc. • Microfibre cloth for cleaning sensitive surfaces • Washable to 95° C • Material: 80% polyester/20% nylon • Cloth dimensions: 200 x 200 mm

50 lint-free, highly absorbent wipes for cleaning plastic surfaces and screens. • Lint-free, highly absorbent fleece wipes • For cleaning plastic surfaces and screens • Ideal for use with DURABLE cleaning fluids • Cut to size individually in 145 x 197 mm format • Contents: 50 wipes

50 individually packed moist wipes for cleaning telephones. • Wet wipes for regular cleaning of telephones, smartphones, etc. • Bio-degradable wet wipes • Ideal for travelling • Contents: 50 individually packed wet wipes

CF 30 G equipment is supplied completely assembled and ready for operation. The dust collection unit is suited for intermittent operation only, because regular cleaning of the pocket filter element in certain intervals is an absolutely must for the proper operation of the equipment. The cleaning intervals will depend on the operating conditions and must be established by experience. Normally cleaning intervals will be between operating times of 30 minutes to two hours. It is a prerequisite for sufficient and intensive cleaning of the filter cloth that dust collecting is interrupted during cleaning to achieve static pressures on the filter material. A retention time of 1 - 2,5 minutes between the end of the suction and the beginning of the cleaning process is therefore required. The filtered air must be removed outside - do not lead back to closed rooms!

100 individually packed moist wipes for cleaning glasses, camera lenses, etc. • 50 pairs of wet wipes • Specially recommended for spectacle glasses, car mirrors, optical appliances such as camera lenses or binoculars • Packed individually in sets of two, ideal for travelling • Contents: 100 individually packed wet wipes

10 individually wrapped moist and dry cleaning cloths for streak-free cleaning of screens and displays. • Wet and dry wipes in set • Especially suitable for sensitive displays and smartphones • Wet wipes bio-degradable • Dry wipes made of high-quality fleece • Ideal for travelling • Contents: 10 individually packaged wet/dry wipe sets

Set consisting of pump spray and microfibre cloth for cleaning and maintaining whiteboards. • Whiteboard cleaning set • For cleaning and long-lasting care of whiteboard surfaces • Suitable for dry-erase whiteboard markers • Contents: 250 ml pump spray, high-quality microfibre cloth 25 x 25 cm

Cleaning set for screens and glass surfaces. Pump spray and a lint-free fleece cloth. • Cleaning set for screens on computers, laptops, tablets, smartphones and navigation devices • Also suitable for cleaning glass surfaces, e.g. on copiers and scanners • Contents: 125 ml SCREENCLEAN FLUID cleaning spray and 20 lint-free fleece wipes

Pump stray for streak-free monitor cleaning. Including a microfibre cloth integrated into the lid to save space. • Cleaning spray for screens on computers, laptops, tablets, smartphones and navigation devices • Also suitable for cleaning glass surfaces, e.g. on copiers and scanners • Including a microfibre cloth integrated in the lid to save space • Ideal for removing fingerprints, dust and dirt • Contents: 200 ml

Privacy filter with magnetic attachment. Prevents others from reading your screen from the side and protects against dirt. Including bag and microfibre cloth. • Magnetic privacy filter for 13.3” screens • Limited viewing angle of 60 degrees protects sensitive data • Idea for use in public • Incl. sleeve for storage • Matt surface and reduced blue light protect your eyes while working • Practical attachment via two neodymium magnets • Protects the screen against scratches and dirt • Can also be used on touchscreens • Incl. microfibre cloth to clean screen and filter • Compatible with screens measuring 294 mm x 166.5 mm (W x H) / 11.6“ x 6.5“ (W x H)

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.