Aluminium cutting - Import export

Mechanical Crimping Pliers Mechanical Lever Crimping Tools Hydraulic Hand Operated Crimping Tools Hydraulic Battery Driven Crimping Tools Hydraulic Crimping Heads Cordless Multifunction Tool for Crimping and Cutting Copper and Aluminium Cables

Fully automatic operation cutting of aluminium and non-ferrous metal NC Control with touch screen display 5,7” Piece counter showing target/actual number of pieces Piece multiplier when cutting bundles Indication of cycle time Multiple feed device – max feed 3.250mm Table separation before the saw blade retracts so the profile is not touched by the saw blade Electronic material feeder, ball screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm

The Gmöhling serving trolley is modular in structure and thoughtfully designed to the very last detail. We offer trolleys with 2, 3 or 4 shelves. The height and number of shelves can also be changed. The shelves are also available in 2 versions: in aluminium or stainless steel. To cut transport costs, we offer our serving trolley in an unassembled basic version for easy self-assembly. The serving trolley, also referred to as a shelf trolley, is used for serving, transport and temporary storage. A practical aid for use in kitchens, laundries, hospitals, old people's homes, companies and various institutions. Polished stainless steel trays, with reinforced edges Load capacity: max. 60 kg per tray 2 anodised aluminium square pipe pushbars 5 mounting positions allow variable spacing between trays Trays are screwed to pushbars 4 rubber deflector castors, dia. 100 mm, grey 4 swivel castors, wheel die. 125 mm, non-marking thermoplastic rubber wheels, galvanised steel forks with plain...

The Gmöhling serving trolley is modular in structure and thoughtfully designed to the very last detail. We offer trolleys with 2, 3 or 4 shelves. The height and number of shelves can also be changed. The shelves are also available in 2 versions: in aluminium or stainless steel. To cut transport costs, we offer our serving trolley in an unassembled basic version for easy self-assembly. The serving trolley, also referred to as a shelf trolley, is used for serving, transport and temporary storage. A practical aid for use in kitchens, laundries, hospitals, old people's homes, companies and various institutions. Anodised aluminium trays with reinforced edges. Load capacity: max. 60 kg per tray 2 square anodised aluminium pipe pushbars 5 mounting positions allow variable spacing between trays Trays are screwed to pushbars 4 rubber deflector castors, dia. 100 mm, grey 4 swivel castors, wheel die. 125 mm, non-marking thermoplastic rubber wheels, galvanised steel forks with plain...

The cable channels feature a cover that can either be removed by lifting it upwards or pivoted open by up to 90° along the length of the channel. Order made easy. In addition to the pivoting cover, installers also value the optional plastic separating strips, which ensure that the individual hoses, signal lines and power cables in the cable channel can be easily separated and well structured. The separating strips also facilitate overhead assembly. When inserted in the cable channel, they prevent the installed cables and channels from falling out. The separating strips can be opened at any time to allow the installation of further cables. They are also available with mounting holes, which is a new feature for aluminium cable channels. These can be very quickly attached to a BLOCAN profile slot by means of a pivoting mounting clip. Here too, the RK Rose+Krieger product philosophy takes hold – connection without drilling! Simply cut the aluminium profiles to length and assemble them.

The Gmöhling serving trolley is modular in structure and thoughtfully designed to the very last detail. We offer trolleys with 2, 3 or 4 shelves. The height and number of shelves can also be changed. The shelves are also available in 2 versions: in aluminium or stainless steel. To cut transport costs, we offer our serving trolley in an unassembled basic version for easy self-assembly. The serving trolley, also referred to as a shelf trolley, is used for serving, transport and temporary storage. A practical aid for use in kitchens, laundries, hospitals, old people's homes, companies and various institutions. Basic version consists of 2 pushbars with wheels, 2 trays alternativeley in anodised aluminium or stainless steel, mounting material Delivered in pieces - reduces freight charges Easy to understand assembly instructions

0 – 300 mm adjustable pneumatic material feed and digital display Vertical hydraulic punching unit to the right of the saw blade Power 200 KN Punching tools according to profile shape Aluminium profile – finished Cut to length Vertical punching Up to 8 profiles in one operation cycle Cycle time from 13 s / 1,63 s each piece Layout of punching tools for multiple profiles Quick change punching tools according to the profile shape Pneumatic material feed 8 profiles at once Special shaped quick change support Clamps according to profile shape – changeable Hydraulic punching unit Power 200 KN, stroke 20 mm Cycle spray mist device for each die and for the saw blade

BLOCAN® aluminium profile systems – the assembly system without machining The industrial aluminium profile system is the result of years of application experience and is characterised by extraordinary flexibility and proven reliability. The range includes construction profiles, functional profiles and heavy-duty profiles. The options for combination and use of the flexible BLOCAN® modular profile. No need for drill holes ... these are held together without! Simply cut the aluminium profiles to length and assemble them! That’s what this unique range of construction profiles was designed for. Clever connection elements free you from machines and equipment. The profiles are cut to length and assembled. And more than 100 different profile sizes and cross-sections can be easily assembled using this connection method.

Container of aluminium with smooth surface Cut side wall approx. 1130 x 250 mm facilitates loading and unloading Reinforcement rims at top and bottom provide load stability Antistatic and do not attract dust or dirt With full- rubber tyres, non-marking and thread protection 2 swivelling castors with brakes in accordance with European standard DIN EN 1757-3 Transport trolley D 3808 - Models

Cut-To-Length Lines are core competence at GSW. They belong to the family of Cutting Lines and are designed to process diverse materials out of steel, non-ferrous metals or aluminum and precisely cut a coil into sections of equal length (which is where the name comes from). Starting with narrow slit strip and finishing somewhere beyond 2000mm width – our Cut-To-Length Lines always know how to shine in this process.

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For cutting copper and aluminium cable with strong rubber or plastic sheathing • Special cutting geometry and precision cutting for a clean cut without any burrs • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Opening of the blade in each position possible • Optimum leverage, easy handling and minimum effort by ratchet action • Made of special steel, high-strength parts that are especially subject to wear and tear are additionally hardened and tempered

Horizontal End-Suction Pumps are centrifugal inline pumps with a compact design where the impeller is mounted onto the extended motor shaft. These pumps are not self-priming and must be gravity fed. All pumps are equipped with double mechanical seal. This pump series is designed for horizontal installations next to a tank and are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60 HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SBC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. Volumetric delivery: up to 1400 l/min Delivery head: up to 34 m

Cutter Pumps The cutter pumps of the series SFC are capable of cutting aluminium chips and similar materials and pumping of these materials along with the coolant fluid. An agitator located at the pump suction helps to break up and separate any large bundles of chips or birds nests which reach the pump suction. The specially made cutting unit (>60HRC) is cuting chips and the above located semi-open impeller allows with its large clearances to pump the particles along with the coolant fluid from the machine back to the filter. The SFC pumps are capable of handling chip to coolant ratios of up to 1.5% by weight. The SFC pumps are equipped with the user-friendly 45 degree flange connection which allows for either vertical or horizontal pipe connection and the connection of a pressure gauge with G 1/4. Volumetric delivery: up to 1700 l/min Delivery head: up to 45 m Please contact us for delivery quantity.

In the aviation industry, there is an increasing trend towards larger and larger monolithic structural components. The ECOSPEED series, featuring a horizontal spindle and a vertical pallet arrangement, has been specially developed for highspeed machining of these large structural aluminum components. A pallet transport system feeds pallets to the machine, the storage station and the loading/unloading station. The innovative Sprint Z3 parallel kinematic machining head, provides the user with the optimum 5axis simultaneous machining process. At a maximum cutting volume of up to 8,000 cm3/min, the machine concept is the world's most productive solution for cutting aluminium structural components, drastically cutting both production times and costs.

Compact and wear resistant tool made of aluminium. Advantages Packing cut without necessary length calculation (an adder-factor x - is already included) Time saving Repeatable results No waste Suitable as well for Trapez-Pack Technical data For shaft diameter up to 80 mm with W5PS-SK and 110 mm with W5PS-BU With extension W5PS-V-SK to 200 mm and W5PS-V-BU to 250 mm shaft diameter Scale: in inches and mm Packing sizes: from 3 to 25 mm Spare parts available Variants 45° skive cut type W5PS-SK 75° Butt cut type W5PS-BU Accessories Extension W5PS-V-SK Extension W5PS-V-BU Spare knife

Ecospeed is the synonym for the most economic method of machining complex aluminium structural components in the aerospace industry. Based around its’ unique parallel kinematics Sprint Z3 machining head, Ecospeed represents by far the most productive solution for the high performance cutting of monolithic aluminium aerostructures. The Ecospeed family has been continuously developed to meet market demands. New challenges imposed by the market are implemented within a team framework, by maintaining intensive contact with end users. Yet another recent customerdriven requirement placed on the Starrag Technology GmbH management board was to supply an optimized economic Ecospeed variant for machining long and narrow structural components at high cutting rates and using complex 5axis geometries with 5side access to the work piece.

Engineered for : • Pure aluminium and aluminium alloys • Solid material and structurals • Materials with residual stress and a tendency to become pinched

Self-forming screw, Torx & Self-tapping screw, hexagon socket Connection of two aluminium profiles; no thread cutting is necessary to fix the screw; because of the special form of the head of the screw and the self-forming thread, a conductive connection of two proviles is achieved Material: Zinc plated steel Self-forming countersunk screw, with hexagon socket For all mounting applications of the front of the aluminium profile; detachable and reusable; designed for optimized fastening strength Material/surface: Steel burnished or galvanised Note: can be screwed on Cover cap available in the product portfolio Self-forming button-head Screw To fix connection angles, angles, turn-locks and other components to the core hole of the aluminum profile Material: zinc plated steel Alternative: Connecting screw M12x30 (optionally Torx) for connecting two aluminium profiles Material: zinc plated steel

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS detaches from a workpiece with 100% residue-free evaporation even when the parts lie flat on top of each other. Only selected raw materials of the highest purity are used for SURVOS. One of the main components is dearomatized hydrocarbons of the highest quality. As a metal processing medium that evaporates residue-free, SURVOS combines optimum lubricity with favourable values for evaporation speed, toxicology and environmental protection. All SURVOS products are classified according to REACH (EC 1907/ 2006) and do not contain any substance that is on the list of candidates for SOVHC.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS Plus L meets the strict food law requirements of the FDA US regulations in acc. with 21 CFR 178.3620(b) and 178.3120. SURVOS Plus has a high lubricity and quickly evaporates 100%.* * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free. The evaporation residue of SURVOS Plus L is 0.0045% or 45 ppm.

SURVOS products are optimally suited to sheet metal forming, machining and assembly technology. Our SURVOS has also been successfully used in cutting and punching aluminium sheets, steel sheets, copper and brass sheets, in cold profiling, bending, embossing, sawing and drilling aluminium profiles for decades. SURVOS – 100% residue-free* evaporating metal processing oil. SURVOS Rapid D evaporates considerably faster than the "Standard" formulation (with a somewhat lower lubricity). SURVOS Rapid D impresses, however, with short evaporation times and is 100% residue-free*. The fluid is used in particular when operations follow each other in a short cycle sequence and no residue is allowed to remain. * According to the specifications of the DAB (German Pharmacopoeia), an evaporation residue of < 0.01% is considered to be residue-free.