Results for
ROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
Speedy Rail is the special self-supporting and self-aligning rail in extruded aluminum with a deep hard anodized surface treatment that offers exceptionally high performance and load capacity, with no maintenance and lubrication required, total reliability even in dirty environments with uniquely quiet operation. It is available with v-shaped rollers or cylindrical rollers, both covered in a plastic compound, and can be used as a linear rail or actuator. High reliability up to 80,000 Km Self-supporting for greatest design freedom Self-aligning system Uniquely quiet High technical performance High load capacity of over 3,000 Kg Optimal reliability in dirty environments Absence of lubrication Potentially infinite strokes with jointed versions Ideal for making 2 or 3-axis Cartesian systems for several applications Use as a linear guide or actuator thanks to belt or rack and pinion drives Main fields of application: Self-supporting linear rails for welding machines Self-supporting...
Request for a quoteROLLON GMBH
Germany
The PLUS SYSTEM series of linear actuators consists of highly protected linear units featuring a self-sustaining anodized aluminum structure and a steel re-enforced driving belt. This is a line of exceptionally sturdy and high performance actuators in terms of load, moment control, speed and acceleration. High load capacity,High speed,Low wear and tear,Low friction,Low maintenance.Corrosion resistant version All Plus System series of linear actuators are available with stainless steel elements, for applications in harsh environments and/or subject to frequent washes. The Plus System linear units are made by using extruded anodized Anricorodal 6060 and 6082 aluminum, which houses bearings, linear rails, nuts and bolts and components made of low carbon SS AISI 303 and 404C steel, preventing or delaying corrosion caused by humidity experienced in the environments where the linear units are used.The PLUS SYSTEM series consists of 3 distinct products with different features: ELM,Robot,SC.
Request for a quoteIGUS® GMBH
Germany
DryLin® telescopic rails Total extensions Partial extensions Over-extensions DryLin® telescopic rails DryLin® telescopic rails with locking function Detent in start, medium and end position Freely selectable locking position DryLin® telescope - wth locking mechanism Completely lubricant-free linear extensions in continuous stroke lengths of 100mm to 600mm - maximum pulled-out length: 1200mm. The telescopic systems consist of anodized aluminum guide rails and a gliding block made of the proven iglidur material. By the incompounded solid lubricants, iglidur tribopolymers enable dry operation in every application. The advantage - besides being maintenance-free - is the carefree use in clean hygienic environments. No oil or fat can be transmitted to other products, clothing or people. Applications even in cleanroom air showers were already implemented. But the dry operation also has advantages in the dirt accumulation area. Dirt particles do not stick to the guide and do not become a sticky mass. As an option, all telescopic guides can be delivered with a detent in start-medium-end position. Requirements for individually positioned locking positions can be met. Detailed view: DryLin® telescopic rail in a guard door adjustment. DryLin® telescopic rails Total extensions Partial extensions Over-extensions DryLin® telescopic rails DryLin® telescopic rails with locking function Detent in start, medium and end position Freely selectable locking position DryLin® telescope - wth locking mechanism
Request for a quoteIGUS® GMBH
Germany
DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor
Request for a quoteIGUS® GMBH
Germany
DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel DryLin® T - Technical data DryLin® T - Clearance adjustment DryLin® TWBM hand clamp DryLin® T - Design rules DryLin® T - Automatic clearance adjustment DryLin® linear guide systems in the cleanroom DryLin® T - Applications DryLin® T - System design DryLin® T - Installation videos System selection & service life calculation DryLin® T - Adjustable clearance The DryLin® T standard version is supplied preset and can be put into operation at once. The user can also manually adjust or fine-tune the clearance of the linear guide. The individual adjustment for your application, as well as the potential to respond to uneven screw surfaces through specific clearance allowance. DryLin® T - Adjustable clearance DryLin® T - Automatic DryLin® T carriages of the automatic version have a mechanism that automatically adjusts the bearing clearance after removal of the preload key. In case a bearing clearance of more than 0.13 mm has to be adjusted during operation, the bearing clearance automatically resets itself when the carriage is completely unloaded. DryLin® T - Automatic DryLin® TW-HKA manual clamp The manual clamp has been developed for simple tasks. The creep behavior of the clamped plastic causes a slackening in clamping force over time (up to 70%). Therefore safety-related parts should not be clamped. Please approach our applications consultant if you require other options for the clamping. DryLin® T - Manual clamping Drylin® T - Heavy Duty This series is used for the most extreme conditions such as dirt, adhesive residues, chips, mud, etc. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore non-detachable. This system is compatible with many standard commercial recirculating ball bearing systems and is available in the following sizes: TW-01-20, TW-01-25 and TW-01-30. DryLin® T Heavy Duty DryLin® T - Low-profile guide The clearance is not adjustable for the DryLin® T low profile guide rails. The gliding elements are mounted with positive fit in the chromated zinc carriage. This simple and effective design enables guides that are rugged and low-priced at the same time. DryLin® T - Low-profile guide DryLin® T - Compact linear guide This compact linear guide is suitable for rugged use (without clearance adjustment). This system has a slim design and the same dimensions as conventional recirculating ball bearing systems. The plastic gliding elements made of iglidur® J are fixed in the lid and are therefore undetachable. Suitable for DryLin® T guide rail of installation size 20. DryLin® T - Compact linear guide DryLin® TWBM - Manual clamping with high holding force This manual clamping is designed for a long-lasting high holding force of up to 500 N per clamping element. DryLin® TWBM hand clamp DryLin® T clamping elements for rail guide DryLin® T clamping elements for fast positioning by hand or with pneumatics. DryLin® T clamping element DryLin® T linear guide systems were specially developed for applications in automation and handling systems. The design objective was a rugged linear guide for application in the most diverse - and also extreme - environments. They have the same dimensions as most recirculating ball bearing guides. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Profile rail and base body of the carriage made of aluminum. The rail is hard-anodized, the aluminum base body of the carriage is clear anodized. 2 Six gliding elements made of iglidur® J serve as guide bearings, which are positioned opposite to each other in pairs and make up 3 guide bearings. 3 Alternatively, bearing clearance is continuously adjustable 4 All steel parts are stainless steel 5 The lid is made of solid plastic or stainless steel Advantages: 100 % lubricant-free Adjustable bearing clearance Automatic clearance adjustment High static load capacity Service life up to 50,000 km without lubrication High dirt resistance Low vibration and low noise When not to use ? When you want to save installation space drylin® N drylin® W When you need a pure stainless steel solution drylin® W drylin® R When you want to construct as economical as possible drylin® N drylin® W
Request for a quoteRUDOLF UHLEN GMBH
Germany
• The wire cloth shield has the dimensions 200x135mm and 2 windows with Ø 50mm • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteRUDOLF UHLEN GMBH
Germany
• The wire cloth shield has the dimensions 300x180mm and a window opening • Lenses with the dimensions 60x120mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteRUDOLF UHLEN GMBH
Germany
• The wire cloth shield has the dimensions 200x135mm and a window opening • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteAAAGILER GMBH
Germany
Practical examples of repairs with WEICON products, e.g. Renewal of a machine tool bed Repair of the fan housing of a ventilator Fixing of a logo on a sign Repair of a drive shaft Coating of a pump housing Manufacture of axle collars Installation of an abrasion protection made of ceramics in pipe connections Repair of conveyor belts in a quartz sand works Bonding of wheel tyre and gear wheel in a gravel plant Repair of agitators Repair of the end cover of a seawater filter on a yacht Relining of a machine/robot stand base Bonding of polyethylene strips to aluminium rails Internal thread bonding of a jackhammer Bonding of stoneware sewage shafts with plastic channels Repair of a pump bucket wheel Repair of the foundations of a conveyor system in a copper mine Bonding of the radiator of an electric racing car Repair of a polyethylene tank in agriculture Repair and reconstruction of pumps Repair of ships / keels
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Smooth or perforated, Novelis pre-painted products can be used for aluminum ceiling panels, grid ceilings, long panel cassettes, lamp grid elements, substructure partitions, aluminum decorative panels and support rails. The aluminum also can be combined with other materials to achieve excellent acoustic absorbance. With the modular production of aluminum ceiling tiles, if there’s ever any damage, only that area requires replacement, making maintenance simple and more cost-effective.
Request for a quoteROTSTAHL GMBH
Germany
- Aluminium clothes rail made of oval profile three non-twisting, non-tilting metal hooks - Label frames for name plates, recessed in the body - Prepared for wall assembly easy to anchor and align - Ventilation slots in the body for good air circulation in the helmet compartment Valuables compartment: JUNIOR makes it possible to store turnout gear for quick access at children eye level. In the upper spacious compartment there is plenty of room for helmets and additional equipment as well. Alternatively, a lockable door turns this into a valuables compartment. Optionally, a helmet holder can be attached to the cabinet. Stability: The JUNIOR is made with the well-known rotstahl® quality with increased material thickness and rugged metal hooks. The sturdy aluminium clothes rail is equipped with non-twisting and non-tilting clothes hooks. Variants: - number of compartments: 1; 2; 3 - great variaty of colours - different locks
Request for a quoteROTSTAHL GMBH
Germany
- Aluminium clothes rail made of oval profile 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side, position can be changed as needed - Extra-large compartments provide sufficient storage space for equipment - Perforated base plate guarantees that moisture to drip away Valuables compartment: The compartment with inserting slot allows valuables to be stored quickly even with the door locked. The rubber-coated base softens impact and prevents scratches. Helmet compartment: Helmets are properly stored in the spacious helmet compartment. The gear locker can be equipped with either the ergonomic or flexible helmet holder. Alternatively, the helmet holder can be mounted on top of the cabinet creating extra storage space for equipment or large protective helmets. Variants: - number of compartments: 1 or 2 - Light grey, Flame red and Gentian blue are included, further on demand. - different locks
Request for a quoteROTSTAHL GMBH
Germany
- Aluminium clothes rail made of oval profile with 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side, position can be changed as needed - Private compartment door with slot for personal documents and letters - Prepared for wall assembly easy to anchor and align Helmet compartment: The cut-out in the helmet compartment shelf guarantees that the helmet can be stored without buckling the neck protector. In addition, the recessed shelf makes it easier to store large helmets. Ventilation holes enable to quick drying. Private compartment: Available in width: 20 cm; 30 cm; 35 cm; 40 cm. Turnout gear and private clothing are stored separately. While the open compartment makes the quick access storage of turnout gear possible, the lockable compartment provides safe storage for private belongings. Colour of body and doors: Light grey, Flame red and Gentian blue are included, further on demand.. Locks The compartment can be equipped with different locks.
Request for a quoteROTSTAHL GMBH
Germany
- Aluminium clothes rail made of oval profile 3 non-twisting, non-tilting metal hooks - Material hooks fixed at the side position can be changed as needed - Prepared for wall assembly, easy to anchor and align - Perforated base plate guarantees that moisture to drip away Valuables compartment: The open storage shelf can be replaced by a lockable valuables compartment if needed. The compartment door has a slot for letters and documents. Integrated rubber pads ensure quiet closure of the door. Helmet holder: The gear locker is equipped with the ergonomic helmet holder as standard. An alternative accessory is our flexible helmet holder. Thanks to the round shape, the helmet is stored with care, as though on your head. Good ventilation is guaranteed. Variants: - number of compartments: 1; 2; 3 - compartment width: 30 cm; 40 cm; 50 cm - Light grey, Flame red and Gentian blue are included, further on demand. - different locks
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
Novelis specialty aluminum offers a range of possibilities for interior and decorative designs. The light weight and flexibility make it ideal for use in aluminum ceiling panels. Smooth or perforated, Novelis pre-painted products can be used for aluminum ceiling panels, grid ceilings, long panel cassettes, lamp grid elements, substructure partitions, aluminum decorative panels and support rails. The aluminum also can be combined with other materials to achieve excellent acoustic absorbance. With the modular production of aluminum ceiling tiles, if there’s ever any damage, only that area requires replacement, making maintenance simple and more cost-effective. With the versatility of aluminum, interior spaces can be as visually impressive as the exterior. Novelis pre-painted and anodized aluminum can make rooms better from the top down, providing options to enhance ceilings in a room, as well as the furniture to fill it.
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 0326 directly controlled 3/2-way pilot solenoid valve is designed for mounting to a compact aluminium rail as a valve battery for mounting in control cabinets or as a valve manifold near the pneumatic components to be controlled. The body is made of plastic. The coil is plastic encapsulated. -Robust design -Coil easy to replace -Option: integrated LED (M12 version) -Modular battery mounting
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
AERO-LIFT VAKUUMTECHNIK GMBH
Germany
Rotary arm with ceiling fixture Fixture of the rotary arm at the ceiling. Rotary arm with wall fixture Fixture of the rotary arm at the wall or existing column. Column mounted slewing crane Column mounted slewing crane for the AERO-LIFT tube lifter. The slewing area is 270° an the arms are in different dimensions available. Folding arm Ceiling rail system Aluminium easy sliding rail system. Mobile base plate This flexible solution with the mobile bottom plate allows to use the tube lifter for some workplaces. The mobile column mounted slewing crane can be moved with a forklift or with wheels. A fixtation at the floor is not necessary. Special solutions Customized special solution for tube lifters
Request for a quoteABS SAFETY GMBH
Germany
This guard rail - made of aluminium and stainless steel - is kind to your roof as it is simply weighed down using special weights without penetrating your roof surface. This collective protection mechanism, which is 1100 mm high, can be used to secure a domed rooflight up to 2.5 m x 2.5 m on a flat roof with a maximum pitch of 10°. EN 13374:2013, A Penetration-free installation Designed for flat roofs with a pitch of up to 10° Suitable for domed rooflights: 2.5 m x 2.5 m Handrail height: 1100 mm Weighed down using special UV-resistant plastic weights Weights: 760 x 800 mm (2 x 25 kg) Incl. special fleece material to protect the surface
Request for a quoteABS SAFETY GMBH
Germany
Secure your domed rooflights using this 1100 mm-high guard rail made of aluminium and stainless steel. It protects your workers from falling off the roof or putting a foot through the rooflight. This guard rail system is suitable for flat roofs with a pitch of up to max. 10°. It can be installed on bitumen or fabric-reinforced plastic sheeting to provide a completely penetration-free solution. EN 13374:2013, A Designed for flat roof pitches ≤ 10° Suitable for domed rooflights: Max. 2.5 m x 2.5 m Handrail height: 1100 mm Weight per post: Approx. 3 kg (traditional posts 30 kg) Set includes bitumen patches PVC patches need to provided and cut to size onsite
Request for a quoteSMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, here choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T1-WV length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53-chrome plated (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 75 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53-chrome plated Chrome layer thickness: ca. 10 my Chrome layer hardness: >= 800HV Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h7 (0-18my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSN 12-T2-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSN we deliver assembled to you. Product data unit: Dimensions: Type d A h +/- 0,15 V N1 N2 d1 d2 W (°) E T weight./kg* SMTSN-12 12 40 22 5 8,0 5,0 4,5 4,5 5,8 50 29 120 0,52 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: Cf53 (1.1213) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Dimensions: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew kg SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: Cf53 Hardened: 59-65 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
SMALLTEC GMBH & CO. KG, DOMAIN LINEAREASY.COM
Germany
Product description Shaft support rail unit SMTSU 12-W length precisely lengths to the millimetre, choosable up to 6000mm, with rail in aluminium and shaft in hardened, quality: stainless steel X46Cr13 (1.4034) This system you can combined with all open (look the "o" in the name of article) housing units, see categorie: http://lineareasy.com.de/shop/index.php/cat/c12_Gehaeuseeinheiten.html Urgent notes for order: The excat required length of the unit please enter in the bottom field. If you give us no note there, we supply automatically the maximum length of this article. The type SMTSU will be not mounted !. Product data unit: Abmessungen: Type Ød h +/-0,15 H1 A A1 W M Ød1 e T Gew./kg* SMTSU-12 12 14,5 3 11 6,0 5,4 M4 4,5 15,5 75 0,44 *weight in the table it relates to a rail with length 600mm without shaft. depending on the length of the shaft support rail unit, the rail is composed of several individual section T5 min = 20mm the weight of the unit you´ll see down on this side material of shaft support: Aluminium Product data shaft: Material shaft: stainless steel X46Cr13 Hardened: 52-56 HRC Rht min.0,6 Grounded Tol. h6 (0-11my) Surface roughness: Ra <= 0,3 Weight (shaft only): 0,89kg/m Straightness:0,2mm/m Predrilled: see the table Chamfer: on both sides of the shaft appr. 1 - 2mm x 30° (depending the diameter of the shaft)
Results for
Aluminium railing - Import exportNumber of results
29 ProductsCountries