Bolts and nuts - Import export

stainless steel*internal thread M 10*Ø 12 mm

As a specialist for special parts, we are your competent partner for high-quality fasteners: made of any special materials according to drawing to specification / factory standard according to special standard (for example DIN 2510) according to technical regulations (eg AD-W2, AD-W7, AD-W10, TRD 106, etc.) with all acceptances and double approvals (for example, works certificate 2.1, works certificate 2.2, acceptance test certificate, 3.1, acceptance test certificate 3.2, TÜV, Germanischer Lloyd, etc.)

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides

Drop-forgings of carbon and alloyed steel, nickel, duplex, titanium and superalloys like Monel® or Hastelloy®, Inconel®, Incoloy® for pressurized components like forged valves or valve parts like bodies and yokes or bonnets, flanges for boiler systems, fittings for piping, non-corroding parts for shipbuilding, marine technology, slings and lifting gear, hooks, eyebolts, nuts, chain links, military vehicles, transportation and defense. Every nut, bolt, and screw - forgings for harsh environments: forged valve bodies, bonnets, yokes and flanges, pipe connections, pressure applications like boiler parts, hoists, chain links, eyebolts, hydraulic components, corrosion and acid-resistant parts for chemical and fertilizer industries, as well as shipbuilding and drill equipment. Pressure equipment and nuclear power (valves, boilers, piping): PED 2014/68/EU, AD 2000-W0, ASME/ASTM, KTA, RCC-M Shipbuilding and maritime industry ABS, BV Marine & Offshore, DNV, LR Shipping, ClassNK

Countersunk bolts acc. to DIN 604 with nut galvanized surface

This reinforced, stainless steel anchorage point (Ø 16 mm) comes with a special supporting tube (Ø 42 mm) and includes an angular plate for lateral installation. Simply drill 2 holes through a load-bearing beam to install it. Our standard package includes threaded bolts and nuts for countering. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Designed for load-bearing wooden structures Minimum beam dimensions: 100 mm x 200 mm Incl. stainless steel installation set

Install the base plate (200 x 200 mm) of this stainless steel anchorage point (Ø 16 mm) on a load-bearing steel structure and then counter it using 4 stainless steel bolts. This anchor has been awarded national technical approval by the German Institute for Construction Technology ("DIBt"). The bolts and counter nuts required are included in the package. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Incl. stainless steel installation set Upgrade with a supporting tube for usage as an end or corner support in a lifeline system

This stainless steel anchorage point (Ø 16 mm) for steel surfaces is reinforced through a special supporting tube (Ø 42 mm). You can either use it as a single anchorage point or integrate it into a lifeline system. It is installed laterally using the angular plate supplied and then countered using 2 threaded bolts and corresponding nuts. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Installation materials included

This stainless steel anchorage point (Ø 16 mm) - specially designed for wooden surfaces - is attached to a load-bearing beam and accordingly countered. The anchor can be installed laterally using the angular plate supplied. Our standard package also includes 2 threaded bolts and matching nuts. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation 2-hole system for flexible installation For load-bearing wooden structures Minimum beam dimensions: 100 mm x 120 mm Incl. stainless steel installation set

mechanical belt connectors for use with most PVC, rubber and steel elevator belts, e.g. Supergrip belt connectors Easy to install system with 50 mm segment widths Four versions for up to 1,250 kN/m without limiting belt strength Max. temperature 80ºC, lock nut with nylon insert (standard) Type BC belt connector for steel mesh belts Four versions for up to 2,500 kN/m belt tensile force Maximum stability using high load bolts with self locking nuts Top quality construction in steel and extruded aluminium

The BestFlex Roller is excellent for handling oddshaped boxes, bags and lowgrade cartons in low to medium volume applications. Designed to expand, contract and move easily, the BestFlex Roller is a selftracking, gravity roller conveyor that has a per linear foot capacity of 220Kg per linear metre. The allsteel frame construction provides unmatched structural integrity, whether the conveyor is extended, contracted or configured in simple or compound curves. It is the best choice for moving items without a flat, solid surface. SelfTracking Cartons follow the path of the conveyor without using engineered curves. Adjustable Height Telescopic leg sections are used to raise or lower the conveyor height. Square Tubing Legs Heavyduty square tubing legs offer longer service life and stability. 40mm Side Plate Aluminium alloy construction features a ribbed design for added strength. Assembled with bolts and locking nuts. Castors with Brakes 127mm x 38mm Swivel Castors allow easy movement.

Already the standard spectrometer configuration allows you to analysis: - automotive parts, such as bolt, nuts, and design parts etc. - electrical components & parts, such as PCB, connectors etc. - jewellery The advanced collimator design and the used cost-effective proportional counter detector enable high speed measurement over a wide thickness range as used in (multi-) layer structures such as automotive parts, electronic parts and components. Furthermore, the following functions realize an easy and efficient measurement: A new autofocus & auto approach function allows to focus automatically and ensure safe and rapid measurement with a greatly enhanced high level of easy operability. Using this function also enables to focus and to measure even if the samples show large variations in height, without adjusting height at same measurement condition. An optional wide view CCD camera allows positioning and multi-point measurement easily over a larger sample area. This spectromet