Results for
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Aluminium CNC milling part in black anodize finish Tolerance:+/-0.05mm, Critical holes and threads Surface rougness:Ra1.6 CNC Machining parts, Machining in Aluminium stainless steel,brass,copper, titanium,POM and so on. Aluminium housing, Blocks, flanges, valve seat, supporter CNC Turning parts ,Machining in Aluminium stainless steel,brass,copper, titanium,POM and so on.
Request for a quoteQUELLTECH GMBH
Germany
Particular Challenges of the Application: By tactile equipment, determination of the deepest point on a rough metal surface is neither simple or precise. As a consequence, often either too much material is removed, or the surface is still covered with defects which have to be eliminated by a following milling cycle. The equipment is arranged in parallel, so that the complete width of the slabs is covered. The sensors are calibrated to a common coordinate system and mounted on a movable gantry. Before measurement, the slabs are fixed in place. The scanners mounted on the gantry are guided over the measuring object, driven by an electric motor. The point cloud recorded by the four scanners is consolidated in a PC by means of the QuellTech image processing software which calculates the difference between highest and lowest point of the corresponding surface and compensates for possible inclination of the slab (detrending).
Request for a quoteQUELLTECH GMBH
Germany
QuellTech Solution: The performance of a manual inspection cannot be compared with the speed and the repeatability of a contactless QuellTech Q4-1000 laser scanner. It is even possible to install several instruments in parallel to cover the whole width of the ingot with one single scan. These instruments are mounted on an existing portal and correctly synchronized, so that interaction of the laser light originating from the other scanners is excluded. The QuellTech laser line scanners produce 3D point cloud of the raw ingot surface, and the software calculates the coordinates of the highest and deepest levels of this surface. After scalping the flat surface can be scanned again for any defects. Benefits for the Client: Thanks to QuellTech’s wide area laser line scanners, the cycle times for ingot scalping could considerably be reduced, and excessive material scrap due to a too low scalping level is prevented.
Request for a quoteROLLON GMBH
Germany
The Hegra Rail family includes various telescopic guide profiles with ball cage capable of handling high loads up to 20 kN per pair, overextensions up to 200% of the length of the guide in closed position and available in different materials such as steel, aluminium or stainless steel AISI 304 and AISI 316. The main features of the Hegra Rail telescopic guides: handling of heavy loads combined with minimal bending profiles with 1, 2 or 3 moving elements for extensions up to 200% available in different materials: steel, aluminium, stainless steel AISI 304 and AISI 316 high rigidity and moment of inertia with thin sections fluid noiseless operation long working life extremely reliable The Hegra Rail family of telescopic guides includes five product categories: partial and full extensions, overextensions, heavy loads and S-sections. Telescopic guides for partial extensions,Telescopic guides for full extensions,Telescopic guides for overextensions,Telescopic guides for heavy loads
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteWALTER SCHMIDT CHEMIE GMBH
Germany
Cleans, cares for and protects matt or brushed surfaces made of stainless steel and aluminium. Removes water stains as well as grease and tarnish stains and makes fingerprints and oils disappear without leaving any residue. Other sizes available on request
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Special thread reducers in aluminum or steel.
Request for a quoteBÜRKLE GMBH
Germany
Easy-Click closure - stop-it can be opened and closed in any position - without tiresome screwing on and off. High quality material - stop-it made from the heat resistant and chemical resistant plastic PVDF. The clamp is galvanised steel. The hose clip can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the hose clip stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.
Request for a quoteWALTER SCHMIDT CHEMIE GMBH
Germany
Removes heavy soiling from tire and brake abrasion as well as tar and road dirt. The color indicator makes cleaning easier by highlighting unclean areas. Other sizes available on request
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Turned connecting elements, reducers, nipples, sleeves, grommets, plugs, plugs made of steel, aluminium, brass, stainless steel Blank, anodised, nickel-plated, chrome-plated, galvanized.
Request for a quoteAAAGILER GMBH
Germany
Various coil mats for different coil sizes on offer (made of plastic or steal)
Request for a quoteBÜRKLE GMBH
Germany
The materials steel and aluminium ensure that the tubing clamp stop-it metal is extremly heat resistant and sturdy. The tubing clamp is available in four different sizes, for hose diameters up to max. 30 mm. The tubing clamp can be used wherever the flow in hoses with liquids or gases needs to be regulated or stopped. Stepless flow regulation: With the tubing clamp stop-it's knurled screw, a stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged.
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
— steel housing, aluminium flange — other ratios, output shafts and connections on request
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
— steel housing, aluminium flange — other ratios, output shafts and connections on request
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
— steel housing, aluminium flange — other ratios, output shafts and connections on request
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
— steel housing, aluminium flange — other ratios, output shafts and connections on request
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
HONSEL-GROUP
Germany
Hammer stroke or drive rivets are set by driving the mandrel into the rivet body (e.g. by means of a hammer). This causes the lower end of the rivet body to expand and allows riveting components with openend boreholes and also riveting of blind-end boreholes.This riveting technology is suitable for the most diverse material combinations. For blind-end boreholes, a trial is necessary in order to establish the optimum rivet length based on the component characteristics and the firmness requirements.
Request for a quoteHONSEL-GROUP
Germany
The classic form of blind rivet nuts with parallel shank for use in dry and grease-free components . The availability in aluminum, steel and stainless steel with all head shapes (flat head, countersunk head and small countersunk head) in sizes from M3 -M12 provides a large choice for all applications .
Request for a quoteRUF MASCHINENBAU GMBH & CO. KG
Germany
Through the process of briquetting, the value of residual metals can be increased considerably. The value of residual metals can be increased considerably. A further advantage is the recovery of expensive cutting fluids that can be pressed out of wet chips and then reused. When melting briquettes, combustion is significantly lower and results in a higher melting yield than with loose chips. Depending on the need, our briquette systems are equipped with hydraulic motors between 4 and 90 kW. They will achieve a specific pressure of up to 5,000 kg/cm². Suitable for aluminium, steel, cast iron, copper and many other metals Advantages: - Heavy reduction of volume, reducing storage and transportation costs - Recycling of expensive cooling lubricants - Recipients often pay a better price for loose millings - Minimal burn-off and increased glaze recovery thereby For throughput rates between 30 and 4,800 kg/hr.
Request for a quoteRUF MASCHINENBAU GMBH & CO. KG
Germany
Based on a individual needs assessment we tailor-make briquetting solutions including peripheral devices. RUF- Charging hopper with screw conveyor for charging & transporting of bulk material as aluminium, steel, stainless steel, other metals, wood, other bulk materials.
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
The automatic plate saw VPS60-160A is BEHRINGER's solution when it comes to fully automatic cross-cutting of large plates and blocks. The vertical arrangement of the saw band has clear advantages over the horizontal design, as the engagement length of the saw band is significantly shorter. As a result, the cross cutting plate saw offers significantly higher cutting capacities while at the same time reducing tool costs. Thanks to their robust basic design and high-performance components, the automatic plate saws of the VPS series are designed for demanding applications in the steel trade, industry and metal production. From non-ferrous metals and aluminum to simple work steels and difficult-to-cut materials such as Inconel or titanium. Their modular design allows the cross cutting plate saw to be individually adapted to the customer's application.
Request for a quoteECKOLD TECHNICS GMBH & CO. KG
Germany
Domes produced with ECKOLD machines in automotive industry make sure that there is only a minimum offset between the securing screws and the surrounding metal. ECKOLD machines can produce two or even three domes in a single process. Our dome embossing machines are suitable for both single and double sheet steel or aluminium parts and come with a hydro-pneumatic or servo motor drive system. With our machines, domes can be embossed without preliminary holes (even when combined with final hole punching for a defined diameter). This offer includes: Dome embossing frame Embossings: 1 piece/stroke Embossing geometry: according to data set Drive: pneumohydraulic Mechanical interface: support stand Embossing inserts are not included in the scope of delivery. They must be chosen separately, based on the actual task. We optionally offer hydraulic or servo motor drives as well as multiple embossings/stroke.
Request for a quoteKLIO-ETERNA SCHREIBGERÄTE GMBH & CO KG
Germany
Retractable metal pen with aluminium barrel and steel clip.
Request for a quoteGESCO-METALL GMBH SCHOTTENHAMML-BIEGETECHNIK
Germany
The two basic designs in stainless steel and aluminium are available in standard sizes of 200 mm, 250 mm, 300 mm, 350 mm, 400 mm, 500 mm (cut-out in the door panel / nominal diameter). Portholes are available in five standard design versions – invisibly screwed (A), visibly screwed on one side (B), visibly screwed on both sides (C), with flat-leaf screw fitting (D) and with folded screw fitting (E). Our portholes can be fitted in Internal doors House doors Panels Facades Surfaces Aluminium Press plank, ready for powder coating Finely brushed, anodised RAL powder-coated Stainless steel Finely brushed
Request for a quoteIPR GMBH
Germany
for hexagonal crimp of Aluminium Steel Cables with Steel tube: 50/8 DIN 48083
Request for a quoteIPR GMBH
Germany
for hexagonal crimp of Aluminium Steel Cables with Aluminium tube: 120/20; 150/25 DIN 48083
Request for a quoteIPR GMBH
Germany
for hexagonal crimp of Aluminium-Steel Cables with Steel tube: 120/20; 150/25 DIN 48083
Request for a quoteIPR GMBH
Germany
for hexagonal crimp of 10mm² Cu and Aluminium-Steel Cables with Steel tube: 16/2,5; 25/4; 35/6 DIN 48083
Request for a quoteResults for
Aluminium steel - Import exportNumber of results
61 ProductsCountries
Company type
Category