Results for
SCHAKE GMBH
Germany
as barrier around construction sites, mobile fence pre-galvanized, with tubular frame all around, vertical tubes Ø 42.4 mm, horizontal tubes Ø 26.9 mm, mesh size: vertical: 100 mm, horizontal: 300 mm, wire size vertical: 3.4 mm, wire size horizontal: 3.8 mm, 33 vertical wires, 5 horizontal wires, projecting wire ends as climb-over protection, easy handling, appropriate quality
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
thickness 8 mm*ground surface*M 10 threaded*adjustable foot*rubber feet
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
CNC machining parts.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the base parts used in construction.
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
steel*thickness 8 mm*powdercoated*M 10 threaded*rubber feet
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
Suction Cup for additional stability for Usbeck Burners
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
steel*powdercoated*for rods up to 13 mm Ø
Request for a quoteSCHULZ STANZTECHNIK GMBH
Germany
Design and construction This Schulz ball caster / ball transfer unit consists of a casing, a top cover and a bearing cap as solid turned parts, a base flange, a bearing ball and several support balls. Dimensions The spacing is calculated by dividing the shortest edge length of the object to be transported by 3.5.
Request for a quoteFRIEDR. FREEK GMBH
Germany
IBC/A-Container Base Heaters are used for the heating of bag-in-box containers. It's a silicone heater mat that is placed below the bag before that is filled. For a faster warming, an additional unheated insulating sheath covering the four sides and the HILC unheated insulated lid can be used. The IBC/Bpro-Container heating jacket as well as the HILC unheated insulated lid are perfect means to support the IBC/A base heater. Using the base heater together with the heating jacket and the insulation cover accelerates the heating process and to reduces heat losses.
Request for a quoteGSW SCHWABE AG
Germany
For widths from 200 to 500 mm Pass line height 850 to 1,200 mm the base systems can be simply married with the tslots of the belt body the Base System 51.2 is mounted on one side only and supports widths of up to 150 mm; due to its very large floor plate, one base is usually enough the Base System 53.1 is mounted left and right of the belt body and thus suitable for wide units; since the mounting feet are relatively small, two bases are recommended
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
steel*powdercoated*for rods up to 13 mm Ø
Request for a quoteRK ROSE+KRIEGER GMBH
Germany
Connecting tubes which have been cut to size can be connected to one another using ITAS tube connectors made of cast aluminium via a simple plug-in principle. No further mechanical processing is necessary, which reduces assembly costs to a minimum. An internal clamping mechanism and the tightening of the special clamping screws guarantee a positive connection with smooth transitions, which are pleasant to the touch and also ensure enhanced safety – injuries due to getting caught up are an impossibility. The result is a simple and stable system which fulfils all safety guidelines.
Request for a quoteCARL FRIEDRICH USBECK KG
Germany
zinc diecasting*and brass,*nickel plated*vinyl coated jaws*length 300 mm*safety base*Ø 82 mm
Request for a quoteVOLFI VOLKER FISCHER GMBH
Germany
Our classic product in countless variations. With or without a 2 mm base plate. For easy, systematic slab laying on solid/ level substrates.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.
Request for a quoteAGOFORM GMBH AUGUST OTTENSMEYER
Germany
AGO-Protect AGO-Protect is the innovative and clean way of protecting your base unit. Any liquids that have run out are captured by the special design and the base unit is protected against damage from moisture or cleaning agents at the same time. AGO-Protect is easy to remove from the base unit for cleaning purposes. The continuous edge means that even larger quantities of liquid can be reliably collected. In this way more extensive damage can be avoided.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG
Germany
From the Idea to Prototyping to Series Production and Evolution – MicroControl plans, develops and manufactures individual solutions. MicroControl experts will work in close liaison with the customer to realize hardware and software for the desired application. In a following step, a prototype will be developed and manufactured – either by the customer or MicroControl. In the conceptual stage, the required technical specifications of the customer’s application are checked continually.
Request for a quoteK-DESIGN GROSSSCHIRME & WINDSCHUTZ GMBH
Germany
For all sunshade models For permanent installation, each sunshade can also be delivered with an encasable base (2-part). The size of the foundation depends on the sunshade model. The advantage: it saves space and you can remove the upper part by undoing only four screws. Then everything is open and there are no tripping hazards. The models ParaQueen, PyraMax and ParaKing also require a hinged joint.This is an enormous help in putting up and taking down the sunshade in a controlled manner. A level position is still guaranteed when removing the hinged joint. Panel Base For all sunshade models The sunshades can be put up anywhere with this mobile bevelled base. Concrete slabs in the recesses of the base ensure sturdy support. The base is bevelled to avoid hazardous edges for staff and customers. The panel base has the following dimensions: 970 x 970 x 50 mm. With our special King-base you are on the safe side. Our specially treated heavy base is made of 3 mm heat-treated galvanized ste
Request for a quoteCBG COMPOSITES GMBH
Germany
Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product
Request for a quoteCBG COMPOSITES GMBH
Germany
Water-based one-component fire protection impregnation for wood and wood products and building elements with antibacterial and fungicidal properties for interior and exterior use — antibacterial, with fungicidal effect — inorganic — non-combustible — non-toxic — temperature resistant (after drying out) — environmentally safe — high adhesive properties
Request for a quoteCBG COMPOSITES GMBH
Germany
Low-viscosity, water based, one-component non-combustible adhesive with endothermic effect, made of natural components, mainly rock formations and basalt microfiber. Cerammatrix 01-50 is used to bond products made of mineral fibers (basalt, carbon, glass) as well as mineral wool and/or metals. — 100% natural origin — inorganic and antibacterial — non-combustible — no smoke or fuses in case of fire — high temperature resistant (after drying) — safe for people and environment — high adhesive properties — moisture-resistant — water resistant after special treatment of the finished product
Request for a quoteSIEMPELKAMP MASCHINENFABRIK GMBH
Germany
The knives of knife-ring akers have to be sharpened and re-set at regular intervals. This can be a very timeconsuming and personnel-intensive job. The quality and precision of these tasks depend strongly on the accuracy and dedication of the individual worker. With the sharpening and setting robot PZSE the knives can be sharpened and set automatically. Features, Function safety housing fully automatic process ow transport to and clamping of the knife ring to the carrier disc determining the wear of all parts automatic readjustment of all wear shoes and knives sharpening of all knives in a wet grinding process cleaning torque control of clamping bolts detection of possible damage to the threads Advantages automatic sharpening and setting process setting of the knives with high accuracy electronic control of tightening torque of the knife xing bolts automatic monitoring of the thread quality of the xing bolts preventative maintenance program thanks to PLC-controlled integrated
Request for a quoteResults for
Bases - Import exportNumber of results
35 ProductsCompany type