Blasting cabinets - Import export

Beam machine for irradiating a glass sheet conveyor belt Transport device supporting roller guide, motor nozzle movement, infinitely variable, attached dust filter system and electronic Control. Max. Lens height for automatically rays 1.200 mm Max. Lens height for manually rays 1.500 mm

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.

The injector-glass-blasting cabin is operated by hand with a gun. A blast-collecting collector ensures a smooth blasting circuit within the system. With the help of roller rails, as well as through-slots (on the side and in the roof surface with special brushes against the penetration of dust), surface treatment of glass panes is easy. On the front side there is an easy-open loading door for radiating hollow glass bodies. A work grate and two shock-proof long-field lamps (for glare-free illumination of the blasting chamber) guarantee a smooth workflow. The foot switch as well as the drain cup on the blasting agent funnel, an attached control box with pressure reducing valve and pressure gauge, motor protection switch, on / off button, solenoid valve, control lights, switches for interior lighting, main switch, emergency stop switch and support control ensure uncomplicated operation.

The housing is made of folded stable sheet steel and welded. In the cabins 2 workports with built-in rubber sleeves (easily exchangeable) are incorporated. The cabin is equipped with a blast hose, nozzle holder and nozzle 1 made of hard metal. For the different requirements are made of hard metal nozzle with a diameter of 0.8 mm, 1.0 mm or 1.2 mm for selection. All blasting medium-pressure vessel (1 - 3 Tank System) have a volume of 2 kg and provided with a closure cap. In all systems, a pressure reducing valve and a pressure gauge for setting a constant jet pressure, and compressed air supply are fitted with plug-in nipple. All systems are equipped with a pneumatic foot switch for turning on and displaying the blasting process.

This is the ideal piece of equipment for blasting small and even smaller surfaces of glass and metal for matting, fettling, cleaning, polishing and drilling. All mineral media such as corundum, glass beads, cullet, silicium, walnut and plastic granules in the grain size range of 0 - 300 μ can be used as blasting agents. There is a selection of hard metal nozzles with a diameter of 0.8 mm and 1.0 - 1.2 mm as well as 1.5 mm for various requirements.

WIWOX® DI-EU injector blasting cabinets are designed for use in production and maintenance. Ready for use equipped with integrated cartridge filter and abrasive recovery system. Economical operation with fine-grained abrasives with low air consumption of approx. 800 l/min. at 6 bar blasting pressure. The blasting media is continuously sucked out of the cabinet by a constant negative pressure and separated from dirt and dust in a downstream cyclone. A cyclone screen (possibly with ring magnet) collects coarse impurities. In this way, only clean abrasive remains in circulation. The used abrasive, dust and small impurities are led through the cartridge filter chamber to the dust collecting bucket.

WIWOX® DP-BB blast cabinets with combined blasting and blow-off function (Blast´n´blow®) and ex-protection accord. to 1999/92/EC for paint stripping and surface decoating in seconds. Fine organic blasting media get shot onto the workpiece by compressed air, whereby even stubborn thick layers are loosened in shortest time by the effect of the soft, but sharp-edged granulates. Even sensitive tool surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

WIWOX® MT micro blasters are used for precise blasting with blasting nozzles from 0.4 – 1.8 mm. Surfaces can be smoothed, matted, deburred or cleaned. All mineral media, e.g. glass beads, broken glass, corundum, silicon carbide in the grain size range from 0 to 300 mμ serve as blasting media. The abrasive is used only once. The blasted surface is reproducible. Only a compressed air connection is required to operate the equipment. Micro-Tip fine blast units are suitable as portable free blast units or in combination with a blast cabinet. Micro-Tip fine blasting technology is available as a pressure or injector process. All units are equipped with foot pedal, pressure regulator, manometer and carbide nozzles.

The AQUA BLAST wet blasting cabinet is a combination system for degreasing and simultaneous gentle beams of various workpieces. The water - jet mixture is housed in the cabin swamp. This abrasive mixture is sucked in via a novel centrifugal pump of wear-resistant polyurethane. At the jet of compressed air is additionally adjustable added so as to achieve an optimum surface finish. After loading of the workpiece, the blasting medium mixture flows back into the cabin sump and is thus an abrasive circuit ensured. Battered fine abrasive is suspended from the cab sump and fed to a band filter on the cabin back.

Our model "Super-Glasmatic" is particularly characterized by a compact, Compact design, simple operation, low material consumption, optimum use of space, highly effective dedusting, rational workmanship, environmentally friendly operation without dust pollution and adjustable material consumption. Housing with 2 mm steel plate, with complete blasting agent recovery, with drain cup for quickest change of blasting agent, with interior lighting of the blasting chamber, with brush slots at the front, approx. 600 mm long for optimum processing of the glass objects, with 3 brush slots on the side and at the top for problem-free penetration of the parts to be irradiated, With sliding blades at the sides for dust-tight closing of the booth during the blasting process, with standard beam head and spray gun with hand lever, with all necessary compressed air and blasting hoses, with large plexiglass door (750 x 400 mm) for optimum visibility Filter system (residual emission <5 mg / m³).

DSK-Eco series in stable steel plate design with attached dust filter system and automatic blasting agent circulation. Our model DSK-Eco is characterized by its elegant design, simple operation, low material consumption, highly effective dedusting, rational operation. The models of the DSK-Eco range have a large, top-opening sectional door. A blasting medium circuit without any additional device is made possible by the built-in blasting device. A nozzle holder with a continuous jet nozzle, as well as a working grate in the system guarantee an extremely uncomplicated operation. A glare-proof Goliat lamp, exposed to the outside, illuminates the entire work area glare-free. A blasting cyclone recovery unit is used to classify the blasting agent. Efficient pressure-beam cabin of the DSK-Eco series. Direct from manufacturer, MADE IN GERMANY. We adapt the cabin to your needs.

The Modellrange ECONOMIC is made of durable sheet steel. It comes with adjustable media consumption, a blast media collection bin and a sieve to separate blast media from contaminations. The cabinet has two lateral openings with sealing sliders for rod materials. A perforated metal plate with enforcements. The system has a sectional door that opens the complete workspace. The Cabinet comes with a door-safety switch, two large operation holes with multiple rubber Sealings. Monitoring window, sized 400x500 mm, with easy changeable glass/safety-glass panes, as well as 2 durable pneumatic springs. Energy Saving Lamp, attached from outside. Injector-type blast head, with air- and blast nozzle made of hardened steel. The system comes with all necessary compressed air and blast media hoses, oil-water separator, manometer, an electrical magnet valve and a foot switch. On/Off switch, dust filter system 0,55 kW, intermediate pressure turbine. Dust collection bag.