Blades for saws and cutting machines - Import export

Our narrow bandsaw blades are produced in coils and ready for use. Here, we use the most common tooth form in the wood industry NV. We sell the narrow bandsaw blades as: toothed, toothed and set, toothed, set and sharpened. We offer the following pitches: 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 12 mm Below you can find the standard and semi-standard production program. (We can also produce other sizes. In this case, please contact us directly.) Standard (mm) Semistandard (mm) 10 x 0,6 10 x 0,4 | 10 x 0,5 10 x 0,6 12 x 0,4 | 12 x 0,5 15 x 0,6 15 x 0,4 | 15 x 0,5 | 15 x 0,7 20 x 0,7 20 x 0,4 | 20 x 0,5 | 20 x 0,6 25 x 0,7 25 x 0,4 | 25 x 0,5 | 25 x 0,6 | 25 x 0,8 30 x 0,7 30 x 0,6 | 30 x 0,8 35 x 0,8 – 40 x 0,8 –

Our bandsaw blades for mobile sawmills are available as coils and ready for use. We can supply the standard teeth W2-22 mm and W1-22mm. On request we can also provide the tooth W-19 mm and W-25 mm. We sell these bandsaws as: - toothed, - toothed, set and sharpened, - toothed, set, sharpened and hardened.

Production of bandsaw blades between 50 mm and 311 mm width. Available in the following styles: - toothed - welded - straightened and tensioned - swaged - set - stellite tipped Steel Qualities: - CR-100 swedish - CR-200 extra - CR-300 special - CR-400 PREMIUM - CR-400 Xtreme Coils: Available in both coils (10mm - 311mm) or finished saws (50mm - 311mm), bandsaw blades can be produced as single-sided or double-sided. Blades are also available with variable pitched teeth or with winter teeth.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

REVOLVING CROSS CUT SAW WITH NC PROGRAMMING SYSTEM GAMA 65 K3 Fully automatic circular saw for positioning and controlling via touchscreen with length measuring system EXENSO COMFORT (Pusher system) Application Length stop system (pusher operation), revolving table and sawblade inclination via servo - motor for positioning ( cross cut, mitre cut or compound mitre cut) of heavy workpieces, i.e. carpenter industry, gluelam industry, log house industry, wooden frame work, solid wood, etc. Technical Equipment : - Motor rating 8,1 kW / 400 Vac-50Hz, star / delta start, direct driven - Motor speed 3.000 rpm - Electrical sawblade inclination 90-30° via servo motor - Laser light for cross cutting - Sawblade height at 90° / 245 mm – 45° / 164 mm – 30° / 113 mm - TCT – sawblade 650 x 30 x T 54 - Dust extraction spigot 125 / 80 mm - Revolving table 20° - 160° - Horizontal material clamping system, right - left - pneumatische Kappvorrichtung über ZweihandSteuerung/vollautomatisch

AVOLA stone cutting saws have a distortion-resistant machine frame and a precise cutting wheel bearing. Amply dimensioned ball tracks provide exact and smooth guiding of the table which can be tilted by 45° to the left. The material is cut easily and exactly under the mobile cutting wheel. Special table designs can be supplied on demand at extra cost. AVOLA stone cutting saws are equipped with powerful motors. Motors can be wound for other voltages and frequencies at extra cost. The various materials used in the refractory industry require special machining methods. Although wet operation has become more and more important over the past years, dry cutting is in many cases the only method to be considered for cutting certain materials.

Excellent cuticle nippers 13cm, cutting edge 15mm is used to remove cuticles. It is suitable for manicure as well as pedicure.cuticle nippers are special nippers and especially suitable for professional use in the pedicure field.

Excellent corner nippers 13 cm, cutting edge towering pointed is due to the fine tip not only perfectly suitable for shortening toenails, but also for difficult to reach places. The corner nipper has been specially developed for ingrown toenails.corner nipper slim, box joint, i.e. both basins (halves) are inseparably connected, which makes the nipper even more durable. The corner nipper was especially developed for "problematic" toenails that grow into corners and are difficult to access. The corner nipper cuts even the hardest nails cleanly and with little force.

This nail nipper is particularly suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Head Cutter 14 cm Cutting edge long 23.0mm, similar to a nail clipper, has a slightly curved cutting surface that resembles the shape of a toenail. Can also be used perfectly as a corner nipper. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Cuticle Nippers 13.5 cm according to Winkler, cutting edge 7 mm is used to remove cuticles. It is suitable for both manicure and pedicure. Skin nippers are used to remove skin residue from nails. Cuticle nippers are special nippers and particularly suitable for professional use in the foot care sector.

This nail nipper is particularly suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Nail Nippers 13 cm is a small nail nipper with curved cutting edge. It lies well in the hand and is very similar to a classic corner nipper. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Head Cutter 14 cm Cutting edge short 18 mm has a slightly curved cutting surface similar to a nail clipper, which resembles the shape of a toenail. Can also be used perfectly as a corner nipper. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent Corner Nippers 11.5 cm Cutting edge super slim is not only perfect for shortening toenails because of the fine tip, but also for difficult to reach places. The corner nipper has been specially developed for ingrown toenails.corner nipper slim, box joint, i.e. both basins (halves) are inseparably connected, which makes the nipper even more durable. The corner nipper was especially developed for "problematic" toenails that grow into corners and are difficult to access. The corner nipper cuts even the hardest nails cleanly and with little force. Related links to "Excellent corner pliers 11.5 cm c

Excellent Cuticle Nippers 11 cm, cutting edge 7 mm is used to remove cuticles. It is suitable for both manicure and pedicure. Skin nippers are used to remove skin residue from nails. Cuticle nippers are special nippers and particularly suitable for professional use in the foot care sector.

Excellent nail nippers 13 cm, cutting edge light version has a cutting edge which is based on the natural nail course. The light version is suitable for normal thick toenails. This nail nipper is especially suitable for cutting corner nails or ingrown nails due to its straight cutting edge. Due to the double cross spring, even harder toenails can be cut with little effort.

Excellent claw nippers, also called tip cutters, are often used to shorten gel nails.