Results for
Germany
Material Griff : verzinkt, 6 mm Lasche : roh Design 2 stufige Arretierung Fastener Buckelschweißung Application Metallbehälter
Request for a quoteGermany
Material Griff: Drahtdurchmesser 6 mm verzinkt, Lasche: Stahlblech verzinkt 1,2 mm Design Arretierung des Griffes in 3 Positionen Fastener Annieten Application Fibre Drums
Request for a quoteGermany
Material Drahtdurchmesser 6 mm verzinkt, Lasche: Stahlblech verzinkt 1,2 mm Design Griff und Lasche montiert, Griff abgewinkelt Fastener Annieten Application Fibre Drums
Request for a quoteGermany
Material Draht 8 mm Durchmesser Lasche: Stahlblech verzinkt, Materialstärke 1.2 mm Design Griff mit Lasche montiert ggfs. mit Gegenplatte Fastener Annieten Application Schwere fiber-drums
Request for a quoteGermany
Material Griff: 6 mm, verzinkt Lasche: 1.2 mm, verzinkt Design Griff und Lasche montiert mittlere Arretierung Fastener Buckelschweißung Application Lackierte Behälter
Request for a quoteGermany
Material roh. Draht 6 mm Design Drahtbiegeteil Fastener mittels Halteblechen Application Metallbehälter
Request for a quoteGermany
Material Griff: 10 mm, 140 mm breite Design Griff und Lasche montiert Fastener zum Annieten Application Schwere fiber-drums
Request for a quoteGermany
Material Roher Fallgriff (8 mm) mit roher Lasche (1.2 mm) Design 5 Schweißpunkte Fastener Buckelschweißung Application Metallbehälter
Request for a quoteGermany
Material Griff: 7mm, 4301 Niro Lasche: Bandstahl 4301 Design Lasche mit Anschlag Fastener Punktschweißung Application Metallbehälter
Request for a quoteGermany
Material 6mm, verzinkt - 1.2 DX 51 verzinkt Design Lasche mit Anschlag Fastener Punktschweißung Application Metallbehälter
Request for a quoteGermany
Material Draht: 12mm Design Drahtbiegeteil Fastener Anschweißen Application Metallbehälter
Request for a quoteGermany
Material Draht 8mm Durchmesser, eisenblank Design Drahtbiegeteil Fastener Mit Halteblechen Application Gefäße aller Art und Container
Request for a quoteGermany
Material Draht 7 mm Durchmesser, eisenblank Design Drahtbiegeteil Fastener Mit Halteblechen Application Gefäße aller Art
Request for a quoteGermany
Material Griff: Draht verzinkt 8 mm Durchmesser, Lasche: Materialstärke 1.5 mm, mit Anschlag Design Griff und Lasche lose Fastener für Punktschweißung Application Container und andere schwere Gebinde
Request for a quoteGermany
Material Griff: Draht verzinkt 8 mm Durchmesser, Lasche: Materialstärke 1.5 mm Design Griff und Lasche lose Fastener für Buckelschweißung Application Container und andere schwere Gebinde
Request for a quoteGermany
Material Material Draht 8 mm Durchmesser Lasche: Stahlblech verzinkt, Materialstärke 1.2 mm Design Griff ausgebuchtet, mit Lasche montiert ggfs. mit Gegenplatte Fastener Durchnieten Application Schwere fiber-drums
Request for a quoteGermany
Material Draht 8 mm Durchmesser Lasche: Stahlblech verzinkt, Materialstärke 1.2 mm Design Griff ausgebuchtet, mit Lasche montiert ggfs. mit Gegenplatte Fastener Annieten Application Schwere fiber-drums
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
Material Griff: Draht verzinkt 5 mm Lasche: gebogen 1.2 mm, eisenblank Design Griff und Lasche montiert, feste Arretierung Fastener Punktschweißung Application Schwarzblechgebinde
Request for a quoteGermany
Material Griff: Draht verzinkt 5 mm Lasche: verzinkt 45 x 1.2 mm Design Griff und Lasche montiert, feste Arretierung Fastener Buckelschweißung Application Schwarzblechgebinde
Request for a quoteGermany
Material Draht 6 mm Durchmesser, eisenblank Design Drahtbiegeteil Fastener Mit Halteblechen Application Gefäße aller Art
Request for a quoteGermany
Material Griff: eisenblanker und verzinkter Draht 5 mm und 6 mm Durchmesser, Lasche: eisenblank und verzinkt, Abmessung 45x1.2 mm Design Griff und Lasche montiert, feste Arretierung Fastener Buckelschweißung Application Schwarzblechgebinde
Request for a quoteGermany
Material Griff: Hohle, eisenblanke Ausführung Lasche: eisenblank Design Griff und Lasche lose Fastener Punktschweißung Application Werkzeugkoffer
Request for a quoteGermany
ELECTRIC HEATER FAN TDS 50 EPowerful mobile heating in a trice The robust electric heater fan TDS 50 E is the powerful heating solution for the building industry and agricultural sector, for the catering trade or holiday home. With its hard-wearing double-walled housing, the TDS 50 E is on the one hand flexibly prepared for different operating conditions, and on the other hand offers good thermal insulation. Designed for a mobile change of location, the heating device can be transported conveniently using the practical carrying handle. Unlike directly fired gas or oil heating devices, the electric heater fan neither consumes oxygen nor produces combustion gases. Therefore, it can be used basically everywhere provided there is a socket – particularly for temperature control in unheated rooms.
Request for a quoteGermany
COMMERCIAL DEHUMIDIFIER TTK 75 ECOEasily (sup)portable investment for dehumidification and dry keeping The TTK 75 ECO, compact and robust in equal measure, is a pragmatic solution when an equally low-cost and high-quality construction dryer is required. The lightest device of the TTK-ECO series is equipped with cable holders and a retractable metal carrying handle and can so be conveniently transported to the operating site. Thanks to its efficient rotary piston compressor, the low-maintenance device can be transported and stored in any position. And since the TTK 75 ECO comes with a hardwearing steel construction, a rough construction site environment means no harm to this dehumidifier. Once arrived at the target location, the TTK 75 ECO is simply switched on and you're done. It immediately withdraws immense amounts of moisture from the room air – and thanks to the automatic hot gas defrosting even does so at low temperatures in unheated rooms.
Request for a quoteGermany
Being a powerful rapid heater, the compact TDS 20 M is ideally suited for quickly heating cold rooms in the time between seasons or on particularly cold days. Whether for use in a workshop, in living or working spaces – the combination of robust workmanship and discreet design leaves a good impression in every environment. And the thermally insulated carrying handle makes it easy to transport the device from one site of application to the next. Instead of heating wire technology, the TDS 20 M uses an advanced PTC ceramic heating element for heating the air. Advantages of PTC as compared to heating wires: longer lifetime, less sensitive technology, shorter heat-up times, process-related overheating protection – and no burning of dust during heating, which additionally makes this ceramic heater suitable for allergy sufferers.
Request for a quoteGermany
A sturdy basket made of limed willow. It is comfortable to carry via 2 aluminium handles. An ideal shopping companion for organic markets, farm shops or the weekly grocery shopping. Stably woven, this basket can withstand the daily stress very well.
Request for a quoteGermany
TTK 120 E Dehumidifier The TTK 120 E combines trendy design with advanced dehumidification technology in a durable housing construction. Thanks to its robust housing made of stainless steel the TTK 120 defies even the harshest application environments. This makes it to be a flexible dehumidifier from keeping dry living areas, archieves, store rooms as far as drying up after water damages. The change from one operation location to another can be easily achieved due to steering wheels and bar handles on both sides. Special features: SuperDry function (permanent drying) Automatic hygrostat controlled dehumidification Easy-care material combination with an eye-catching look Electronic automatic defrost Warning lamp: to indicate that the water tank is full Overflow protection with auto power off Carry handles, swivel casters Connectivity for an extern condensate drain
Request for a quoteGermany
HIGH-PERFORMANCE FAN TTV 4500 SCascadable fan for construction and restoration work Whether to speed up construction drying, for dust collection or the ventilation on construction sites, in storage spaces and workshops or the agriculture – the TTV 4500 S is a smart ventilation solution for all users looking for a budget-optimized high-performance fan. The particularly compact device is equipped with many practice-oriented details, making its application both convenient and simple. Its equally robust and lightweight integral housing can be stacked up to five times and comes equipped with hose connectors, carrying handle, cable holder and rubber feet for a secure footing. During operation the adjustable 2-stage axial fan can impress with high pressure and an enormous air flow rate of up to 5,000 m³/h – this corresponds roughly to 1,388 litres of air per second. Therefore, the TTV 4500 S is the ideal fan type for the circulation of high air volumes.
Request for a quoteGermany
Due to its high air flow rate and advanced PTC heater battery technology, the high-performance rapid heater TDS 30 M is ideally suited for quickly heating large, cold rooms. Whether for use in a workshop, in living or working spaces – the combination of a robust construction, sound workmanship and discreet design harmoniously integrates in any environment, and the thermally insulated carrying handle makes the device quick and easy to transport. The desired temperature can be regulated as needed via the integrated infinitely variable thermostat of the TDS 30 M. For more targeted warmth, the heating capacity can be increased in two stages up to 5 kW. If required, the fan can also be used in sole fan operation without heating function.
Request for a quoteResults for
Carrying handles - Import exportNumber of results
44 ProductsCompany type