Anodised aluminium - Import export

drylin® SHT-12 linear module, drylin® R hard-anodised aluminium shafts, Trapezoidal lead screw TR10x2 made of stainless steel with ball bearings, machined lead screw ends 6h9x17mm, quad blocks, aluminium shaft end support, stroke lengths in 250mm or 500mm. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® SLW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, ball bearing Trapezoidal lead screw TR10x2 made of stainless steel, lead screw end machined 6h9x17mm, guide carriage in 100mm length, shaft end support made of anodised aluminium. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is very light and is suitable for the simultaneous conducting of supply cables. The mounting options are highly variable, among others, using slot nuts; installation size 20 can also combined with all 20/20 aluminium construction profiles. 1. Profile made of hard-anodized aluminum 2. Main body of the carriage made of aluminum 3. Customized clearance adjustment 4. Cover made of solid plastic 5. Gliding elements in high-performance polymer iglidur® J serve as a guide bearing and guarantee optimum running properties drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis

Based on proven coil anodizing technology from our B57S® product, B73A can be used for shelving, furniture, medical and domestic appliances and many other applications. The surface of Novelis B73A is industrially pre-treated and coil anodised in a continuous process. This ensures a consistent high quality and is therefore the most cost-effective solution for the customer. B73A offers customised solutions with different functional and decorative requirements for the electronic, domestic appliances and chemical industries*. Our delivery program offers a wide product range, including a variety of colours and standard coating thicknesses. Standards are available in 1 ton lots on a short delivery time. *Please note: Due to the hardness of the anodic film, crazing can occur during extreme bending or forming. To minimise the effect more information is available on request.

The consistent high quality of B57S makes it an excellent choice of anodising quality aluminum. It is designed for many different applications including electronic covers, in the transport and automotive industries, road and advertising signs and equipment housings. Your selection of material is of utmost importance. Finding a high quality product, with a good price/performance ratio, B57S will meet your needs. B57S can easily be cut, drilled, punched, edge-flanged and formed. Welding and brazing should be avoided in visible areas, because the localized heating of the metal will change its structure and affect the anodized finish.

CEE floor box 6522A with a housing made of stainless steel and a lockable lid made of anodised aluminum. Lid closes watertight. Degree of protection IP 65. Other configurations on request.

Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”.

Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.

A high quality whiteboard made of white enamelled steel. The robust whiteboard is durable and ideal for frequent use. The inscription board is designed with anodised aluminium Softline profiles. Grey plastic corner pieces round off the edges. You can use the storage strip at the front to store writing tools or magnets. Select the whiteboard with or without printing. The whiteboard is also available in many different sizes.

A showcase in a class of its own that sets standards in quality and functionality. High-quality processed and anodised aluminium profiles or, on request, powder-coated in RAL colours. Single-pane safety glass, permanent ventilation, scratch-resistant and magnetic rear wall in aluminium silver, vandalism safety locks with patented frost protection and gas pressure springs with secure 85° open position, optional LED lighting - the TN series leaves nothing to be desired. Whether as a wall or floor model, in foyers or in front of buildings. And everything with ten years warranty!

Flag pole extendable to 4 lengths (approx. 1800 mm, 2900 mm, 3900 mm and 5000 mm), with a crossbar (1200 mm) in anodised aluminium. The large plastic base (790 x 790 x 220 mm (W x H x D)) can be filled with 70 l of water or sand for added stability. Incl. 2 carry bags for pole and base. When the pole is fully extended a flag of up to 1100 x 4000 mm (W x H) with loop can be attached.Delivery excludes flag

This information stand has a total height of approx. 1800 mm. Due to its size, this stand is excellently perceived by people and visitors. As a pavement sign, it also draws the attention of passers by to your advertising message from both directions. We use only high quality materials for this poster stand. The base frame and click frame on both sides are made of silver anodised aluminium with chrome coloured rounded corners. The aluminium click frames are equipped with polystyrene back panels and anti-reflective and UV stabilised covers to protect the posters. The UV stabilisation prevents the posters from fading and the anti-reflective coating improves the legibility of the inserts without light reflection. The snap technology of the frames guarantees a quick change of the inserts.

The "Stopper-Point" barrier is used in a wide range of applications. The flexible barrier post is easy to place and can be moved quickly and repeatedly. With a belt extension to all four sides, there are no limits in the barricading and demarcation. The belt can be extended to a length of 2.5 metres. Due to the dark colour, the belt easily separates from the posts and background so that the barrier cannot be overlooked. The belts remain securely hooked in during use. The high mobility of the barrier post is defined by its material properties. The entire stand is made of silver anodised aluminium. Due to the lightness of the aluminium the post weighs only 7.4 kg and is at the same time extremely stable. The stability is guaranteed by a base with a diameter of 33cm.

This classic click frame with 25 mm wide, silver anodised aluminium profile is ideal for single-sided poster advertising. For example, this poster frame can be used in the entrance area and sales rooms of companies, retailers, banks and public authorities. This poster frame is characterised by its high-quality workmanship and its silver anodised profile. The aluminium click frame is optionally available with mitred corners or chrome-coloured rondo corners. The cover foils used are made of anti-reflective, UV-stabilised material, which prevents the posters from fading. Furthermore, the anti-reflective coating of the foils - even in sunlight - ensures that the inserts are much easier to read. The rear wall of the click frame is made of weather-resistant polystyrene. The folding technique of the frames guarantees a quick change of the inserts. For the optimal clamping effect even after years, clamping springs made of spring steel are always used.

Floor box 8808A with a square housing made of stainless steel and anodised natural aluminum lid. Inside there are two aluminum device carriers for 4 units each, alternatively other combinations are also possible. It can be installed at any point in the floor, as pipes are used to feed the cables. Lid also closes when the plugs are inserted. Due to the low installation height, this version is particularly suitable for floors in old buildings. Further equipment variants on request.

This stable production table can be used flexibly thanks to four swivel castors (2 of which are lockable). As an integral part of your business equipment, the table can be used anywhere in the production or warehouse. The castors make it easy to move and lock it in place. It offers not only a mobile workplace but also a high load capacity. The table consists of our proven, silver anodised aluminium square profile "Quattro" and screen printing plates as work surface. The height of the two shelves is well thought-out and supports back-friendly working. With the purchase of this table you not only create additional work surface, but also storage space for materials, cardboard boxes or tools. Equip your employees with a high-quality and mobile production table!

The "Quattro" information board functions as a transparent and stable partition wall. The interaction of the aluminium frame in silver anodised and the transparent acrylic panel offers a simple exterior. At the same time, the board can provide a high-quality separation between customers, patients, employees and areas. A partition wall is a practical article to provide protection spontaneously and depending on the situation. Due to its low weight, the article shown is easy to move and mobile. Long queues, disordered areas or new hygiene regulations require the use of a separation or tracking system. High stability is guaranteed by two flat round base plates with a diameter of 400mm each. The light and anodised aluminium profile is placed on them. An acrylic sheet is held in the profile by a rubber in the frame. The transparent sheet ensures that the area of application is not optically reduced despite the use of a partition wall.

Extendable leaflet stand for mobile use at exhibitions and events. The exhibition stand unfolds in seconds using a clever technique to become a stable display which can be filled on one side. The folding leaflet stand consists of a silver painted MDF base together with a silver anodised aluminium scissor fold frame and is supplied with 4 A4 portrait leaflet holders in impact resistant polycarbonate (fill depth of each: approx. 30 mm). Feature: each leaflet holder has a practical section at the side to prevent leaflets folding over! The tiered layout of elegant leaflet holders offers a full view on the inserted content and guarantees easy removal of the material. In combination with a divider (optional extra) each holder can be converted to suit ⅓ A4 leaflets. A transparent pocket on the front panel allows for an A4 sheet to be inserted; Customise your folding leaflet stand to each occasion - without a frame, protected from dust, quickly and easily!

In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.

This stable partition offers flexibility and protection with the aim of screening standing persons and workstations from each other. The interplay of silver anodised aluminium uprights and transparent acrylic panel offers a simple exterior. At the same time, the panel can provide a high-quality barrier between your customers, patients, employees and areas. The crystal-clear acrylic panel ensures that daylight is retained in the room. It is attached to the standpipe with 3 sign grippers each. The silver anodized standpipe "Como" is held by silver powder-coated steel base plates. Such a partition wall is a practical article to provide protection at short notice and depending on the situation. By using the partition wall, the persons present can be separated not only physically. They can also be protected from each other. The wall is a separation and hygiene protection at the same time. In order to react to new situations, it can be quickly repositioned and still provide a firm stand.

The broker display "Construct" offers a lot of advertising space for the presentation of your information material on both sides. The information stand is clearly visible at the respective location and accessible from both sides for interested parties. Even from a distance, the broker display attracts the attention of customers and provides you with more detailed information about your products. The silver anodised aluminium frame profile highlights your advertising content. Due to its simple construction and appearance, the display can be integrated into any interior and at any location. The combination with corner connectors in the same colour creates a uniform appearance. Wire systems are attached to the base frame, to which the acrylic pockets are attached. The U-pockets allow a quick change of contents by simply pushing them in. The display is delivered pre-assembled and includes a plastic hammer.

The high-quality poster display made of silver anodised aluminium profile shines above all with its easy assembly and simple transport. Due to its weather-resistant polystyrene back panels and the 25mm profile, this A-board is one of our lighter display stands in this segment, making it ideal for windless locations or indoor areas. The lower weight does not reduce its stability. The used, narrow aluminium profiles and the installed high-quality hinges, which ensure the longevity of the display through a first-class processing, guarantee timeless elegance and straight design at the same time. The user-friendly exchange of your posters and inserts is easily and quickly accomplished by folding up the profiles. Extra-strong, anti-reflective cover films made of UV-stabilised material are used to protect the posters. For an optimal, long-lasting clamping effect, we always use clamping springs made of steel.

With the new height-adjustable monitor floor stand, RK Rose+Krieger is expanding its "RK monitor holder" product range to include a robust, ergonomic standing workstation for industry. The work surface and monitor mounting are supported by a stable triple column system and can be adjusted conveniently by hand to the size of the respective user. The three elegant, slim anodised aluminium columns stand on a black, powder-coated base frame which provides space for an industrial PC and accessories. Cables are elegantly routed in the integrated cable duct on the rear column. The light grey coated work surface (0.3 m2) can be adjusted by hand easily thanks to the tieback support. A spring-loaded locking bolt provides reliable latching. The height adjustment stroke is 400 millimetres. This way the workstation can be adjusted individually to the body size of the user. In addition, the height of the monitor can be adjusted separately and thus guarantees optimum workstation ergonomics.

Fast assembly and perfect organisation Modern machines contain countless power, data and control cables, along with pneumatic hoses. In large systems, the total length of these can quickly add up to several thousand metres. Cable channels make it easier to organise and assemble these cables. The BLOCAN® cable channel system made from anodised aluminium impresses not only with its attractive design, but also through a multitude of well thought out details, which offer the customer considerable added value and greatly facilitate their work. The cable channels in sizes 40, 40x20, 40x80, 80x40 and 80x80 can be supplied as 6 metre bars or cut to length. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN® profile slot by means of a pivoting mounting clip.

The elegant, silver anodised aluminium frame with LED backlit surface is the perfect frame for your advertising poster. Select the desired size of our promotional "LED" light frames and mount it in portrait or landscape format with the included hooks. Your advertising message will leave a lasting impression on your customers as it is backlit homogeneously. The rear acrylic diffuser ensures an even distribution of light. Your poster will be protected by a PET cover. The proven click frame technology eases the exchange of your advertising media. Modern and eye-catching, in darkness you direct the views of passing people to your store window. Even in dimly lit hallways and exhibition halls, the illuminated frame delivers your message to potential customers. Use the "Simple" LED light frame in a variety of ways. Advertise for a new cosmetics line, the current cinema film or the next event. The display with special luminosity is powered by a cable attached on the bottom.

"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.

Use: Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • The assembly type and design prevent the fitted built-in couplings from being pushed in or out. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws. • Flat, flush front surface enables easy cleaning. • Standard panels with 1

The CS-3000 suspension system is characterised by a combination of well thought-out ergonomics and modern industrial design. It consists of a large number of components that can be combined in any way. The CS-3000 suspension system is an innovative system solution that functions according to the modular principle. — Long service life and safe operation thanks to anodised aluminium tubes — Clean lines, thanks to smooth transitions between the tube and system components (very easy to clean) — Coated tube fastening screws for sealing the thread holes and secure connections — Relative appearance and connection of narrow profiles thanks to the possibility of reducing the cross section from square to round tube — Protection class IP65 — Modular flexible system lets you upgrade the couplings (also after installation), e.g. with adapters for slim enclosures or with tilt adapters — Well designed ergonomics for simple and virtually fatigue free operation