Automatic pumps - Import export

The diaphragm pump with 12V motor for industrial applications. With a delivery rate of 11.3 l / min, the pump can be used universally as an automatic pressure water pump up to 3.4 bar.

Compact control systems with micro-processor technology for controlling STRATE sewage pumping stations with two pumps each and an installed motor rating of up to 5,5 kW per pump. Particularly suitable for building services engineering (twin systems) and do not require a separate control cabinet. Compact control system AWAmaster 2 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole Parallel operation of both pumps to cope with increased sewage volume (e.g. during heavy rain) LCD plain text display Thermal and electrical monitoring of the motors Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free

2DFmaster AWAcontrol control system for STRATE sewage pumping stations with two pumps each and an installed overall motor rating of 0.75 kW to 75 kW each. Particularly suitable for building services engineering and municipal applications (twin systems), offers outstanding ease of use and functionality of the AWAmaster technology also for pumping capacities over 4 kW. LCD plain text display Thermal and electrical motor monitoring Manual – 0 – Automatic functions Pump switch-off through switch-off point with run-on time Acknowledgement button Electronic monitoring of the motor current Forced switch-on, switchover and alternation of pumps Internal acoustic alarm Collective fault message potential-free and potential-bound Backwater alarm potential-free All settings and fault messages retained after power failure Operating hours counter High resistance to interference Simple operation Level recorded either by internal pressure transducer, external 4 – 20 mA probe or float switch

The compact control system with micro-processor technology for controlling STRATE sewage pumping stations with one pump and an installed motor rating of up to 5,5 kW. Particularly suitable for building services engineering (single systems) and do not require a separate control cabinet. Compact control system AWAmaster 1 in plastic housing Ready for connection with 1.5 m cable and CEE plug 16 A, 5-pole LCD plain text display Thermal and electrical monitoring of the motor Manual – 0 – Automatic function Pump switch-off through time or switch-off point Acknowledgement button Operating hours counter Ammeter Electronic monitoring of the motor current Forced pump switch-on Variable graduated start-up (switch-on delay) Internal acoustic alarm Collective fault message potential-free and potential-bound Flood alarm potential-free All settings and fault messages retained after power failure (battery back-up not required) Reserve inputs for float switch, telecontrol module

float inside the switch case Automatic float switch | for pumps 12 and 24 Volt | up to max. 15 Amperes

THE MOBILE HIGH-PRESSURE UNIT – A NEW APPROACH! With the first detachable high-pressure unit in the world, we’re making machining even more sustainably future-proof. A compact unit and installation options allow perfect space utilisation. Proven high-performance technologies in the modular system, such as automatic filter and eco+ regulating pump technology, ensure optimised operating costs and output quality at pressures of up to 300 bar.

Filltech's most advanced pumping technology: High-end CO 2/N 2O pump designed for automatic redundancy and fail-over Highlights Intelligent interoperability with any Filltech filling station Optimized energy consumption Complete plug & Play system ready for instant connection Safe operation through intelligent monitoring: pressure, temperature, leakage Low noise emission Application ready: filling, dozing, transfer, supply Joint pumps for flow-rates up to 6 tons Remote operations: Monitoring, remote control, power control Technical Data Capacity: 400 - 1500 kg/h, 6-25 lpm, 1.7 -6.6 gpm Power supply: 3 x 400V / 50 Hz, opt 120 / 208V, opt. 277 / 480V/60Hz, 3-phase Power consumption: 1.5 to + 4 kW/h (dep. on pump size) Dimensions (LxWxH): 900 x 900 x 1670 mm / 35 x 35 x 66 in. Pump Triplex plunger pump NP 25/50 – 25/70 Motor: Belt drive Construction characteristics CO 2 supply: liquid from tank system Ring- or stub lines Automatic start cycle Pressure supply needed for valve: 8 b

Paint stripping system Clean-o-mat RC - E The proven and solid single-chamber system for the automatic and efficient paint stripping of large and small components. The paint stripping of the products is carried out in the spray process using an appropriate organic bio stripper. Following this, the rinse occurs in a separate system. The PERKUTE-system: economically - environmental – effektive Basic equipment Compact and sturdy construction Made of stainless steel Simple operation Space-saving 3D-blast pipe system incl. fan nozzles Low water pressure switch as dry-run protection Suction filter made of stainless steel front of the pump Automatic steam extraction Electronic basket drive 2“ ball valve for the tank emptying Safety limit switch at cover Stainless-steel pump Technical data No lieability accepted for specifications, which are subject to alteration. Tailor-made machines to be quoted on request. Before and after pictures

Viavent® is a closed over-the-floor cycle system for the automatic pumping off of chips and coolants.

Gas-Pro of the company Crowcon is developed for protection in tight, dangerous areas. Gas-Pro offers display up to 5 gases in a compact, robust solution, which Resist tough areas and everyday use! Features of Gas-Pro Measurement up to 5 gases at the same time Clear dispay on top of the device, with two-coloured back lightening Internal pump (optional) Automatic, fail-safe detection of suction adapter Special mode for use before access Three-coloured safety- display Obvious alarm display: vibration alarm, signal tone >95dB and clearly visible red/blue LEDs Integrated, shock-proof casing with protection class IP65 & IP 67 against penetration of water and dust Suitable for use with newest gas test stations, for portable use, wall- or table assembly. Following gases can be measured (max. 5/device): Combustible gases (Ch4; 0-100%LEL) Chlorine (0-5 ppm) Carbon dioxide (0-5 vol.%) Carbon monoxide (0-500 ppm) Ozone (0-1 ppm) Oxygen (5-25 vol.%) Sulphur dioxide (0-10 ppm) Hydrogen...

As robust as cast iron, but as easy to operate as a smartphone that’s what Wöhler’s new flue gas analyzer feels like in your hand. Appropriately, the advantages are equally substantial: A tip with your finger on the Wöhler A 550 is all that is required to perform analyses, inspections and settings on residential and commercial appliances. The flue gas analyzer is equipped with coded connections for the 4 Pa test and even »NEW AND UNIQUE« a wood moisture content measurement function to VDI Guideline 4206 (VDI = Association of German Engineers). * Effective condensate protection * Automatic CO clean out pump protects CO sensor (Wöhler A 550) * 4-filter technology – easily accessible * Analyzer and sensor diagnostics * Sensor replacement – user-friendly * Rechargeable battery operating time: more than 12 h with Lithium Ion power * Hose assembly – robust and flexible