Cables - accessories - Import export

CSN® copper and nickel are temperatureresistant connecting cables for internal wiring of electric household appliances such as hotplates, glass ceramic plates, grill appliances or storage heaters. In industrial applications CSN® Cables are preferably used for the wiring of heating elements, heating cartridges, tubular heaters, panel heaters, and quartz radiators. We manufacture these singlecore cables in cross sections up to 6 mm². Owing to their high temperature resistance up to 250 °C in the case of glass silk insulation and 600 °C in the case of mineral fibre insulation, these connecting cables meet the most demanding requirements.

Around installation technology, cable clamps for the fastening of HF cables to telecommunication masts are our speciality. These cable clamps consist of a C frame including retaining feet (for installation on to a C-profile or flat bar) and a fastening screw with grouted thrust washer. In addition, the corresponding number of cable trays (inlays) are supplied. C frame The C frames are stamped bent parts which – depending on their size – have lateral pieces to provide rigidity and stability. The fixing screws have a uniform hexagon head. Due to the construction and material selection, after tightening, a secure hold is ensured even without a lock nut. A torque of 1.5 Nm is recommended here. Installation to flat bars is possible up to a material thickness of 9.3 mm. Inlay The cable troughs are chamfered for side installation or simple setting into the C frame. The wide overlap protects against falling through before tightening the fastening screw.

We offer the full range of components needed to build a complete fieldbus network, such as fieldbus cables, repeaters and many accessories. This includes bus and supply cables, passive and active junction boxes, power supplies, cabinet receptacles and receptacles. Field-wireable connectors and terminating resistors round off the product line.

PMA cable protection systems are used wherever the mechanical protection of electrical lines and cables is needed. Highly flexible cable protection tubes are specifically suited for the additional protection of cable guides in e-chain® systems. Due to the combination of technical knowhow and the strictest international safety guidelines, PMA fulfils the worldwide requirements of industrial markets in application areas like mechanical engineering, automotive construction, fiber optics, solar systems as well as applications in the robot sector with high speeds and millions of alternate bending cycles.

Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s Other information E3.10 Inner height hi: 10 mm Inner widths Bi: 20 - 60 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®. E3.15 Inner height hi: 15 mm Inner widths Bi: 20 - 60 mm bending radii R: 32 - 75 mm Pitch: 16,7 mm E-Chain®. E3.22 Inner height hi: 22 mm Inner widths Bi: 20 - 60 mm bending radii R: 44 - 75 mm Pitch: 16,7 mm E-Chain®. E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Opening and closing of the E-Chain®. Interior separation and strain reliefs. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E3 system E3: System for highly dynamic applications The cycle times are always shorter in the automation, whereas the requirements in noise reduction, service life, vibration dampening are always higher. For this wide area of small E-Chain®, igus® now introduces the E3 system product range that completely caters to these requirements: Extremely low noise operation (max. 38 dB(A)). The resilient element replaces pins and bores as fastener Modular chain made of three elements Cost-efficient crossbar and separator "on the band" Quicker and easier access to cables by the zipper system Good stability through stable, interlocked links Easy to shorten or lengthen Ideal for flat cables Accessories: Separators, integrated strain reliefs, mounting brackets Typical industrial sectors and applications Production and processing of semiconductors Optics Automatic insertion machines Materials handling technology Measuring technology Printer and plotter Clean room application General mechanical engineering iF -Design Award 2005 IPA classification - Report IG0704-400:: ISO Class 1, according to DIN EN ISO 14644-1 for system E3, Series E3.15.040.075.0 at v = 0,5 m/s, 1 m/s, 2 m/s

With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.

Flexible media trolley for e.g. video conferences. With universal VESA mount, integrated cable management and compartments for accessories. • Flexible media trolley for video conferences and presentations in small groups • Safe when in motion and stable when in use thanks to 75 mm rollers with brakes • Mobile and easy to use thanks to comfortable handles and cable holder in the profile frame • Integrated cable management in the aluminium profile frame • High-quality glued CDF body with multiple openings for cable management and heat extraction • Upper compartment for storing small devices such as remote control, mouse, keyboard, etc. • Compartment with grip hole for a mini PC • Lower compartment for additional hardware accessories such as batteries, 3-socket power strip, etc. • Cable outlets in the back of the frame to reach a power socket, at the sides for connecting to a laptop and at the bottom at the front for a charging cable • Monitor/TV can be adjusted in height during assembly