Aluminium roofing - Import export

Exceptional color and gloss retention, with the added benefit of the copper appearance, give architects and builders a new and popular option for roofing, facades, interior cladding and roof drainage systems. Similar to our other coil-anodized aluminum products, Novelis CU77A can be processed further, including roll forming, edging, bending and stamping.

To protect your goods from condensation or condensation water, it is possible to integrate a special underlay tarpaulin. It consists of mesh fabric, which allows moisture to diffuse from the inside of the hall to the outside. The fields of application of our condensation water protected halls: - Storage for temperature-insensitive goods - protected loading of transporters - protected parking and storage area - Picking for goods of all kinds - Maintenance and repair When single-layer tarpaulins in the roof are no longer sufficient, we at HR-Structures recommend our modern thermal tarpaulins. Produced in membrane technology, the two-layer roof and gable covering has a heat-insulating effect and prevents condensation on the underside of the roof tarpaulin. It consists of two shells, which are filled with air and thus provide additional insulation and protection against condensation. As wall cladding we recommend here the trapezoidal sheet.

HR-Structures canopies without wall cladding: The ideal solution to quickly create covered loading zones and storage areas. Our storage tents protect from direct sun, rain, hail or snow from above. The areas of application of our canopies: - Storage for weather-insensitive goods - Protected loading of transporters - Protected parking and storage area - Picking for all kinds of goods - Roofing of sports facilities The covering of your roofing can be freely chosen between a PVC tarpaulin or a trapezoidal sheet. Our highly tear-resistant PVC tarpaulin can be installed quickly and cost-effectively due to its low weight, while our trapezoidal sheets offer even better weather protection and the possibility of installing photovoltaic modules. Depending on your wishes and local conditions, your roofing can be anchored using ground nails or dowels to ensure maximum stability.

At Novelis Italia innovation is not only a word, but a great reality in continuous evolution. The Novelis laboratories have devolopped a special paint that makes SUPER GRONDAL® still more re­sistant to weather and polluting agents. Thanks to this new shade, the aluminium becomes furthermore similar to the copper, with a consider­able advantage: the effect remains unchanged through the years! SUPER GRONDAL® is used to manufacture gut­ters, pluvials and accessories. Thanks to its excep­tional resistance it would be a great choice also for fa9ades (ventilated and non-ventilated) and roofing. Differently from other materials, pre-painted alu­minium is totally recyclable and maintains its me­chanical and metallurgical properties over time. SUPER GRONDAL® has an excellent resistance to the weather agents and does not release any kind of polluting material.

The primary task for the roof of any building is naturally to protect the interior. And gutters also protect the structure, playing a key role in controlling water flow off of the roof and away from the building. Of course, the roof and the gutter system also contribute to a building’s aesthetic appeal and its visual impression. In fact, often the roof of a building becomes a fixture on the skyline and a landmark, especially when the design is unique and the surface colorful. Novelis pre-painted aluminum has proven to be an effective, durable and attractive option for aluminum roofing panels and aluminum gutter material. All of the elements are easily installed and nearly permanent when maintained properly. Our products also offer practically endless possibilities for designers when considering the roof and gutters as part of their aluminum architecture.

The AL 13 X aluminum roof hook from Alumero has the same static properties as a 35 x 6 mm stainless steel bracket. However, the 4-fold adjustability makes it much more flexible and practical. It is designed for horizontal mounting of the solar modules.

The AL 13 X aluminum roof hook from Alumero has the same static properties as a 35 x 6 mm stainless steel bracket. However, the 4-fold adjustability makes it much more flexible and practical. It is designed for horizontal mounting of the solar modules.

The AL 13 aluminum roof hook from Alumero has the same static properties as a 35 x 6 mm stainless steel bracket. However, the 3-fold adjustability makes it much more flexible and practical

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

J57S UP is a rolled alloy designed to be a perfect base material for batch anodized aluminum. Created specifically by Novelis to meet the requirements of modern architecture, including aluminum facades and aluminum roofing, its value and utility have been proven over decades of use. Its excellent deformation capacity provides the best preconditions for fabrication, allowing for bending, cutting, punching, drilling and more.

More ductile than most lock-welt materials, shaping of this aluminum standing-seam roofing can be done easily to match any architectural application. A wide range of colors and finishes are also available, so designers can be as creative as they wish, knowing what’s on paper can become reality.

DBA roof flush with aluminium facing

DÜA-S roof with all-round above-roof ventilation and aluminium shield

DÜA roof with all-round above-roof ventilation and aluminium shield

Depending on the subsurface (steel, copper, aluminium or titanium zinc), this stainless steel anchorage point can be installed on a metal roof using either aluminium or brass clamps. It is simply attached to a standing or copper standing seam using the specially-designed clamps supplied - completely penetration-free. EN 795:2012, A + CEN/TS 16415:2013 Freely-rotating anchor eyelet Clamped onto a seam without penetrating your roof surface Mounted on a single seam For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; titanium zinc and aluminium ≥ 0.7 mm For Rheinzink and similar systems Incl. installation set

For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..

For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..

For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..

For roof-construction in industry and commerce, Panelsell Ltd are able to provide sheets in various thicknesses and lengths. Increasingly instead of profiled sheets (uninsulated trapezoidal sheets), insulated roof panels are used. These panels consist of an upper and lower sheet, which are usually made of galvanised painted steel. Standard thicknesses tend to between 0.4mm to 1.0mm, which can produce different strengths as needed. It is also possible to have the outer and inner sheets made from aluminium or stainless steel.In areas exposed to a heavy stress due e.g. to ammonia, ECO panels are also used, as an alternative to insulated roof panels with a galvanised inner surface made of steel sheet. The inner surface of these panels is made of stucco embossed aluminium foil. In addition, these roof panels are cheaper than conventional roof panels. Insulation tends to come in both polyurethane and polyisocyanurate (PUR and PIR) as well as rockwool (also known as mineral wool). Decision for the choice of insulation takes into account for flammability and resistance, or structural characteristics such as themal and moisture protection. The roof panels often have a trapezoidal box profile structure. There is an alternative option of corrugated profile (shaped in a sine-wave) and traditional tile aesthetic.. On request, we can offer you the full range of insulated roof panels. This is in accordance to your requred length, thickness and most RAL-colours. Of course, we can also offer special offers and cancelled ordesr that has been returned to site..