Arc welding - Import export

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free

Protection of surfaces of all kinds and welding nozzles for oxyacetylene gas and inert-gas arc welding Prevents baking on of weld spatters on surface and welding nozzle Advantages and benefits Later painting over, metallising and printing following prior cleaning easily possible Environmentally friendly, non-combustible Silicone-free Can be removed residue-free OKS 1600 is also suitable for use with the refillable Airspray system Also available as spray version OKS 1601

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

Mould parting agent for entire range of plastics processing if an adhesion-dependent further processing requiring silicone-free parting agent is carried out Welding parting agent for arc welding and inert-gas arc welding As nozzle spray for extended service life of welding nozzle and keeping nozzle opening clear on automatic welding units As workpiece protection against baking and burning on of weld spatters Advantages and benefits Silicone free release agent with high effective substances from renewable primary products Prevents from burning in of spatters at welding nozzles, on workpieces and robots and increases the lifetime of the welding torch Builts up an evenly thin, nearly dry film, no creation of pores Enables the fast change and cleaning of the welding nozzle Easily washable with OKS 2650 Additional painting, metallising and printing after prior degreasing without any difficulties possible

Piping and hoses, for example steel bottles, compressors, breathing devices, oxyacetylene gas and inert-gas arc welding devices and burners Fittings, flanges, valves, screwed connections, soldered and welded connections of pressure gas systems and lines Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Advantages and benefits Acts non-corrosive Allows direct visual inspection of the leakage point through bubble formation Tested by the DVGW in accordance with DIN EN 14291 Suitable for spraying overhead

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

Piping and hoses, for example steel bottles, compressors, breathing devices, oxyacetylene gas and inert-gas arc welding devices and burners Fittings, flanges, valves, screwed connections, soldered and welded connections of pressure gas systems and lines Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Advantages and benefits Acts non-corrosive Allows direct visual inspection of the leakage point through bubble formation Also available as spray version OKS 2801 Spray version tested by the DVGW in accordance with DIN EN 14291 Spray version suitable for spraying overhead

The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device

The model K 26 is a robust stud welding gun, especially for studs ø 22 – 25 mm Ideal for welding shear connectors SD 25 mm Ideal for through-deck-welding td Most suitable for long shear studs Adjustable hydraulic plunge damper Standard support with 3 legs Body: fibre-glass reinforced polyamide Lifting ring system with length compensation up to 8mm Control cable plug (4 wire) Optimal Integrated shielding gas device

The model K 24 is a robust stud welding gun, especially for studs ø 19 - 22 mm Ideal for welding shear connectors Ideal for through-deck-welding td High repeatability Hydraulic plunge damper Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Ideal for shear studs and threaded studs High repeatability Hydraulic plunge damper Standard support with 2 legs Body Polyamid Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Best for stud welding using shielding gas ø 3 – 16 mm High repeatability Standard support with 2 legs Body made of fibre-glass reinforced polyamide Compensation for stud length variations up to 8mm Control cable plug (4 wire) Stud welding with shielding gas: optional

Weldable stud range 3–12 mm Resistant body Designed for welding on building sits

The model SK14 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 4–12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body Polyamid Control cable plug (4 wire)

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

— GMAW standard and pulsed welding — Synergic characteristics for steel, CrNi and aluminium — MMA welding and TIG liftarc welding — Perfect for welding self-shielding flux cored wires — Infinitely adjustable arc dynamics (choke effect) — Synergic or manual welding operation — Interval welding — Adjustable gas pre- and post-flow time — Portable, compact — Saves power through highly efficient performance — Robust casing suitable for construction site use — 4-roll drive for 0.8 mm and 1.0 mm steel wires — Easy, tool-free change of welding polarity — IP23 spray water protected — Wire spool diameter up to 200 mm/D200 — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Free WPQR package for certification up to and including EXC2 in accordance with EN 1090 and for welding of unalloyed steels up to and including S355

— Gas-cooled DC TIG inverter welding machine — TIG welding with high frequency starting — TIG lift arc welding without HF — MMA welding — MMA pulse welding and pulsed TIG welding up to 2 kHz — Reduced secondary current accessible using torch trigger — Adjustable up-slope/down-slope — Adjustable gas pre-flows/post-flows — Adjustable hot start current and hot start time — Adjustable Arcforce — Antistick function — Energy-saving thanks to high efficiency and standby function — Portable, including shoulder strap — 3.5 m mains supply lead with 16 A shock-proof plug — Mains connection 230 V/16 A — High mains voltage tolerance +15%/-40% and therefore fully generator-compatible — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

— MMA inverter welding machine with degaussing function and reversing switch — MMA /MMA pulse — TIG lift arc / pulse — GMAW (MIG/MAG) welding with Pico drive 4L or Pico drive 200C wire feeder — Arcforce, Hotstart, Antistick — CC / CV characteristics — Suitable for flux cored wire welding — Welding polarity can be reversed by pressing the button polarity reversing switch — Stick electrode/MMA cellulose electrodes: 100% safe for vertical-down welding

Metalworking companies are increasingly looking for practical solutions on how to quickly and easily carry out welding tasks. For small quantities, however, automation systems for welding have so far been difficult to implement, from an economical point of view. At the same time, it is becoming increasingly difficult to find qualified welders for manual processing. OTC DAIHEN EUROPE has developed EASY ARC, a new mobile welding robot system for workshop operation, which meets the economic and pragmatic requirements. EASY ARC includes a compact welding robot with intuitive OTC Easy-Teach control, which offers the operator with the perfect weld seam, thanks to the integrated expert system and manufacturer’s own 400A MIG / MAG power source inverter. The robot is mounted on a welding table that is prepared for holding standard clamping elements and equipped with rollers. The simple conversion of the system thus ensures appropriate flexibility in production.

With the properties of the new DT300P digital power source, TIG welding can be significantly simplified: There are numerous options in a compact 30 kg unit. With a multitude of pulse options, the device can be ideally set for different tasks: A controlled heat supply ensures optically clean and even seam structures during low-pulse welding (up to 20Hz) - especially with different material thicknesses. The high arc stability in high-pulse welding (from 20 to 500 Hz), on the other hand, is demonstrated in the lower current range, especially in thin sheet metal applications: welding can be carried out without any problems from a material thickness of 0.3 mm. The robust 80 kHz IGBT inverter stands for reliability and extreme arc stability - even with low currents. The digital control panel, which is designed for rough industrial use, offers many advantages for the user.

The 7-axis arc welding robot V6LS from the FD series impresses with its slim design and an expanded degree of freedom, which enables a constant torch orientation when immersing in tight work spaces. Compared to the V6S, the V6LS has an extended arm, which is why the range is increased again. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2006 mm Max. payload: 6kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 6000 W Weight: 316 kg

Welbee W400: Precise adjustment and arc stability – even in the lower welding area* Precise adjustment of energy input due to AC pulse welding process * High-speed AC pulse welding due to improved features for the respective material * Welding shape looks like TIG welding process due to AC wave pulse technology * High melting rate, weld penetration control * Extended application scope due to 400 A at 40% rated duty cycle

The new arc welding robot FD-V8L with a refi ned design can handle all welding tasks and payloads of up to 8 kg. Due to its outstanding arm length, it is particularly suitable for large working areas. Faster cycle time: Designed for highest industrial speeds. Slim Design: Thanks to the slimmer lower arm design, less rotary motion is needed to reach the working position, thus preventing collisions with jigs and workpieces. User-friendly operation: Even the cables required for SynchroFeed are integrated into the lower arm, which prevents interference behind the robot arm. Stronger structure: Maximum payload now up to 8 kg. The use of different torches and sensors is possible. The main technical specifications at a glance: Number of Axes: 6 Max. payload capacity: 8kg Working Range (P-Point): R2006 mm Positional repeatability: +/- 0,08 mm Drive System: AC Servo Motor Drive Power: 5000 W Weight 273 kg

The new arc welding / handling robot FD-B6 with integrated cable routing and further developed design is designed for all welding tasks and payloads up to 6 kg. Even the connections and cables required for the SynchroFeed welding process are pre-installed. Due to its outstanding arm length, it is particularly suitable for large work areas • Higher clock speeds for highest industrial speeds • Slim design: Integrated wrist motors prevent malfunctions from devices and workpieces. • User-friendly: Integrated supply lines prevent faults behind the robot arm. • Suitable for up to 6 kg payload capacities. Ideal for corresponding handling applications. Number of axes: 6 Max. payload capacity : 6 kg Working Range (P point): R 1445 mm Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3132 W Weight: 278 kg

The new arc welding / handling robot FD-B6 with integrated cable routing and further developed design is designed for all welding tasks and payloads up to 6 kg. Even the connections and cables required for the SynchroFeed welding process are pre-installed. Thanks to higher process speeds and shorter cycle times, the FD-B6 fulfills all requirements for the most demanding handling tasks. • Higher clock speeds for highest industrial speeds • Slim design: Integrated wrist motors prevent malfunctions from devices and workpieces. • User-friendly: Integrated supply lines prevent faults behind the robot arm. • More stable construction: 1.5 times the load capacity for welding tasks with different ranges. Number of axes: 6 Max. payload capacity : 6 kg Working Range (P point): R 1445 mm Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3132 W Weight: 145 kg

The 7-axis arc welding robot V20S from the FD series is the optimal robot for medium-heavy loads. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1710 mm Max. payload: 20kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 6600 W. Weight: 321 kg

The 7-axis arc welding robot B4LS from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. In addition, the FD-B4LS offers an extended arm compared to the FD-B4S and thus a larger working radius. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P-point): R 2008 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 5650 W Weight: 321 kg

The 7-axis arc welding robot B4S from the FD series is compact and, thanks to the integrated cable routing, offers optimal protection during the work process. The extended degree of freedom enables a constant torch orientation when immersing in tight work spaces. Due to the high flexibility, several robots can be positioned closer to each other, so it is possible to have a larger number of robots in the cell or system working together. The most important technical data at a glance: Number of axes: 7 Working Range (P point): R 1435 mm Max. payload: 4 kg Positional repeatability: +/- 0.08 mm Drive system: AC servo motor Drive power: 3550 W Weight: 189 kg