Adjustment - machine tools - Import export

Upper run guide for long travels, unsupported in swarf areas Especially in machine tools on long travels, when the energy chain has to be used in a sliding manner, metallic swarf is a problem. guidelok is the cost-effective solution for travels, unsupported up to 50m. The guidelok horizontal is more cost-effective than many steel chains or complex sliding systems. Typical industries and applications: Machine tools, applications in swarf area, anywhere where gliding application is not recommended

MV multivibratorsThe finishing touch for complex shapes If you have workpieces with hard-to-process contours that require fine finishing or polishing, the multivibrators of the MV series are the ideal choice. The respective workpiece is secured mechanically or electromagnetically, and processed using vibrating abrasive media and special fluids. This ensures a consistent finish on both the internal and external surfaces. Automated internal finishing on premium parts Our multivibrators each have three high-speed imbalance drives that allow you to vary the position and rotation direction. This enables extremely small vibration amplitudes, ensuring high surface quality for your workpieces – even on difficult-to-reach areas. Delicate bars are protected, the workpiece contours are retained, and even small-diameter boreholes can be processed internally.

Robust mass finishing machines with separation zone The CD series of circular vibrators are robustly built and stand out thanks to their wide range of potential uses. From polishing and smoothing to deburring, the integrated screening unit helps easily separate workpiece and abrasive media using a manually or pneumatically powered separator flap. The CD circular vibrators are available in configurations from 110 to 1,200 litres of gross volume. Perfect configuration for large workpieces Thanks to the flat bowl bottom and the large opening between the bowl bottom and the separator flap, processing your large and sensitive workpieces is easy. CD circular vibrators also have a large separation zone for simple separation of flat components. The benefits at a glance — Integrated screening unit — Manually or pneumatically powered separator flap — 110 to 1,200 litres gross volume — Flat bowl bottom — Extra-long separation zone

A HIGHLY EFFICIENT METHOD WITHOUT THE RISK OF WORK PIECES DAMAGING EACH OTHER Compared to standard mass finishing systems the newly developed M-TMD machine range finish high-value components 10 to 20 times more efficiently! By mounting the work pieces individually to workstations, which are part of a rotating carousel, you can process up to 18 work pieces in one single batch without risking part-on-part impingement. Different workstation angles - relative to their vertical position - allow the individual adaption of the machine parameters to your work pieces and guarantee absolutely stable finishing processes with excellent and repeatable results. APPLICATIONS: Orthopedic implants (medical engineering) Turbine blades (for airplanes as well stationary turbines) Precision components, for example, for pumps and compressors Work pieces made from tungsten carbide and other hard metals Fan wheels for turbo chargers (automotive industry) Sintered components, etc.

PARTS CLEANING FOR REPAIR AND MAINTENANCEImportant components require thorough and regular cleaning and maintenance, especially in industry, mechanical engineering and the automotive sector. Our TRT 83 x 37 cleaning trough removes grease, lubricants and other residues thoroughly and reliably, before the components are reinstalled. WHICH WORKPIECES CAN BE CLEANED? You can use the TRT 83 x 37 cleaning trough to effortlessly clean workpieces measuring up to 80 cm in length and 30 cm in diameter. Here are some examples: Bearing shells and covers Engine components Gearbox components Shafts and axles Labyrinth rings Bearings, bearing units and bearing housings

POWERFUL AND EFFICIENTThanks to their "Multivib" drive, the TMV range of trough vibrators ensures intensive workpiece processing throughout the entire bowl length. The extremely powerful drive also makes the machines suitable for ball polishing and pressure deburring. VARIOUS BOWL SIZES The modular series of the TMV range allows you to select the right bowl size for your requirements. This helps you save both costs and energy when processing your workpieces. Bowl widths: 410, 550, 650 and 850 mm Bowl lengths: 1,750, 2,600, 3,450, 4,300, 5,150, 6,000 and 6,850 mm SOUND DEADENING ENSURES LOW NOISE LEVELS Noise levels can be high, especially in a hall. That is why the TMV trough vibrators are fitted with a sound deadening lid, with complete sound deadening housings also available. Larger systems also feature walk-in sound deadening cabins.

MAXIMUM PERFORMANCE! Compared to vibratory finishing vibrators, Trowal Turbotron centrifugal units offer up to 10 times the grinding power. grinding performance. Turbotron machines are mainly used for the removal of heavy burrs and for edge rounding edges on small and medium-sized mass-produced parts. However, by applying special process techniques, Turbotron machines can also be used for fine grinding and even polishing. even polishing. HOW IT WORKS The rotation of the turntable (60-250 rpm) accelerates the abrasive / workpiece mass and the centrifugal force on the inner wall of the stationary work bowl deflects it upwards. deflected. Due to the onset of gravity, the mass slides back onto the turntable, from where it is accelerated again from there.

OUR ENTRY-LEVEL MODEL – EFFICIENT AND COST EFFECTIVEThe circular vibrators of the CF series are a perfect and simple introduction to mass finishing. The seven different configurations, with a range of different bowl sizes, offer excellent efficiency and maximum cost effectiveness. The CF circular vibrators are easy to operate and can be expanded with accessories for sound deadening or metering, for example. PROCESSING AND SEPARATION – SMOOTH MASS FINISHING The work bowl with an evenly rising floor is perfect for processing your workpieces, as the zero-maintenance vibration flange motor works at two different speeds. The pneumatic separator flap and long separation zone allow you to gently separate your workpieces from the abrasive media. This creates a smooth mass finishing process with excellent results.

Efficient mass finishing for the toughest requirements With a circular vibrator from our CB range, you get a mass finishing machine that works efficiently and achieves perfect processing results. The working channel is helically shaped and allows you to gently process your workpiece whilst ensuring high material abrasion. Gate clearing at the push of a button By pressing a button on the unit, you can quickly reverse the motor's direction of rotation before separating your workpieces from the abrasive media. This ensures that no workpieces or abrasive media are left on the gate that could get trapped between the separator flap and the working channel. Ideally suited for ball polishing and pressure deburring The CB circular vibrators stand out thanks to their robust steel construction and reinforced imbalance drive in the ball polishing configuration. This makes them ideal for ball polishing and pressure deburring with blasting medium.

EXTREMELY GENTLE PROCESSINGRotating barrels offer a cost-effective and technically ideal solution, particularly when processing small parts in medium batches. This helps you get fine surfaces with neatly rounded workpiece edges, thanks also to the relatively long processing times. Trowal rotating barrels are also excellent for fine finishing and polishing. SOPHISTICATED TECHNOLOGY The barrel body is an octagonal, welded, biconal structure. It generates a triple sliding action in the mass of abrasive media with the workpieces to be processed. The lining consists of tear-proof rubber or PU, with the tight-sealing safety cover made of polyurethane. BARREL BODY WITH LIFTING AND LOWERING DEVICE The automatic lifting and lowering device lets you quickly feed and empty the barrel body. This is a major advantage, especially when processing times are short and when you are operating multiple rotating barrels.

ROBUST, COST EFFECTIVE AND VERSATILEWith a trough vibrator from our TFM range, you get a mass finishing machine that can trowalize large and sensitive parts as required. Alongside an excellent processing result, this machine stands out above all thanks to its great-value purchasing costs. The bowl can also be supplied with a rubber lining. WITH U OR PEAR-SHAPED WORK BOWL TFM vibrators are supplied as standard with U-shaped work bowls with straight walls, which can also be ordered with integrated wedge profile for better mass circulation. Pear-shaped work bowls with double-retracted walls are also available for even greater robustness. VIBRATION VIA CONVENTIONAL IMBALANCE MOTORS Powerful conventional imbalance motors generate the imbalance in the trough vibrators. Your TFM vibrator will have one or two imbalance exciters depending on its size.

The specialist among the all-rounders The CM series is best for processing large, heavy and sensitive workpieces. They are available in seven configurations with bowl volumes ranging from 115 to 1,000 litres. You can also choose from a wide range of accessories – such as for sound deadening or metering – to ensure that the CM circular vibrator fits your requirements precisely. Processing sensitive workpieces To ensure that your sensitive workpieces are processed gently, we have purposely not fitted the CM series with a screening unit. Depending on your individual processing goal, you can choose a moving separating plate and pneumatic bowl outlet. These both help keep sensitive components apart so they do not damage each other. The benefits at a glance No screening unit 115 to 1,000 litres gross volume Flat bowl bottom Pneumatic bowl outlet (optional) Moving separating plate (optional)