Power amplifiers - Import export

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-250 is a high-peak power MOPA with a peak pulse power of over 180 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-500mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 25 µJ single pulse energy and an average power of up to 500 mW. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-650 is a high-peak power MOPA with a peak pulse power of over 400 kW. It delivers 650 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The DUV MOPA266-50 is a high-peak power MOPA with a peak pulse power of over 50 kW. It delivers 50 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA355-200 is a high-peak power MOPA with a peak pulse power of over 140 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.

Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-2000 mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 140 µJ single pulse energy and an average power of up to 2 W. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA532-200 emits pulses with a pulse width of around 1 ns and 200 µJ pulse energy. The average output power is 200 mW in transverse single-mode operation at a wavelength of 532 nm and peak pulse powers of >130 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA355-100 emits pulses with a pulse width of around 1 ns and 100 µJ pulse energy. The average output power is 100 mW in transverse single-mode operation at a wavelength of 355 nm and peak pulse powers of >80 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA213-20 emits pulses with a pulse width of around 1 ns and 20 µJ pulse energy. The average output power is 20 mW in transverse single-mode operation at a wavelength of 213 nm and peak pulse powers of >30 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.

The eMOPA product series is based on a diode-pumped, passively Q-switched solid-state laser as the master oscillator and a downstream diode-pumped power amplifier with a patented optical design. Wavelengths from the DUV to the green spectral range can be generated for this series: 213 nm, 266 nm, 355 nm and 532 nm. The eMOPA266-40 emits pulses with a pulse width of around 1 ns and 40 µJ pulse energy. The average output power is 40 mW in transverse single-mode operation at a wavelength of 213 nm and peak pulse powers of >50 kW. The repetition rate can be adjusted from single shot to a maximum of 1 kHz by external triggering or the supplied software. The eMOPA is ideal for 24/7 industrial use and is primarily used in ophthalmology. By adapting the lasers to the requirements of our customers, a wide range of applications is possible, such as photoacoustics and ophthalmological markings.