Automatic loading - Import export

The wide product throat in Weber Slicer 405 guarantees a high output, and the shear bar and side limit stop can be configured individually for the product width. Product change is manual and rapid, even with short products. Manual and automatic loading are available as options, and end pieces are ejected automatically. Thanks to Weber Hygiene Design, Slicer 405 is simple to clean. Options: Automatic loading Idle cut blade head Separate blade drive Clearance height infinitely adjustable Interleaver, Interleaver Speed Plus Portion designer

DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel DryLin® T - Technical data DryLin® T - Clearance adjustment DryLin® TWBM hand clamp DryLin® T - Design rules DryLin® T - Automatic clearance adjustment DryLin® linear guide systems in the cleanroom DryLin® T - Applications DryLin® T - System design DryLin® T - Installation videos System selection & service life calculation DryLin® T - Adjustable clearance The DryLin® T standard version is supplied preset and can be put into operation at once. The user can also manually adjust or fine-tune the clearance of the linear guide. The individual adjustment for your application, as well as the potential to respond to uneven screw surfaces through specific clearance allowance. DryLin® T - Adjustable clearance DryLin® T - Automatic DryLin® T carriages of the automatic version have a mechanism that automatically adjusts the bearing clearance after removal of the preload key. In case a bearing clearance of more than 0.13 mm has to be adjusted during operation, the bearing clearance automatically resets itself when the carriage is completely unloaded. DryLin® T - Automatic DryLin® TW-HKA manual clamp The manual clamp has been developed for simple tasks. The creep behavior of the clamped plastic causes a slackening in clamping force over time (up to 70%). Therefore safety-related parts should not be clamped. Please approach our applications consultant if you require other options for the clamping. DryLin® T - Manual clamping Drylin® T - Heavy Duty This series is used for the most extreme conditions such as dirt, adhesive residues, chips, mud, etc. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore non-detachable. This system is compatible with many standard commercial recirculating ball bearing systems and is available in the following sizes: TW-01-20, TW-01-25 and TW-01-30. DryLin® T Heavy Duty DryLin® T - Low-profile guide The clearance is not adjustable for the DryLin® T low profile guide rails. The gliding elements are mounted with positive fit in the chromated zinc carriage. This simple and effective design enables guides that are rugged and low-priced at the same time. DryLin® T - Low-profile guide DryLin® T - Compact linear guide This compact linear guide is suitable for rugged use (without clearance adjustment). This system has a slim design and the same dimensions as conventional recirculating ball bearing systems. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore undetachable. Suitable for DryLin® T guide rail of installation size 20. DryLin® T - Compact linear guide DryLin® TWBM - Manual clamping with high holding force This manual clamping is designed for a long-lasting high holding force of up to 500 N per clamping element. DryLin® TWBM hand clamp DryLin® T clamping elements for rail guide DryLin® T clamping elements for fast positioning by hand or with pneumatics. DryLin® T clamping element DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel Advantages: 100 % lubricant-free Adjustable bearing clearance Automatic clearance adjustment High static load capacity Service life up to 50,000 km without lubrication High dirt resistance Low vibration and low noise When not to use ? When you want to save installation space drylin® N drylin® W When you need a pure stainless steel solution drylin® W drylin® R When you want to construct as economical as possible drylin® N drylin® W

max. size 125 x 165 cm age 2012 automatic loading system can be used for rear- or front table loading pile height 180 cm Delivery time: immediately from stock Ref: BA180384A Please ask for price. We ship and install worldwide!

max. size 125 x 165 cm age 2012 automatic loading system can be used for rear- or front table loading pile height 180 cm Delivery time: immediately from stock Ref: BA180385A Please ask for price. We ship and install worldwide!

The load cell measures the compression forces between the circular contact surfaces of plunger and tool. The pin on its top side and hole on its lower face are simply provided for mechanical fixing and centering the components correctly. To provide as large a range of mechanical compatibility as possible, the pins/holes are available in different diameters. Attachments are available which clamp onto the press sensors to enable easy mounting of displacement sensors according to the circumstances of use. FEATURES: — Measuring ranges from 0 … 100 N up to 0 … 25 kN — Small, compact design — Pin/hole diameter from 8 mm to 16 mm — Different diameter for pin and hole can be combined — Mechanical overload protection for all measurement ranges

Electro-pneumatic design Automatic load balancing Capacity max. 250 kg The LEMM RWME reel turner is also available in special designs for over-sized and heavier reels.

Mechanical design Automatic load balancing Optional with external clamps for telescoping materials Capacity max. 150 / 250 kg The RWM-L reel turner allows for the problem-free changing of mandrels for various sleeve diameters.

Available in different sizes and for film webs from 310 mm to 610 mm. Optionally with roller knife cut for soft blisters or die-cutting tool for hard blisters. Additional equipment options for online printing, vacuum, MAP, automatic loading system and much more.

width 137 cm age 2008 computer control with monitor touch screen colour screen air table metallized 2 side tables (metallized) Transomat TR 150 BL 3 - automatic loading system rear table loading Transomat TR 130-ER 4 handling from left to the right power supply 3 x 220 volts / 50 cycles Delivery time: shortly Ref: PO240103A Please ask for price. We ship and install worldwide!

Helping hand: Lifter for placing profiles on roller tracks or loading magazines. Pneumatic lifting and feeding of profile bars by conveyor belt Adjustable stops to place the bar to correct position. Function: The bar is pushed against a contact surface – the bar lift up automatically and feed to load. Automatic lowering when position is reached. Belt speed: 9m/min Belt dimension: width 50mm, length 1400mm Lifting stroke: 250 – 1350mm adjustable Max. Profile weight: 90 kg

The compact SmartLoader is a fully automatic side loading system for single products or individual portions. Its features and capacity are optimized for sliced products. The SmartLoader can be combined with many slicers and portioners. Advantages Flexible Simple handling Hygienic Portions, groups, forms format sets, overlaps products Infeed operation – format sets, portions, individual slices or pieces

This high performance computer-controlled machine provides maximum economic efficiency at treatment of big batch volumes at high throughput! The comfortable operator features on newest level leave no wish unfulfilled: touchscreen operation, USB/SSD hard disk, network connection (support via internet), recipes memory, user management, logging/documentation/traceability and optional barcode scanner/ID key. At any time, this machine is ready for upgrade to automated application, from the automatic loading & deloading of the machine up to a complete full automated feeding & forwarding system. For industry 4.0 demands, the E90 is best prepared. Standardwise, a monitoring of the processing data via network is possible also from an external working place. On option, the control via OPC-UA server is possible, too. Furthermore, this machine is able to perform cryogenic deburring without need of blasting media (drum-only deflashing), suitable for special applications only.

The Mini Shaft Loader allows you to load short shafts. The loading is done automatically. Do you have remnants of long bar feeder and would you like to process them? Or do you want to load very short shafts automatically? The MSL is the ideal complement for the Multi-3000 to load short shafts. It has a multi-profile loading prism. So you can load round and hexagonal material and all this without changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and control of the loading system. The material is fed via the slide of the loading magazine.

Loading processes require smooth material flows. For this reason, designers and planners throughout the world rely on LAWECO loading lift platforms due to their robust design and unlimited functionality. Our modular design allows us to offer economical loading lift platforms meeting your specifications with short delivery times and, of course, with the proven LAWECO quality and maximised built-in safety. • all-round steel structure • hydraulic loading bridge • automatic levelling function

An idle cut blade head with automatic cutting gap adjustment ensures that the Weber Slicer 604 has a high yield with minimum giveaway. The product throat can be adjusted automatically in height and width, and the fully automatic central loading unit ensures rapid product changes. Products up to 1,700 mm in length are fed in automatically and processed at up to 600 slices per minute. The shear bar and side limit stop can be configured by motor and with programme control. That allows the Weber Slicer 604 to guarantee a precise cut and placement of perfect slices continuously. Options: Slice folder Variogripper Idle cut blade head Separate blade drive Interleaver Portion designer

The microhardness testers of the UHL VMHT series provide semi- or fully-automatic low-load Vickers or Knoop hardness testing from 1 g to 2 kg. Using brilliant Leica optics and a high valuable load mechanism with fixed weights to apply the test force, repeatable and long time stable results are achieved. Even the basic model is equipped with a user friendly motrized turret, an optical focus helper and motorized load selection.

The RML labeling machine is suitable for wrap-around labeling of non-rigid cylindrical products - ampoule, cartridge, syringe labeling. The products are transported to the labeling station, which fixes the label on the circumference, by means of an intermittent roller conveyor. The labeling system is suitable for products such as ampoules, cartridges, lipsticks, syringes and vials and is therefore suitable for the pharmaceutical, medical technology, cosmetics and food industries, where reliable labeling and control processes are extremely important. Deviations and errors here can lead to life-threatening situations. From manual loading and unloading to fully automatic loading and subsequent collection of the products, this model is modularly expandable. Particularly narrow products such as ampoules or cartridges can also be processed using format sets (RML-FS).

These rack and pinion hoists with steel segment masts have earned their good reputation over the years being a reliable partner for construction workers. Their spacious load platforms offer enough space for two wheelbarrows or large pallets as well as fixing devices for bulky construction materials. The steel mast system allows for easy assembly from the platform up to a height of 100 m. Safe unloading of the transported materials is granted by the platform's being able to be turned by 90°. Loading at the base unit is carried out parallel to the building. This can be very space saving and a decisive feature on narrow construction sites! A patented mono-axis trailer for transporting and automatically putting down/ loading the hoist is offered as accessory. The GEDA 500 Z Duo is available with load-through and rotable platform.

These shock absorbing units are repeatedly resilient and are supplied ready for assembly and incl. screw. SHOCK ABSORBING Elements DEFORM plus ® R/RMP Reusable buffer for absorption of kinetic energies without additional spring. The casing combines the function of a spring and a damper. It can be reused after a dynamic load. Dependent on the velocity, the maximum supporting load automatically adapts to the impact energy, which means that i.e. equal masses are retarded more softly at lower velocities. Working temperature: -10°C up to +50°C. Ambient conditions: The material is resistant to Bleach liquor 3% Sugar solution 30% Hydrogen peroxide 10% Ammonia 5% Acetic acid 2% Formic acid 2% Linseed fatty acid Tannic acid solution 20% Lubrication grease and oil A continuous contact with water should be avoided. In accordance with DIN 4012, building material class 2, the material is classified as non-combustible, dripping (off).

Due to the guidance at the fastening screw this version allows additional light lateral forces. SHOCK ABSORBING Elements / DEFORM plus ® R/RMP Reusable buffer for absorption of kinetic energies without additional spring. The casing combines the function of a spring and a damper. It can be reused after a dynamic load. Dependent on the velocity, the maximum supporting load automatically adapts to the impact energy, which means that i.e. equal masses are retarded more softly at lower velocities. Working temperature: -10°C up to +50°C. Ambient conditions: The material is resistant to Bleach liquor 3% Sugar solution 30% Hydrogen peroxide 10% Ammonia 5% Acetic acid 2% Formic acid 2% Linseed fatty acid Tannic acid solution 20% Lubrication grease and oil A continuous contact with water should be avoided. In accordance with DIN 4012, building material class 2, the material is classified as non-combustible, dripping (off).

Metzner provides a number of proven automation solutions for the automatic loading and unloading of coating carriers for CVD and PVD coatings. The abbreviations PVD (Physical Vapour Deposition) and CVD (Chemical Vapour Deposition) stand for different coating processes. When loading the PVD spears, we differentiate between "single-loading" and "back-to-back loading". In addition to part loading, spacers are loaded onto the spears in addition to the parts. In single-loading, a spacer is located behind each individual insert, whereas in back-to-back-loading, two inserts are placed "back to back" and only then is a spacer loaded. To implement "back-to-back-loading", a turning station is integrated into the machinery. This station is used to turn the corresponding insert by 180 degrees, loading it directly onto the respective spear.

The Metzner special development department produces endotracheal tubes with high precision and cleanliness. This is ensured, among other things, by processes such as automatic loading, alignment and positioning of the tubes, processing by seven consecutive work stations and automatic quality control by sensors. Our product video will give you an insight into the machining process. Maschinenbau GmbH has sustainably reduced the production costs of the end products and created additional production capacities with a fully automatic production system for endotracheal tubes.

The "Metzner RPA 10-SL" is a powerful and flexible press automation system for handling indexable inserts and small ceramic parts for medium to large batch sizes. It has an integrated magazine system for up to ten sintering inserts. Empty sintering inserts are automatically removed from the magazine, loaded and then returned as required. In this way, the powder press automation works independently over a longer period of time without loading and unloading processes leading to a press stop. With its integrated 4-axis SCARA robot, the machine achieves very high system speeds of up to 30 stroke/min. The "RPA 10-SL" is operated conveniently via the integrated control or via the mobile operator terminal. At the push of a button, loaded sintering plates are removed and new ones received. Defined operating data are transferred to the press control via an interface.

Metzner powder press and indexable insert automations of the "RPA 3-SC series" automatically remove pressed blanks from a powder press and deposit them quickly and gently in a definable sample. In the "RPA 3-SC1", the transfer of the individual sintering plates and the loading of the blanks is carried out by a SCARA 4-axis robot. The empty sintering plates are placed manually into a sintering plate magazine, removed with a sintering plate gripper if necessary, and fed to the loading position. The robot then moves to a gripper station, deposits the sintering plate gripper, picks up a part gripper, and starts loading the sintering plate. In the "RPA 3-SC2", sintering plates are placed manually on a double conveyor belt. One sintering plate at a time is automatically transported to the loading position via the conveyor belt. The robot immediately starts to load the blanks. Loaded sintering plates are ejected from the loading position and manually removed from the conveyor belt.

PicoFill Add-on is a very compact and flexible filling system for CO 2 / N 2O in combination with other Filltech systems like uniFill. Highlights Easy, precise and safe to operate For operation in combination with other Filltech systems Individual solutions on demand Optionally available with integrated pump or for central pumping supply Different attachment parts and filling adapters for the filling of several cylinders in the indicated weight range Additional case for accessories and tools Short set-up time for changing parts Technical Data Filling-range: approx. 50 g - 6 kg/ up to 13 lbs. fill weight Weighing-range: up to 15kg / 35 lbs. Scale division: 0-7 kg -2 g, 7-15 kg - 5 g Dimensions: approx. 600 x 400 x 1200 mm/ 24 x 24 x 47.5 in. Weight: approx. 50 kg/ 110 lbs. Weighing System Two load cells Automatic tare setting Automatic shut-off at target weight Legal for trade Technical Data Filling-range: approx. 50 g - 6 kg/ up to 13 lbs. fill weight Weighing-range: up to 15kg / 35

Avery compact and flexible filling system for CO 2/N 2O in combination with other Filltech systems like profiFill or uniFill. Highlights Easy, precise and safe to operate For operation in combination with other Filltech systems Individual solutions on demand Optionally available with integrated pump or for central pumping supply Different attachment parts and filling adapters for the filling of several cylinders in the indicated weight range Additional case for accessories and tools Short set-up time for changing parts Technical Data Filling-range: approx. 50 g - 6 kg/ up to 13 lbs. fill weight Weighing-range: up to 15kg / 35 lbs. Scale division: 0-7 kg -2 g, 7-15 kg - 5 g Dimensions: approx. 600 x 400 x 1200 mm/ 24 x 24 x 47.5 in. Weight: approx. 50 kg/ 110 lbs. Weighing System Two load cells Automatic tare setting Automatic shut-off at target weight Legal for trade Technical Data Filling-range: approx. 50 g - 6 kg/ up to 13 lbs. fill weight Weighing-range: up to 15kg / 35 lbs. Sca

Modern system technology helps ensure more efficient processes. This helps to increase system performance and optimize raw material consumption, while ensuring compliance with production specifications. We develop, build, and install systems for circuit board production worldwide, providing maintenance and replacement parts for most existing systems. Processes we have handled include treatment systems for circuit board plating lines (pattern and panel plating, including in reverse pulse plating technology), as well as systems using dipping basket technology for chemical treatment (including ENIG nickel/gold, ENEPIG nickel/palladium/gold, or immersion tin). We have designed lines ranging from multi-row lines with hoists, including for double goods carriers, and integrating automatic loading and unloading stations with customized frame and chamber solutions.  

The Overfill Prevention Controller EUS-2 is the central part of the overfill prevention system according to European VOC Directive 94/63/EC and American API RP 1004. EUS-2 monitors the level sensors at the tanker compartments, the truck grounding and the vapor recovery connection. The filling process is interrupted immediately at the loading gantry, if a critical situation is detected. The controller is able to detect the type of truck installation and activates the required operatingmode automatically. This interoperability allows to load trucks of different carriers.

Welcome to our industrial document shredder area. These high-performance document shredders shred very large amounts of paper, media and other data carriers in a single pass, making them perfect for an office building. The waste is normally transported from the individual departments to the document shredder and shredded there at a fixed location. These industrial document shredders shred between 100-2100 kg of paper waste in one hour. Some models can shred bulky objects as well as complete folders with metal inserts. Industrial document shredders can usually be equipped with automatic loading and a conveyor belt. Financing options are available for all industrial document shredders (please give us a call). If you have thousands of documents or large quantities of paper in your warehouse every month, then our industrial document shredder is just right for you.