Aluminium ores - Import export

Stamp mouldings for embossed or recessed stamping of aluminium or stainless steel sheets for the car industry. We produce the stamp mouldings in accordance with your data in soft or hard condition. Thanks to the high-quality structures, the movement between top and bottom dies is precisely coordinated. The design is based on your drawings or data.

Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) iglidur® PRT slewing ring plain bearing data d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made ​​of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: Special properties: Slewing ring with high stiffening Simple installation, replaceable, maintenance-free sliding elements made of iglidur® J High wear resistance Available as aluminum or stainless steel version V4A (stainless steel only for PRT-01-60 and PRT-01-100) d [mm]: Special properties: Suitable up to 180°C, high chemical resistance For all 5 standard dimensions of style 01 Body in aluminium or stainless steel, sliding parts in iglidur® H1 d [mm]: Special properties: Free of lubrication and maintenance. For use in extreme dirt. Corrossion-resistant Robust and ready to install Available in dimensions 60 and 100, oneside (-D) or boothside (-DD) seal d [mm]: Special properties: For use in the food industry with gliding elements made ​​of FDA-compliant iglidur® A180 instead of iglidur® J standard. Can be naturally combined with the stainless steel versions of the slewing ring bearing. Lubricant- and maintenance-free For use in extreme dirt. Ready to install Rugged and wear resistant Application areas: Food processing industry d1 [mm]: 1 Aluminum, hard anodized 2 iglidur® J sliding elements

Aluminiumwerk Unna AG one of the world’s leading manufacturers of aluminium alloy tube. We produce a variety of specialist aluminium alloy products. Our core focus is the production of aluminium alloy tube and tubular profiles. These can be offered as seamless extruded or porthole extruded products. The extruded products can also be cold drawn making it possible to offer a comprehensive range of final dimensions.

Aluminiumwerk Unna AG is specialised in the production of Aluminium tubes. The Aluminium tubes are extruded on site using two possible methods. These are either Seamless extrusion or Porthole extrusion. It is quite simple to distinguish between the two extrusion methods. In seamless extrusion, a mandrel is positioned and fixed inside the extrusion die, creating the inner contour of the tube. In porthole extrusion, the mandrel is fixed and is supported by a number of integral bridges affixed to the outer portion of the extrusion die.

Floor socket 9901A made of solid aluminum with one slot. The reversible lid is anodized in natural aluminum or can be covered with carpet, linoleum, etc., closes in a straight or angled shape even when the standard plug is inserted. Further equipment variants on request.

Floor socket 9902A made of solid aluminum with 2 slots. The reversible cover is anodized in natural aluminum or can be covered with carpet, linoleum etc. and closes in a straight or angled shape even when the standard plug is inserted. Further equipment variants on request.

Round hollow floor tank 9908A with a housing made of sendzimir galvanized sheet steel, rim and lid made of solid aluminum with a lid for laying on. The cover also closes in a straight or angled shape when a standard plug is plugged in. The reversible lid is anodized in natural aluminum or can be covered with a carpet, etc. Other equipment variants on request.

Round floor socket 9904A with 4 slots. The housing of the floor socket consists of sendzimir galvanized sheet steel, the rim and the lid on solid aluminum. The reversible lid is anodized in natural aluminum, or can be covered with carpet, linoleum, etc. (covering recess 6 mm) and closes even when standard plugs are inserted. Further equipment and colors variants on request.

— Compaction-free "first in – first out" discharge — Ideal for consistent refilling of downstream metering or conveying equipment — Suitable for silos made of mild steel, stainless steel, aluminium or plastic

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set

This stainless steel intermediate bracket - specially designed for lifeline systems - was developed for penetration-free installation on a standing seam roof. This device is attached using aluminium or brass clamps depending on your subsurface (steel, copper, aluminium or titanium zinc). EN 795:2012, C + CEN/TS 16415:2017 Clamped onto a standing seam without penetrating your roof surface Mounted on a single seam For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Designed exclusively for use in a lifeline system Incl. installation set

This stainless steel anchorage point can be installed on standing seam roofs made of steel, copper, aluminium or titanium zinc without penetrating the roof surface. Depending on the subsurface, this kind-to-your-roof device is attached using the aluminium or brass clamps supplied in the package. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; aluminium & titanium zinc ≥ 0.7 mm For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Incl. installation set

highquality microfibre paper with spacers of thermoplastic adhesives particletight frame compound MDFframe, anodised aluminium profile or galvanised sheetsteel frame flat profile gasket selfsupporting media pack with optimised pleating geometry mounting independent of position enables easy installation

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Registration of inclination in the gravitation field using MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via a controller. Data output is carried out via the CANopen interface or as an analogue signal. The inclination sensor has a stable aluminium housing (optionally stainless steel). Slots are available for mechanical alignment (up to approx. ± 7.5°). In the case of CANopen, one connector or one male/female connector combination can be selected optionally for connection purposes. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.

Registration of inclination in the gravitational field by means of MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via controllers. MEMS sensors are integrated circuits manufactured using silicon bulk micromechanical technology. Double capacities are formed with the aid of moveable micromechanical structures. If these structures are deflected in the case of acceleration, e.g. gravitational acceleration (g), this results in capacity changes, which are registered and further processed using measuring technology. The output voltage follows the function U ~ g * sin α. In this case, the angle α is the sensor's inclination angle measured against the g-vector. These sensors measure precisely, have a long service life and are very robust. The measuring axes operate independently of each other.

Registration of inclination in the gravitation field using MEMS sensors (Micro-Electro-Mechanical-System) with subsequent digitisation and linearisation via a controller. Data output is carried out via the CANopen interface or as an analogue signal. The inclination sensor has a stable aluminium housing (optionally stainless steel). Slots are available for mechanical alignment (up to approx. ± 7.5°). In the case of CANopen, one connector or one male/female connector combination can be selected optionally for connection purposes. Casting measures in the housing lead to the achievement of protection class IP 69K, e.g. for use under water.

A positive mechanical connection between the customer shaft and the sensor shaft ensures that the magnet of the sensor shaft accurately reproduces the rotation of the customer shaft. The TBE measures one revolution, i.e. a maximum of 16,384 steps/revolution. With the trailing absolute gear, the TRE rotary encoder achieves a measuring range of up to 4096 revolutions. The zero point and the code progression can be set or changed via the inputs 'Set input' and 'Codevelauf' (each input circuit E1).

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit. Note (TMA, TMN): The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ±90° during the interruption of the supply voltage.

The angle transducers have a magnetic scanning according to the HALL principle. Due to the robust design, critical and interference-free applications in harsh environments can be realized. They have a robust housing (wall thickness > 5 mm) made of aluminium or stainless steel, shaft and ball bearing made of stainless steel, shaft with flattening, rotor with shaft and permanent magnet mounted in prechamber, sensor circuit consisting of ASIC with Hall elements and interface electronics housed in closed main chamber. Two models are available: For low and high temperature applications. The model for low-temperature use is equipped with a special grease for bearings and shaft seal. Seals and shaft seal are made of PTFE. Cable gland with clamping jaw pressure screw and silicone seal. The high temperature model is without shaft seal. Under the rear cover, there is a signal path switch (CW/CCW). On the side there is a preset button (4 mA) placed under a screw plug.

The angle transducers have a magnetic scanning according to the HALL principle. Due to the robust design, critical and interference-free applications in harsh environments can be realized. They have a robust housing (wall thickness > 5 mm) made of aluminium or stainless steel, shaft and ball bearing made of stainless steel, shaft with flattening, rotor with shaft and permanent magnet mounted in prechamber, sensor circuit consisting of ASIC with Hall elements and interface electronics housed in closed main chamber. Two models are available: For low and high temperature applications. The model for low-temperature use is equipped with a special grease for bearings and shaft seal. Seals and shaft seal are made of PTFE. Cable gland with clamping jaw pressure screw and silicone seal. The model for high temperature use is without shaft seal. Under the rear cover there is a signal changeover switch (CW/CCW). On the side there is a preset button (4 mA) placed under a screw plug.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Robust case with wall thickness of 5 mm either in seawater resistant aluminum or in stainless steel - shaft and ball bearings in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via round plug or lead exit.

Robust aluminium or stainless steel housing (wall thicknesses up to 5 mm) - stainless steel shaft and ball bearing - ball bearing with Simmer ring, rotor with shaft and permanent magnet mounted in pre-chamber - sensor circuit consisting of ASIC with Hall elements and interface electronics in enclosed main chamber - housing protection type IP 69K additionally cast - electrical connection via cable (open cable ends).

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integral counter for the acquisition of revolutions, with non - volatile storage - optional potting against water jets (IP 69K) - electrical connections via lead exit (with connector for testing). Note: The device restores the position value in case the supply voltage is cut off, provided that the shaft is not deflected by more than ± 90° during the interruption of the supply voltage.

A positive-locking mechanical connection between the cus-tomer’s shaft and the sensor shaft ensures that the magnet in the sensor shaft precisely reflects the rotation of the cus-tomer’s shaft. With the TBN model, one rotation (i.e. max. 16,384 steps) is recorded.With the subsequent absolute transmission, the TRN shaft encoder reaches a measuring range of up to 4096 rotations. The position and speed values (PDO - Process Data Object) are output via the CANopen protocol.

A positive mechanical connection between the customer shaft and the sensor shaft ensures that the magnet of the sensor shaft accurately reproduces the rotation of the customer shaft. The TBE measures one revolution, i.e. a maximum of 16,384 steps/revolution. With the trailing absolute gear, the TRE rotary encoder achieves a measuring range of up to 4096 revolutions. The zero point and the code progression can be set or changed via the inputs 'Set input' and 'Codevelauf' (each input circuit E1).