Adjustable table - Import export

Avola building site table saw ZBV 500 S with height and tilt adjustment and safety guard. The new ZBV 500-S is a height and tilt adjustable building site circular saw with a 500 mm saw blade. The ZBV 500-S also enables bevel cuts with a high cutting height on the construction site. Above all, the increasingly used insulating material can be optimally processed in connection with the AVOLA special circular saw blade HM / A / PH (see above).

The Multilift is for continuous height adjustment of tables, equipment, assembly workstations and similar applications. The lifting column can be operated alone or as a pair in parallel. To establish a configuration with absolute synchronous run of several drives (maximal 4) a special drive control is available as synchronous version. Max. travel. 498 mm Max. compressive force. 3000 N Max. tensile force. 1000 N Max. travel speed 8 / 16 mm/s Protection rating IP 20

Table column for two monitors with adjustable height, rotation and tilt of the screens. • Monitor mount for 2 screens including individual mounting option by bolt-through fixing and table clamp • Height, tilt and position of the monitor can be adjusted easily and individually to facilitate ergonomic working • Can be rotated 360° for working in portrait or landscape mode • The arms can be flexibly extended to 36 cm by three joints and swiveled up to 180 ° • Stepless height adjustment of the screens on a 45 cm high column • Universal VESA mount (75 x 75 mm or 100 x 100 mm) • For standard monitors up to 27“ and up to 8 kg • Cable management: The monitor cable is guided along the monitor mount by clamps, thus protecting against cable breakage

LED double-headed daylight floor lamp for visual comfort in the office • 2x 7,000 lumen – recommended for open space solutions • Even illumination of spacious rooms thanks to double asymmetrical light distribution • The colour temperature of 4,000 K with a colour rendering index of Ra > 80 provides optimal working light • The combination of direct/indirect light provides a sense of natural lighting and gives the appearance of an uncluttered ceiling • Intuitive settings for adjusting light intensity and light colour via the VITACORE® electronics touch panel • Energy-efficient lighting with an output of 130 lm/W • High-quality, energy-saving lighting thanks to automatically controlled presence and light intensity sensors • Temperature management for a long service life of the LEDs of well over 50,000 hours • Ideal for height-adjustable tables • Made in Germany

Universally adjustable stand for laptops and tablets from 10″ to 17″. With infinitely variable height and reading angle adjustment. • Universal, adjustable table holder for laptops and tablets between 10” and 17” • Facilitates ergonomic working with its flexible height and tilt angle adjustability • Allows laptops to be used as desktop monitors (when combined with external keyboard and mouse) • High stability for secure working • Non-slip rubber surfaces protect the device from scratches • Folds to save space and easy to take with you • Improved heat extraction thanks to air holes and aluminium plate  • Large recessed grip makes it easy to open and close the laptop • Extremely robust. Made from 3.5 mm thick aluminium to support laptops reliably and long-term • Creates space and keeps the desk tidy

LED daylight floor lamp for visual comfort in the office • 12,000 lumen for offices with single and double workstations (approx. 16 sqm) • Even illumination of spacious rooms thanks to double asymmetrical light distribution • The colour temperature of 4,000 K with a colour rendering index of Ra > 80 provides optimal working light • Energy-efficient lighting with an output of 130 lm/W • The combination of direct/indirect light provides a sense of natural lighting and gives the appearance of an uncluttered ceiling • Intuitive settings for adjusting light intensity and light colour via the VITACORE® electronics touch panel • High-quality, energy-saving lighting thanks to automatically controlled presence and light intensity sensors • Temperature management for a long service life of the LEDs of well over 50,000 hours • Ideal for height-adjustable tables • Made in Germany

SR2 provides controlled motion to adjust the height at any position. Through its inverse interrupting mechanism, this breakthrough technique conducts driving from the input shaft to the output shaft and locks the input in place even if the drive is stopped. Thanks to this new mechanism, you can easily lift heavy objects and lock them precisely into position. This new control motion is perfect for applications such as adjustable tables, handicap sinks, and more. [Benefits] ･ No power supply ･ Easy operation ･ Ready to install ･ Competitive price

The delivery table is designed in such a way as to leave the expectant mother much freedom of movement, allowing her to choose from a great variety of birthgiving positions. The expectant mother can adjust the table herself through all its adjustment functions using the hand-held control unit The comfortably padded mattres is wide enough to allow active support by the partner The midwife can use the foot section as a seat The closed, smooth covering and the mattresses and pads are easy to clean and to disinfect If required, the bed may be adjusted in just a few easy steps so as to allow rapid medical intervention

- Large and ergonomic height adjustment range - No displacement of table-top during height adjustment - Moulded base provides generous legspace 4 different models: Height adjustment 500 to 920 mm, either by means of hydraulic foot lever or electric foot switch with safety ON/OFF switch, 650 mm or 800 mm width. Servo-assisted head section adjustment from -20° to +40°. 2-section upholstery 70mm thick, leatherette cover acc. to colour chart. Powder coated chassis in white aluminium RAL 9006, grey aluminium RAL 9007 or grey white RAL 9002. Silver-grey plastic chassis cover. With 4 levelling feet, not electrically conductive. Safe working load: 225 kg Options: Head section with nose outlet, mobile version,fold-down side guards

For measuring ranges up to 600 Nm Torsion testing machines by TesT are also available as vertical machines, equipped with T-slot table and height-adjustable drive. They are individually built as construction kit versions, always in accordance with customer demands. Thus, it is easily possible to incorporate individual preferences and specific customer requirements. Drive and control units, machine tables, frames and data acquisition will be integrated as finished components. All torsion testing machines are equipped with the TesTController 850 that is TEDS compatible. The corresponding software TesTWinner® provides the user - besides to its free programmability - an immense repertoire of possibilities for standard test procedures and routine test execution, evaluation, presentation and further processing of results, automation of processes and much more. A wide application field is guaranteed by a comprehensive range of accessory.

Following product changes or a surface defect detected by the monitoring equipment, the aected mat section has to be rejected and discharged in time before reaching the ContiRoll®-infeed. This is ensured by Siempelkamp’s reject mat system. It is an in-line element of the forming line. Thanks to its modular design, it can be adjusted to the product parameters, enabling reliable press protection and a quick and material ecient plant restart. Features Drive/reject mat unit including track support Reject mat hopper Integration in the belt drive station Motor-adjustable table including belt deection nose Motor-adjustable belt cleaning brush Advantages Distance-controlled activation for an optimised material discharge and minimised rejects volume Options Including disintegrating rollers Including dust ap Hydraulic reject mat drive Nose stroke 3000 mm or 4000 mm

e adjustable table in various selection with our configurator