• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • anchor installation

Results for

Anchor installation - Import export

Germany

Germany

Verified by Europages

round bolts are a reliable and easy-to-install ground anchoring solution is indispensable in many situations, be it for the secure fastening of tents, scaffolding, posts, pavilions or for construction fences in the ground. Just pre-drill, screw in, done!

Request for a quote

Germany

Use one of these collars to seal up an anchorage point with or without an additional supporting tube (Ø 16 und Ø 42 mm). This sealant collar is available in two finishes for use on a bitumen roof surface: Sanded or slated. The disc is 420 mm in diameter. We supply this collar with matching shrink tubing. Seal for bitumen roof surfaces Sanded or slated For Ø 16 mm and Ø 42 mm rods Shrink tubing included Disc diameter Ø 42 cm

Request for a quote

Germany

Simply screw this sleeve onto an ABS-Lock X-Durch anchorage point to facilitate installation: Thanks to this installation aid, you can simply pull the anchor up through the bore hole to complete the installation. Installation aid for installing an ABS-Lock X-Durch anchor Designed for pulling up the counter plate

Request for a quote

Germany

Use this expandable telescopic rod to access anchorage points that are difficult to reach from a safe zone, for example anchors installed in the ceiling over a window. This telescopic rod is equipped with a device for hooking the carabiner of your PPE equipment up to the anchor - or for detaching it when you are done. Extendable telescopic rod, incl. bracket for hooking up a special DBI carabiner - specially designed to attach your PPE to an anchorage point located high up Standard lengths: 58 - 98 cm 160 - 290 cm 210 - 390 cm Material: Aluminium/plastic Also suitable for the DBI versions of our ABS B-Lock 3.5 - 6m and ABS Lanyard - Guided type fall arrester models

Request for a quote

Germany

Particularly robust stainless steel anchorage point with a screw-on supporting tube (Ø 42 mm), base plate (200 x 200 mm) and counter plate (100 x 100 mm). This anchor can be installed in a ceiling, on a facade, on a hollow profile or in lightweight concrete to secure 3 individuals. It can also be implemented as a trouble-free end support in a lifeline system. EN 795:2012, A + CEN/TS 16415:2013 Suitable for installation in a ceiling, on a hollow profile or in lightweight concrete Incl. stainless steel installation set Optional: Installation aid ABS-Lock X-DURCH Sleeve

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

This stainless steel anchorage point (Ø 16mm) and base plate (290 x 200 mm) were developed for usage on a warm roof. The anchor is easily installed from above using the 4 specially prepared toggle bolts included in the package. EN 795:2012, A + CEN/TS 16415:2013 Trapezoidal sheeting (positive/negative), steel ≥ 0.63 mm Warm roofs, distance between the bores: 180 to 250 mm incl. specially prepared toggle bolts Add a supporting tube for usage as an end or corner post in a lifeline system

Request for a quote

Germany

This stainless steel anchorage point (Ø 16 mm) - specially designed for wooden surfaces - is attached to a load-bearing beam and accordingly countered. The anchor can be installed laterally using the angular plate supplied. Our standard package also includes 2 threaded bolts and matching nuts. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation 2-hole system for flexible installation For load-bearing wooden structures Minimum beam dimensions: 100 mm x 120 mm Incl. stainless steel installation set

Request for a quote

Germany

Thanks to its angular bracket, this stainless steel anchorage point (Ø 16 mm) can be quickly and easily installed in a lateral position. The 2 anchor rods included in the package are permanently installed in the concrete subsurface using a special two-component adhesive. Once installed, this anchor is suitable for all directions of load. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation 2-hole system for flexible installation Concrete ≥ C20/25 Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

Request for a quote

Germany

This compact aluminium anchorage point is simply clamped onto a rounded-edge seam - completely penetration-free. Its freely-rotating anchorage eyelet is used to protect 1 individual from falling. As it is so quick and easy to install this anchor, it is ideal as a temporary solution. EN 795:2012, B Clamped design - completely penetration-free Mounted on a single seam Aluminium thickness ≥ 0.7mm e.g. BEMO or similar Incl. installation set

Request for a quote

Germany

• Seat principle, direct actuated; • Frictionless movement Spider µProp-valves are real proportional valves, in which the armature stroke is proportionally defined by the infinitely-variable current applied. The constant ratio between armature stroke and flow rate thus allows variation of the flow rate by way of the applied current. Spider µProp-valves are like Spider on/off valves microvalves The anchors installed in the micro valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. These valves have a capacity of up to 4 billion actuations, depending upon operation mode.

Request for a quote

Germany

• Sizes: Ø 7 mm, Ø 15 mm, Ø 21 mm; • Application: Neutral and mildly aggressive liquids, gases and vapors; • direct actuated; • 2-way valves and 3-way valves, NC; Spider valves are allocated to the micro valve category (outside diameter 7 mm). The anchors installed in the micronized valves have the shape of a disk. In energized status, this so-called flat armature is pulled against the magnetic yoke component group. If the coil is deactivated, the leaf spring joined to the flat armature presses the seal positioned on the spring-armature assembly unit against the valve seat. These quick-acting valves owing to the small mass of the installed armature achieve switching phases in the millisecond range. As these valves predominantly featuring cartridge connections have an almost frictionless armature movement, they have a capacity of up to 4 billion actuations, depending upon operation mode. Spider valves may also be triggered via so-called pulse width modulation.

Request for a quote

Germany

Adapter RSAM80 & RSAMG80 Bridge construction and bridge monitoring Tunnel construction Earth and rock monitoring – e.g. steeply upwards or along the slope Enables measurements and monitoring from virtually any angle, where space is tight and on hard-to-reach areas The clip system allows the original measurement point to be restored both quickly and cheaply in the event of damage. Many measurements can be carried out within a short time when used with up-to-date total stations. Drilling is no longer required as pre-installed anchor sleeves for Dw15 threads can be used for mounting Anchor sleeves can be installed during the construction phase for survey points, e.g. above and below the bridge support, in the case of retaining structures and in many more applications. Material: Stainless steel V4A Temperature and UV-resistant Crosshairs are imprinted on the backing plate under the exact centre of the reflective target to ensure the survey point is durably marked. If the reflective t

Request for a quote