Cams - Import export

2940 pin tumbler - cam lock, with forced closure, cam movements 1-4-6-7, keyed different, brass nickel plated, ø 18 mm, vertical mounting plate steel nickel plated, 2 keys, 1 rose brass nickel plated

7960 pin tumbler cylinder - cam lock, with forced closure, cam movements 1-4-6-7, keyed different, brass nickel plated, ø 16 mm, with external thread, for door thickness 1-16 mm, 2 keys

2988 pin tumbler cylinder - cam lock, with forced closure ,cam movements 1-2-5-6, keyed different, brass nickel plated, ø 18 mm, with external thread, for door thickness 1-10 mm, 2 keys

2987 pin tumbler cylinder - cam lock, cam movements 1-4-6-7, keyed different, brass nickel polished, ø 22 mm, with external thread, for door thickness 1-17 mm, 2 keys

2931 pin tumbler cylinder - cam lock, with forced closure, cam movements 1-4-6-7, keyed different, brass nickel polished, ø 25 mm, with external thread, for door thickness 1-18 mm, 2 keys

7481 PZ cam lock, metal nickel plated, only suitable for adjustable profile half cylinder, 90° cam movement, with forced closure, cam movement 1-8, for door thickness 1-23 mm

7480 PZ cam lock, metal nickel plated, only suitable for adjustable profile half cylinder, 90° cam movement, without forced closure, cam movement 1-8, for door thickness 1-23 mm

8573 FURORE cam lock, with mounting plate, closing direction 1-8, metal nickel plated, for door thickness up to 19 mm, without cylinder core, accessory: 1 rose nickel plated

8570 FURORE cam lock, with external thread, fixing with nut, closing direction 1-8, metal nickel plated, for 1-12 mm door thickness, without cylinder core

9496 security-cam lock, with bore pattern, with forced closure, with drilling protection through rotatable stainless steel cap, ø 25 mm, brass nickel plated, cam movements 1-4-6-7, for door thickness up to 12 mm, 2 german silver keys, without cam

9475 security-cam lock with bore pattern, with forced closure, ø 25 mm, brass nickel plated, cam movement 1-4-6-7, for door thickness up to 12 mm, 2 german silver keys, without cam

2960 pressure cylinder, ø19 mm, 30 mm length, 12 mm hub, keyed different, cylindre brass nickel plated, fixing plate and body metall nickel plated, 2 keys, 1 rose brass nickel plated

2960 pressure cylinder, ø19 mm, 23,5 mm length, 12 mm hub, keyed different, cylindre brass nickel plated, fixing plate and body metall nickel plated, 2 keys, 1 rose brass nickel plated

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

Similar in design to yoke type track rollers with axial guidance, our KIS cam rollers are based on needle roller or cylindrical roller bearings. Instead of an inner ring, they are equipped with a solid bolt. This serves as an inner ring replacement and is provided with a fastening thread. They are ideal for applications that require high rigidity, load carrying capacity and guiding accuracy. Our stud type track rollers are used, for example, in conveyor technology, machine tools and medical technology. Depending on the application requirements, the KIS range offers a wide variety of designs. We are happy to advise you on the right solution for your application!

This involves a play-free electronic switching cam encoder (abbreviated to: NOCI) with a maximum of four galvanically separated1) SIL2 switching outputs that can be set by the customer, and which are activated or deactivated depending on the respective position of the drive shaft. A parameterisable multiturn absolute encoder with incremental interface as well as the four switching outputs are integrated in the compact housing. The switching outputs can be preset. A special shaft design appropriate to the play-compensating measurement gear ZRS is available. The supply voltage, incremental signal and switching contacts are each galvanically separated from one another

This involves a play-free electronic switching cam encoder (abbreviated to: NOCN) with two (At version 79 four) galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. An absolute mulitturn encoder with CANopen interface, adjustable parameters and an electronic switching cam module is realized in the compact housing. A separate controller unit monitors the function of the cams. The encoder's CANopen position signal and the switching outputs can be parameterised separately. The parameterisation (cam limits, resolution, measuring range a.s.o.) has to be verified to the NOCN via a checksum. This checksum can be calculated by a TWK program or the standard algorithm recommended by the CiA. After verification the device can be set operational.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCN) with a maximum of four galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with CANopen interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The encoder's CANopen position signal and the switching outputs can be parameterised separately. Parameterisation is carried out via the relevant CANopen objects in accordance with the encoder profile according to CiA, DS 406, revision 4.01. The NOCN has a fault monitoring system which outputs a fault message via the CANopen bus (emergency message) on detection of a fault.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCA) with a maximum of four galvanically separated switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the relevant position of the drive shaft. A parameterisable multiturn absolute encoder with analogue interface plus the switching cam encoder printed circuit board with separate controller are integrated into the compact housing. The analogue signal and switching outputs can be parameterised separately using multifunction pins (MFP and PRE) in the connector.

This involves a play-free electronic switching cam encoder (abbreviated to: NOCE) with a maximum of four galvanically separated SIL2 switching outputs that can be set by the customer, and which are activated or deactivated depending on the respective position of the drive shaft. A parameterisable multiturn absolute encoder with SSI interface and the switching cam encoder PCB with separate controller are integrated in the compact housing. The SSI interface can be preset, the encoding direction is adjustable and the switching outputs can be preset. A special shaft design appropriate to the play-compensating measurement gear ZRS is available. The supply voltage, SSI signal and switching contacts are each galvanically separated from one another.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The 1B-222 series of compression latches offers high resistance to vibrations with the over-center action and an insert locking device. It is designed with IP65 protection and can provide a maximum compression of up to 6 mm. Care must be exercised in a small number of extreme vibration conditions where this model's specifications might be insufficient to the task.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. This swing handle has a push button for rod or cam control and an IP-65 sealing system. For unblocking the handle, the push button is first unlocked with the round cylinder. Additional locking is possible with a padlock, and the swing handle protects against vandalism with its enclosed control function. Its application range includes both indoor and outdoor cabinets.

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. Compression latch with handle and fixed or adjustable cam heightQuarter turns, Compression latches, Heavy duty latches for big door gauges

Bright chrome-plated ZDC housing and insert, white zinc-plated steel cam,Head Diameter Ø22,Door Cutout: Ø19.5*16.5mm,Easy Installation,ROHS compliance

Blue gray powder coated ( RAL 7012 ) ZDC housing,PA handle,Padlockable,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Zinc Alloy and PA6 versions available,Key Alike and Key Different available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance

Bright Chrome plate Zinc Alloy Quarter-Turn Lock,different Insert Type available,LH/RH available,Head Diameter Ø28,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance