Automotive sector - Import export

Other information Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius UL94-V2 classification Series E1.10 Inner height hi: 10 mm Inner height Bi: 13 mm Bending radii R: 18 mm Pitch: 20 mm E-Chain®, snap-open along the outer radius Series E1.17 Inner height hi: 17 mm Inner width Bi: 21 - 44 mm Bending radii R: 28 mm Pitch: 25,5 mm E-Chain®, snap-open along the outer radius E1.18 series Inner height hi: 18 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25.25 mm E-Chain®, snap-open along the outer radius Series E1.20 Inner height hi: 20 mm Inner height Bi: 15 mm Bending radii R: 28 mm Pitch: 25 mm E-Chain®, snap-open along the outer radius Other information E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Shortening and lengthening of the E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. E-Chain® Applications Overview E-Chain® in one band Cost-effective solution for large numbers E1: E-Chain® in one band Length of each chain band: 255 mm Can be shortened or lengthened as required through injection-molded, modular chain band Easy snap-open Mounting link for connection of several chain bands Fastening potential by the bore on the chain band Several potential materials Typical industrial sectors and applications General construction machinery Automotive sector Office technology Machine construction Electronic equipment General construction machinery etc. UL94-V2 classification

When it comes to seat heaters, we at Embro think first and foremost of the textile processors of vehicle seats. Because our textile heating elements are in great demand in the automotive industry. They are easy to process, flexible, and kink-resistant. The heat output is individually adapted to the customer’s requirements in the development process and suitably distributed and laid out on the desired surface (wire laying). With the increasing number of electric vehicles being produced, the demand for further heating solutions for the interior area is also rising. Embro heating mats heat the seats and interior via heating elements in the center and side armrests and trim parts. As a developer or engineer in the automotive sector do you need a specific heating element for a product? We are looking forward to your ideas!

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

Induction hardened shafts, manufactured to the tightest tolerances according to ISO h6, piston rods for the hydraulic sector or headrests in the automotive sector. These are just three of many hundreds of application examples. Further applications can be found in railroad technology, shipbuilding and renewable energy.

We offer a large standard assortment of high-quality tactile short-stroke switches or micro switches and micro switches. The switches and pushbuttons are characterised by a high level of workmanship and a long service life (up to 1 million cycles). The microswitches are used in medical technology, industry, entertainment technology and in the automotive sector and are suitable for PCB assembly. They are supplied on a roll. If your desired specification is not available in our standard range, please feel free to contact us at any time. Completely customised developments are also possible.

INOX is also a manufacturer of various liquid cleaners. Whether alkaline, acidic, neutral or solvent-based - we can offer you surface-active cleaning concentrates for every application which are tailored to your specific needs. All ingredients reflect the current state of our knowledge and are used in accordance with the applicable legal regulations. They have been tested for ecology, biodegradability and economic use. Our chemical cleaners are used in the automotive, household and industrial sectors for cleaning floors, sanitary equipment and textiles.

STOL®76M is a modified version of the STOL®76 alloy. In its tinned version it has reduced peelingoff effects depending on the usage conditions. The improved properties are of particular interest for connectors used in the automotive, electrical and electronics sectors. The alloy combines high electrical conductivity, medium to high strength and good relaxation resistance up to an operating temperature of 150°C, combined with good formability.

For many years, we have been your expert and high-performance supplier for companies in the automotive and commercial vehicle sector, for construction and agriculture, in the wind turbine sector and in the industrial sector – from Bavaria for the whole of Germany. Due to regular product training of our employees and a maximum of experience, our consultants are available to you personally on site or by telephone with advice and assistance. Thanks to our high storage capacity of over 1,000 pallet spaces, our tank farm for bulk goods and our high-performance logistics network, we can supply you quickly and reliably throughout Germany. Smoothly to success. With Diermeier.

INOX is an independent German lubricant manufacturer for customers in the automotive and industrial sector. We deliver customized high performance lubricants to oil companies, brand owners and distributors with their own company labels. Our highly technological semi-automatic and fully automatic filling lines were developed as special purpose machines specifically for these requirements. As one of our services we provide assistance and specific knowledge to well-known companies in the petroleum industry, to retailers and original equipment manufacturers (OEMs) with after-sales service.

We supply flat bars, including Wide Flat Bars range as per the EN/ASTM/DIN/BS norms serving to construction, ship building, energy, automotive, machinery and transportation vehicle sectors. Our common stock and production range is ; Quality S235JR / S355J2 to EN 10025 Flat bar 20 – 200 mm Thickness 5 – 25 mm whereas supply as per customer requirements from rolling is possible.

Westfälische Drahtindustrie manufactures steel wire for upholstery springs for use in the furniture industry and the automotive sector.

Half pallets from Craemer offer impeccable stability at half the size of a standard Euro pallet. From food processing to the automotive sector - the Craemer range of high-quality 800 x 600 millimetres half pallets includes solutions for numerous industry needs. Craemer also offers half pallets for retail and food logistics that help increase process reliability and are a durable and robust alternative to the Düsseldorf pallet. Discover the portfolio of high-quality half pallets from Craemer: CR2: Easy handling, ideal for non-automated distribution processes H2: Hygienic, ideal for use with all standard box systems D2: Alternative to the Düsseldorf pallet, offers process reliability in the supply chain

With the HY21W, vosla offers a high-quality, German-made signal lamp for the automotive sector - with amber coating. This HY21W is representative of a broad portfolio of signal lamps.

The injected Neodymium magnets are magnetic products mixed with different plastic products. Its main advantage is the diversity of molding offered by the injection process, allowing the products to be customized to meet the needs of the customers. Advantage Injected Neodymium magnets are more resistant to corrosion than sintered Neodymium magnets, with this character, they can be used in most applications without special coatings.Produced by injection process, injected magnets are with high precision and are tailored for each application. This type of injected magnets can be used under working temperature from 100oC to 200oC with good performance. Application The scope of application of the injected magnets is very wide, our magnets are widely in different industrial sectors, such as automotive, electronics, robotics ...

As the need for fans that are used in applications subject to high temperatures is constantly on the increase, SEPA EUROPE is presenting its latest sleeve bearing fan equipped with MagFix technology that can be used for operating temperatures up to 85 °C. An added advantage is the extraordinary high life expectancy of 210.000 h (MTBF). This fan is not only available in the standard sizes but also as a tailor-made solution. With the high operating temperature of up to 85 °C, this innovative fan generation by SEPA EUROPE opens up a wide range of new applications for the user, not least the automotive sector. The term MagFix stands for magnetic fixation (positioning) of the fan propeller/rotor in sleeve bearing fans.

We manufacture highly complex interior components specifically for the automotive sector that are used directly in the field of vision of a vehicle and therefore have to meet particularly stringent quality and haptic requirements. One operation, no additional installation effort and maximum process reliability: Our innovative multi-component injection moulding not only opens up new possibilities in terms of design but also offers maximum production safety through the use of standardised processes at maximum efficiency. Our customers have already come to rely on our experience and expertise as a full-service partner in the development phase of their products. Sophisticated production solutions are our speciality.

Embossing punching is an important technique in the automated production of car parts, guided by robots. A laser system with a sensor harness measures the car body and its machining plane so that the embossing depth can be determined with maximum accuracy. The car body part is then embossed accordingly and all necessary holes are punched. Embossing punching is used for the fixture of headlights, bonnets, sliding roofs, boot lids and locks as well as wings. Our embossing punching machines are suitable for single-layer steel and aluminium sheet metal. This offer includes: • Embossing punching frame (assembly elements or components can be perfectly aligned to a mating part of different dimensions) • Handling: robot-guided via defined interfaces (mechanical, electrical, pneumatic) • Servo motor-driven Tool inserts and measurement are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer!

PARTS CLEANING FOR REPAIR AND MAINTENANCEImportant components require thorough and regular cleaning and maintenance, especially in industry, mechanical engineering and the automotive sector. Our TRT 83 x 37 cleaning trough removes grease, lubricants and other residues thoroughly and reliably, before the components are reinstalled. WHICH WORKPIECES CAN BE CLEANED? You can use the TRT 83 x 37 cleaning trough to effortlessly clean workpieces measuring up to 80 cm in length and 30 cm in diameter. Here are some examples: Bearing shells and covers Engine components Gearbox components Shafts and axles Labyrinth rings Bearings, bearing units and bearing housings

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

The high sensitivity 1-channel thermopile detector is based on MEMS technology. The very high detectivity of up to 12.2*10^8 cm√Hz/W, as well as the high sensitivity of up to 501 V/W, are made possible by two factors. The radiation-sensitive thermocouples are aligned to a focal point. A krypton gas filling further increases the detectivity and sensitivity of the thermopile. The filter measures in the transmission range from 8 to 14 µm. This means that there is no absorption in the H2O bandwidth range. Influences due to humidity are excluded. These properties allow the use in demanding applications for non-contact temperature measurement in industry, like temperature monitoring of melting processes in the glass and plastics industry or temperature monitoring of engines and brakes in the automotive sector. The detector can be used at ambient temperatures between -20 and 85 °C. An integrated thermistor for intrinsic temperature monitoring can compensate external temperature influences.

Fränkische Industrial Pipes perceives itself as an international partner for developing technical sophisticated corrugated tubes, tubing systems and cable protection tubes as well as fluid systems for the automotive sector, household appliances, machine engineering and apparatus engineering and also for the industrial sector. In the field of agricultural and construction machinery, our offer includes blow-moulded parts made of plastic, drainage systems, fuel line systems, air intake systems, air guidance systems, windscreen cleaning systems and various types of tubes. The tubes and appliances are occasionally being exposed to strains and ambient conditions. That is why FIP sets a high value on product quality for their customized tubing systems.

The NDIR bundle N2O is made up of optimally matched thin film infrared emitters and a corresponding IR thermopile detector to measure nitrous oxide in gas mixes. The kit has a short delivery time and therefore achieves measurement results in a short time. This is especially an advantage for developers in research projects with a limited time span. The two-channel detector's optical filter has been optimized for the absorption spectrum of N2O (CWL: 4525 ± 20 nm / HBW: 83 ± 6 nm) and can provide important data, especially in the analysis of exhaust gases in the automotive, railway and marine sectors, the monitoring of industrial exhaust emissions and environmental monitoring.

The NDIR bundle N2O is made up of optimally matched thin film infrared emitters and a corresponding IR thermopile detector to measure nitrous oxide in gas mixes. The kit has a short delivery time and therefore achieves measurement results in a short time. This is especially an advantage for developers in research projects with a limited time span. The two-channel detector's optical filter has been optimized for the absorption spectrum of N2O and can provide important data, especially in the analysis of exhaust gases in the automotive, railway and marine sectors, the monitoring of industrial exhaust emissions and environmental monitoring.

The surface control optic UVO PM with LED illuminants is used for surfaces with high reflection. The high quality product is characterized by its durability, high efficiency and low heat generation. With the help of UV light, the light makes white defects on surfaces visible. Particularly in the automotive sector, it is suitable for: effect paints, textiles, plastics and other materials.

The LEDCCO is used for color matching of painted surfaces. It can be used to simulate virtually all daylight situations, which enable color various of different components to become visible. The LED color control optic is a color matching lamp according to DIN 6173-2 of grade 1 for light type D65. The color temperature is adjustable between 6.500 and 2.700 K. It is used in color matching booths, especially in the automotive sector. However, it is also used in color matching light laboratories, color matching tabletop booths and individual workstations.

The HiFocus 161i neo is the latest high-precision plasma cutting system for the cutting range between 0.5 mm and 50 mm. Equipped with the soft-switch inverter technology, it offers a wide range of possibilities for cutting and marking thin and medium-sized sheets. It meets the requirements of the metal and container construction industries, the engineering and automotive industries and many other sectors. The HiFocus 161i neo can be combined with 2D as well as 3D CNC-controlled guiding systems, i.e. gas cutting systems, robots and pipe cutting systems.

Due to our 25 years of experience we are able to produce high-class qualities on favourable terms in the field of tool manufacturing as well. You are looking for the optimal tool, that matches your needs and that keeps your costs low even in the long term? No matter whether we are assigned by automotive, electric or any other sector of industry: we are your tool partners! Let us counsel you individually and you will profit with our nice price-performance ratio soon. Besides multi-part press tools and by using modern CAD-techniques cutting tools we produce deep drawn tools, bending tools and fixture constructions for stamping, bending and drawing parts with a press capacity up to 2800 kN and a sheet thickness of 4.0 mm. Screw threads can be formed non-cuttingly up to M12 during the stamping process. Our tool maker craft tools routinely and professionally that bare a high complexity. Because we can use our experience of long duration in manufacturing precise tools, ...

Hitachi High-Technologies Europe GmbH is very pleased to introduce Hitachi Chemical products’ line-up such as film capacitors to automotive sector. Our film capacitors advantages are represented by superior level of endurance in high temperature and high humidity, while keeping following the automotive trend of the components’ downsizing. It perfectly fits any application with big capacitance, high voltage, high temperature endurance (in different types of characteristics), high ripple current performance. Therefore it can be successfully used in HID Lightning, DC-DC converter, Air conditioning, ECU and EFI applications etc. Moreover, it is well known that modern trend of automotive sector opens up our capacitor technology, satisfying EV, HEV and PHEV’s high density and high temperature power systems requirements.

Hitachi High-Technologiees Europe GmbH is very pleased to to introduce IGBT module to automotive sector. Quality improvement: Direct water cooling technology has been applied and continiously improved in this IGBT! Characteristics: SiC technology applied; Low thermal impedance due to direct liquid & air cooling; Reliability improvement using new bonding; High durability module; Temperature sensor on IGBT. "