Clamp - Import export

zinc diecasting*powdercoated*cork lined jaws*rod Ø 10 mm

zinc diecasting*powdercoated*cork lined jaws*rod Ø 10 mm

Around installation technology, cable clamps for the fastening of HF cables to telecommunication masts are our speciality. These cable clamps consist of a C frame including retaining feet (for installation on to a C-profile or flat bar) and a fastening screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied. C frame The C frames are stamped bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm. Inlay The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw.

Material 2 mm, galvanisch verzinkt Structure 3-gelenkig mit flacher Bauhöhe Diameter 571 mm Application Metallfässer Fastener Buckelschweißung

Material Rostfrei 4301, 1.5mm Structure 3 Nietgelenke Diameter 500 mm Application Kunststofffässer Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 12 (SW 23) 1.5mm verzinkt Structure 3 Nietgelenke Diameter 571 mm Application Kunststofffässer Fastener Buckelschweissung

Material Warm gew. spaltband Fe P 12 (SW 23) 1.5mm Structure 3 Nietgelenke Diameter 571 mm Application Metallfässer Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) Structure 3 Nietgelenke, ohne Warzen Diameter 300 mm Application Stahlfässer Fastener Punktschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) Structure 3 Nietgelenke Diameter 300 mm Application Metallfässer Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) 1.2 bis 1.7mm Structure 3 Nietgelenke Diameter 400 mm Application Fibre-Drums Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) Materialstärke 1mm Structure 3 Nietgelenke Diameter 340 mm Application Weißblech- und ähnliche Gebinde Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) 1.2 bis 1.7mm Structure 3 Nietgelenke Diameter 300 mm Application Fibre-Drums Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) 1mm (1.75) Structure 3 Nietgelenke, Flache Bauhöhe Diameter 350 mm Application Fässer Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) 1mm (1.75) Structure 3 Nietgelenke Diameter 350 mm Application Fässer Fastener Buckelschweißung

Material Verzinktes Stahlblech Spb. Fe P 01 (St 12-03) verzinkt Structure Nachstellbar mittels Schraube und Feder Diameter 80 bis 500 mm Application Spannringe z.b. für Rohrverbindungen Fastener Buckelschweißung

Material Kalt gew. Spb. Fe P 01 (St 12-03) 1 mm (1.75) Structure 3 Nietgelenke Diameter 350 mm Application Fässer Fastener Buckelschweißung

Material Warm gew. Spaltband Fe P 12 (SW 23) 1.5 mm Structure 3 Nietgelenke Diameter 500mm Application Fässer Fastener Buckelschweißung

aluminium diecasting*roller grips*capacity 0 - 20 mm

aluminium diecasting*roller grips*capacity 0 - 20 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

zinc diecasting, nickel plated*vinyl coated jaws*capacity 0 – 40 mm

safety fastener*cork lined jaws*rod Ø 10 mm

zinc diecasting, powdercoated*capacity 0 - 80 mm*slewing range 360°

M 10 nut*for use in:*Retort Stand Bases*Labjacks

zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm*safety base*Ø 82 mm

Besides their own clamp-band designs Freek also manufactures original Rosemount clamp-bands that can be used as "Husky-replacement heaters" (see spare part cross-reference list). For example the two screw clamp band (FB) and the axial clamp band (FE). Freek has all the various industry standards for clamp-band nozzle heaters in Ø19,05 and Ø22,40 in their assortment, too. HotCoil minitubular heaters with clamp band are a highly demanded and very flexible clamping system, especially for heating larger nozzles and bushings with high power. The size-variable customizable clamp bands counteract the heating's thermal-related "lifting ambition" during heat-up and thus effectively prevent a possible critical overheating. For an even better protection all HotCoil heating elements can also be provided with an integrated thermocouple. As alternative to our standard clamping mechanism with welded clamping elements a space-saving lug clamping mechanism can be supplied.

To protect non-punched documents in combination with spine bars. For approx. 1-100 A4 sheets. 50 per pack. • Polypropylene report covers to protect unpunched documents • For use with A4 format spine bars • Capacity: 1-100 A4 sheets

Easy rope tension For splitted drive wheel RL-ZA011-0250 Material: PA2200 / VA Prices upon request robolink® multi-axis joint robolink® Configurator DryLin® drive systems

EZM Profiline – This EZM brand name stands for cold-drawn standard sec-tions and special sections to customer drawings in virtually all steel materials. Optimum heat-treatment, pickling and coating facilities are available for every material group. As a result of the continuous improvement of our in-house tool production operations, EZM can manufacture sections whose geometry and shape are as near as possible to the net shape, maintaining the tightest tolerances and producing flawless surfaces. Our cold-drawn sections are successfully used when metal cutting is uneconomical due to the great effort and material losses involved, or when the section is to be given specific properties that can only be achieved by targeted cold-forming. In our plant EZM Profil Bearbeitung, based in Rohr/Thüringen, sections are manufactured by machining up to 6,200 mm length and a maximum crossing-section of 125 mm, which are needed for for example for linear guides in the machine and plant...