1 m - Import export

Application optimized read/write heads in the industry-standard design (up to IP69K with HF), allow for optimal integration into your application. Depending on the environmental conditions, read-write ranges of up to 1 m (HF) or several meters (UHF) are possible. The radio interface for read/write heads and data carriers is internationally standardized (ISO 15693 and ISO 18000-6c with HF at UHF).

FTA Floating moving end Compensate parallel errors The igus® compensator for gliding applications with E2/000 and small E4.1 energy chains. At moving arms with strong lateral offset the floating moving end provides for a compensation and therefore for a force-free run of the energy chain in the guide trough. This extends the life time of your application. -Small, light and low priced -Compatible with PPDS basic analysis units -The basic ”floating moving end“ can be used with the following chain series: 2500, 2700, 3500, E4.28, E4.32 and E4.42 Max. travel distance:100m Max. acceleration: up zo 50m = 2 m/s 2 | 50-100m = 1 m/s 2

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

1 internal /*1 external thread M 10*Ø 12 mm*size of jaw 10 mm

The artist of the area management: On less than 1 m² the "Delux" displays 18 different print media, brochures and flyers, decorative and protected. The wall brochure holder becomes an individual wall magazine. Your flyers and advertising media are 100% visible as the display is completely transparent. The brochure hanger made of unbreakable acrylic is equipped with 48 mm filling depth per compartment. Screws and rawl plugs for wall mounting are included.

For controlled and steered bores, In limited space, for high precision requirements, For house service connections on sloping terrains, beneath stairs, walls etc., bores that can’t be established using a soil displacement hammer up to 50 m bore lengths, For bores directly out of the building, as the machine is able to be dismantled, For bores out of manholes from 1 m diameter on (PIT S), For a quick, clean and economic jobsite execution.

Installation of new PE-100 RC pipes as a pipe string (long pipe) Pipe installation via a starting manhole from 1 m diameter Installation length up to 150 m New pipes OD 192, 242 and OD 292 Tight in pipe means only minimal cross-section loss and small annular space without filling The hydraulic capacity of the new pipe can be in-creased by using pipes with smooth interior lining House connections can be connected without the need for trenches

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

The CS-3000 neXt combines functionality with an appealing design. The wide range of components, the high strength of the system and the load capacity provide individual solutions. • Light-duty suspension system for lightweight control enclosures up to 80 kg with an extension arm length of 1 m • Modular system for rapid implementation of individual solutions • Maximum system length: 1.5 m • Compatible with the CS-3000 series • Panel couplings with VESA 75 and 100 • Smooth transitions from pipe to component

Flowmeters especially for gases The VA 45 variable area flowmeters were designed to measure gases. They can be used, for example, in industrial ovens, forges and furnaces, and protective gas and heating systems. The standardized device design is available with various connections that conform to standards. The glass measuring cone, protected by a metal sleeve with a viewing glass, makes it easy to read the flow directly.

Fire protection duct I120/E90, to DIN 4102 part 11 and part 12, including 12 x countersunk head screws and 3 x 1 m sealing strip.

This sharp edge-tested lanyard (in accordance with EN 35´4:2010), which is equipped with an energy absorber (in line with EN 355:2002) and 2 carabiner hooks, is based on a robust kernmantle cable. It is available in three set lengths: 1 m, 1.5 m and 2 m. EN 354:2010 & EN 355:2002 Sharp edge-tested kernmantle cable (Ø 12 mm) Incl. 2 carabiners and energy absorber Lengths: 1 m, 1.5 m, 2 m The 1.5 m and 2 m models can also be supplied with a pipe hook

This temporary guard rail system was specially designed for pitched and flat roofs and is simply hooked onto the gutter or parapet. Any force exerted on it is distributed through its special facade supports. This lightweight guard rail, which is made of high-quality aluminium material, weighs less than 10 kg per meter. EN 13374:2013, C Designed for temporary usage Also suitable for overhanging roofs ≤ 1 m Lightweight and easy to transport Can be easily adapted to fit your architecture

Use one of these mobile kernmantle cable systems to temporarily install a horizontal lifeline system on a pitched or flat roof. This lanyard is equipped with freely-moving carabiner hooks and is available in 3 lengths: 15 m (1 hook), 23 m (2 hooks) and 30 m (3 hooks). EN 795:2012 & CEN/TS 16415:2017 EN 353-2:2002 & EN 358:2000 Sharp edge-tested kernmantle cable (Ø 12 mm) acc. RFU CNB/P/11.075 Incl. energy absorber and adjustable rope shortener Secures up to 4 individuals Incl. spliced carabiner hooks which move freely along the cable (15 m = 1 hook, 23 m = 2 hooks, 30 m = 3 hooks)

Cable conduits made of PVC-U with adhesive sleeve Manufactured acc. to DIN 16875 Standard design: Sleeve type: adhesive sleeve Sharp end: onesided with chamfer Length: 6 m Colour: black/anthracite Possible designs: Length: 1 m to 6 m Colour: special colours are available in request Labelling: acc. to customer specifications

Split Pipes made of PP with clamp locking For the subsequent protection of cables, which have already been laid. - Sealed against fine sand - Reusable - Including moulded sleeve - Extendable to any length - The joining of the split pipes does not require any tools - Can be angled by 10° per meter in each direction - 3 red locking clamps are pre-mounted Standard design: Material: PP Locking system: clamps Colour: black Length: 1 m

Corrugated cable spacers We recommend the use of our Z.I.S. Kunststoff corrugated cable spacers for laying cables, wires and pipes next to each other while ensuring the required distance between them (e.g. separation of high-voltage and low-voltage cables). Standard design: Material: PVC-U Colour: black Length: 1 m Possible designs: Colour: on request Length: 0,25 m and 1,5 m

Split pipes made of PVC-U with snap-on locking For the subsequent protection of cables, which have already been laid, or for repairing damaged pipe systems. - sealed against fine sand - reusable - extandable to any length - the joining of the split pipes does not require any tools - a continuous pipeline is achieved by offsetting the top split pipe (no sleeves required) Use as a repair split pipe: Our split pipe is constructed in a way that the locking mechanism is on the outside of the pipe, which means that the inner diameter of 100 mm is fully usable without dimensional limitations. Therefore, the split pipe can be clamped over the defective cable conduit like a plaster over a wound. Standard design: Material: PVC-U Locking system: snap-on lock Colour: grey Length: 3 m Possible designs: Length: 1 m to 3 m Colour: special colours are available on request Labelling: acc. to customer specifications

Cable conduits made of PP with plug-in sleeve Manufactured acc. to DIN 16878 or prEN 14285 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications

Cable conduits made of PE-HD with plug-in sleeve Manufactured acc. to DIN 16876 Standard design: Sleeve type: integrally moulded plug-in sleeve (SM) Sealing ring: compression lip sealing ring, type “SX” (inserted in the factory) Sharp end: with plug-in depth marking and chamfer Length: 6 m Colour: black Inner surface: smooth Possible designs: Quality: DIN 16874 Length: 1 m to 6 m Coloured stripes: co-extruded Colour: on request Outer surface: coloured co-extruded or solid dyed Inner surface: inner grooves for reducing the cable pull-in forces Labelling: acc. to customer specifications