Automatic doors - Import export

Cost-efficient transport between floors The vehicle lift CARRICO is an interesting alternative to the TRAFFICO when lower lifting heights and less frequent use are needed. The CARRICO has been type-tested in accordance with the EU Machinery Directive 2006/42/EC. The conveying speed is limited to 0.15 m/s. Furthermore, this car lift is delivered with automatic sliding doors and cabin equipment designed for the transport of vehicles and passengers. Functions of the components Door type: automatic sliding door (depending on the cabin width - 4- or 6-leaf) Entrances: front only / through Control: Control unit with micro-processor with extensive control functions Drive: Submersible hydraulic unit incl. screw spindle pump Advantages Saves on construction space as no ramp required Especially suitable for narrow shafts Cost-effective way to transport cars Easy to operate, manual hinged doors

Pallet based automated car parking system RESPACE Pallet based technology The pallet based automated car parking system RESPACE is an interesting solution for creating up to 50 parking spaces. Drivers park their car on a pallet in a cabin. The cabin is the only interface between the driver and the car park. From this point everything is automatic. The door of the cabin closes and the car is transported downwards by lift. From there the car standing on the pallet is brought to a free parking space via roller conveyors. The pallet based parking system RESPACE is characterized by a very compact design. From the lift the pallets with the vehicles are moved directly to adjacent parking spaces. Car parking and removal follows according the puzzle principle. The car park has 60 parking spaces and is used as a hotel car parking, but also available to the public.

E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Other information Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0 E2 micro E-Chains® are very small, one-piece and two-piece (B07/B09) E-Chains® with a low weight and therefore ideal for highly dynamic applications. E2 micro E-Chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options. "UPGrades" of the snap-open versions are available for many types; they are interchangeable among themselves and can thus be used as, among others, spare parts pack for new installation options. Series 03 Inner height hi: 5 mm Inner widths Bi: 5 - 10 mm bending radii R: 10 - 28 mm Pitch: 10 mm E-Chain®, not-to-be-opened Series 04 Inner height hi: 7 mm Inner widths Bi: 7 - 30 mm bending radii R: 15 - 48 mm Pitch: 16,7 mm E-Chain®, not-to-be-opened Series 045 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, not-to-be-opened Series 05 Inner height hi: 10 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 06 Inner height hi: 10,5 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series 08 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 25 - 48 mm Pitch: 20 mm E-Chain®, not-to-be-opened Series B07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series B09 Inner height hi: 14,3 mm Inner widths Bi: 16 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series 074 Inner height hi: 10.9 mm Inner widths Bi: 10 - 40 mm bending radii R: 18 - 38 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series 094 Inner height hi: 14,3 mm Inner widths Bi: 10 - 40 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, snap-open along the inner radius Series E2.10, openable along the outside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 10, openable on the inside Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 10, closed Inner height hi: 10 mm Inner widths Bi: 6 - 50 mm bending radii R: 10 - 38 mm Pitch: 20 mm e-chain®, closed Series E2.15, openable along the outside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open outside Series E2i. 15, openable on the inside Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm e-chain®, snap-open inside Serie E2C. 15, closed Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 75 mm Pitch: 20 mm e-chain®, closed E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the E2 micro E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors. E2 micro For restricted spaces One and two-piece E-Chains®, from 5 mm inner height High torsion resistance Smallest inner heights and bending radii Mounting brackets with strain relief optional Small pitch for silent operation Cable-friendly interior Low weight Large pins for a long service life Favorable internal/external dimensions ratio B07/B09 in two parts - Can be folded out in outer radius due to integral hinges Typical industrial sectors and applications General construction machinery Models (micro E-Chain®), Automatic doors Vehicles Measuring machines Electronics Handling systems Pick and place robot iF-Design-Award for E2 micro Series 05 Clean room test on request Special design: Electrically conductive ESD/Atex versions on request UL94-V0 classification for Series 03 and Series 14 (more on request) 42 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 06.10.038.0

Fits any style cabinet door Strong magnetic force Plastic parts surface to avoid corrosion Prevents the cabinet or cupboard doors from hitting the wall while opening Easy installation Fasteners could be provided

-sturdy steel construction with smooth interior walls -trap door operated by cable from the driver’s seat -rubber cushioning to lessen the impact when the trap door is opened -trap door closes automatically when the container is set down on the ground -can be secured to prevent slipping and unintentional trap door operation -suitable for forklift truck and crane -100 mm ground leeway, suitable for pallet truck -with 4 crane eyes Ø 40 mm -can be stacked (3 units) -spray painted or hot-dip galvanized -Volume (approx.) in m³: 0,5 / 0,75 / 1,0 / 1,5 / 2,0 -Load capacity in kg: 1000 -2000 kg Accessories -2 swivel + 2 fixed polyamide castors Ø 180 mm, one swivel castor with brake - construction height 220 mm -galvanized lid, can be opened from both sides -trap door with galvanized guiding plates