Alloy steel - Import export

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

EZM Edelstahlzieherei Mark is traditionally a manufacturer of speciality products, whose uses also include medical equipment. To do justice to the high, specific demands on this product segment and this market, we have given these products a special status within the company. EZM offers EZM Chirusteel and EZM Chirutan products under the brand family name EZM Chiruline. In addition to placing special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

Special Ratchet Head 'Mini' Interchangeable ratchet head for use with the Sturtevant Richmont Mini-Torq. Key Features: - Reversible R/L - Fine geared. - Forged alloy steel, body chrome plated.

Case Hardening Steels & Steels for Quenching and Tempering EN 10083-2 Unalloyed Steel (C 35/C40/C45/C60, C22E – C60 E+U, +N) EN 10083-3 Alloyed Steel (25CrMo4, 34CrMo4, 42CrMo4, 51CrV4, 20MnB5, 30MnB5…) EN 10084 Case Hardening Steel (16MnCr5, 20MnCr5…)

Special Open End Head 'Mini' Interchangeable open end head for use with the Sturtevant Richmont Mini-Torq preset clicker torque wrench. Further A/F's and/or special manufacturings available on request. Key Features: - According to DIN 3110. - Fixed by 2 x M3 screws. - Forged alloy steel, chrome plated.

Special Box Head 'Mini' Interchangeable box head for use with the Sturtevant Richmont Mini-Torq preset clicker torque wrench. Further A/F's and/or special manufacturings available on request. Key Features: - Double hex point force transmission. - Fixed by 2 x M3 screws. - Forged alloy steel, chrome plated.

EN 10025 1-2-5 Non Alloyed Steel Products for Structural uses S 185 JR, S 185 JO, S 185J2, S 185 K2, S 235JR, S235JO, S235J2, S 235K2, S 275JR, S 275JO, S 275J2, S 275K2, S 355JR, S 355JO, S 355J2, S 355K2, S 355JOW, S 355JOWP EN 10149 1-2-3 / SEW 092 Hot Rolled Steel Products with a High Yield Quality for Cold Forming S315MC, S 355MC, QSTE380TM, S 420MC, S 460MC, S 500MC, S 550MC, S 600MC, S 700MC, S 260NC, S 315NC, S 355NC, S 420NC EN 10111 Hot Rolled Steel Products with a Low Carbon Content for Cold Forming DD11, DD12, DD13, DD14 Non Alloyed Steel Products with Surface in Relief (tear-drop and chequered pattern sheets)

EN 10028-2 Unalloyed and Alloyed Heat Resistant Steels (P 235/265/355 GH, 16 Mo3, 13 CrMo4-5, 13CrMoSi5-5, 10CrMo9-10...) EN 10028-3 Weldable Normalized Fine Grain Steels (P275/355/460 N/NH/NL1/NL2) EN 10028-4 Ni-Alloyed Steels with Specified Low-Temperature Properties (13MnNi6-3, 12Ni14, X12Ni5, X8Ni9, X7Ni9…) EN 10028-5 Thermomechanical Rolled Fine Grain Structural Steels (P 355/460 M/ML…) EN 10028-6 Quenched / Tempered Fine Grain Structural Steels (P 355-690 Q/QH/QL)

Ronix RH-1431 Water Pump Plier is commonly used for turning and holding nuts and bolts, gripping irregularly shaped objects, holding pipes, etc. RH-1431 with its 10inch size holds all kinds of items with a larger diameter too. This high alloy steel is an ideal hand tool for all industries including automotive, electrical, HVACR and even for DIY. Using this hand tool, the chance of slipping will reduce dramatically due to its self-locking on pipes.

We supply the European and international market with unalloyed and medium-alloyed chain steel wires from our Iserlohn-Kalthof plant in sizes ranging from 4.0 mm to 25.0 mm.

KB Schmiedetechnik GmbH is a drop forge in West Germany, located between the historic “blade & metal region” Solingen-Remscheid-Wuppertal and the “Borussia soccer city” Dortmund, specialized in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications and standards: pressure equipment: valves, boiler systems, piping PED 97/23/EG, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering, certified by •American Bureau of Shipping (ABS) •Bureau Veritas (BV) •Det Norske Veritas (DNV) •Lloyds Register (LR) •Nippon KaijiKyōkai (ClassNK) Examples: components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pressure-bearing parts like valve bodies, pipe connections, and more.

Round tool steel in deffent alloys, standard sizes from stock

Flat tool steel in deffent alloys, standard sizes from stock

EWM welding consumables for MMA welding Welders can choose between different stick electrodes with different coating materials to work with: — unalloyed steels — low-alloy heat resistant steels — high alloy steels — Copper-based materials — Cladding

EWM welding consumables for MIG/MAG welding Welders can choose between different welding rods with different diameters and materials to work with: — unalloyed steels — low-alloy steels — high alloy steels — Nickel-based materials — aluminium alloys — Copper-based materials — Hardfacing

EWM welding consumables for MIG/MAG welding Welders can choose between different spool sizes with different wire diameters and materials to work with: — unalloyed steels — low-alloy steels — high ally steels — Nickel-based materials — aluminium alloys — Copper-based materials — Cladding

Engineered for : • Stainless steel • Heat resistant steels • Cold and hot working steels • Hardened steel up to 1900 N/mm2 • Nickel based alloys • Aluminium-silicon alloys • Copper-nickel alloys • Titanium and titanium alloys • Exotic, hard to cut alloys

Engineered for : • Induction hardened piston rods • Steels hardened up to 62 HRC • Hard chromium plated materials • Manganiferrous alloyed steels

Engineered for : • All-purpose use for construction steel, low-alloy steel, cast iron, aluminium, copper and bronze • Solid material in medium and large dimensions

VSG systems offer a poven and economic solution for the inductive melting of metals or alloys under vacuum or protective gas atmosphere and subsequent casting. Applications: The VSG furnaces can be universally employed for melting and casting under high vacuum or different gas atmospheres in the laboratory or production, e.g. alloying, degassing, purification melting, re-melting processing of noble metals highly pure, highly alloyed steel. • Processing of: ◦noble metals ◦ processing of highly pure, highly alloyed steel ◦ High temperature resistant materials on Fe- Ni- Co- basis ◦ Solar-silicon and other special material ◦ Special- / super alloys

Zinc Alloy and Stainless Steel versions available,Opening angle 180°,ROHS compliance

75mm Length, 90°hinge,both Zinc Alloy and Stainless Steel versions available,ROHS compliance

Zinc Alloy and Stainless Steel versions available,1333key or Non-locking version,Door Cutout: Ø22.5*20.1mm,Easy Installation,ROHS compliance