All plant - Import export

All high quality plant extracts of Anklam Extrakt GmbH are listed here: Passionflower Herb Extract Purple Coneflower Dried Pressed Juice Ivy Leaf Extract Cranberry Extract Artichoke Leaf Extract Elderberry Extract Marshmallow Root Extract Mate Leaf Extract Lemon Balm Leaf Extract Pumpkin Seed Extract Sage Leaf Extract Sea Buckthorn Berry Powder Hawthorn Leaves and Flowers Extract

What you can expect from APROVIS steam generators: - Efficient steam generation in combined heat and power plants - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Performance areas: 1 to 25 baro, 100 to 25,000 kg/h - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives - Single, double or triple version for operation with one, two or three engines with completely separate exhaust gas sections - The APROVIS Controlling System (ACS) is individually adapted to each project and is delivered in the required language - Access to the ACS using a modem enables easy fine-tuning of the system or remote maintenance for swift support if and when discrepancies occur during operation

The control or PLC programming of your plant or system can be set up centrally or peripherally and thus adapted to your requirements. This enables maximum performance at the lowest possible cost. With the Siemens Simatic S7 series and the Allen Breadly PLCs such as Control Logix and Compact Logix, IFA Technology offers a long-term compatible system control that is scaled to your needs. Our experienced programmers develop structured and reproducible PLC programs that guarantee fast troubleshooting and reduce machine downtimes to a minimum. Plant modifications or extensions are also possible at any time due to the components used and the control structure. With the help of modern interfaces, all plant components can be networked, so that the plant or system can be integrated into your company network as desired.

What you can expect from APROVIS exhaust gas heat exchangers: - Efficient hot water generation in combined heat and power plants - Heating of thermal oil as an energy source - Individual solutions and compact designs - All the main components for the exhaust gas section and gas treatment are combined under one roof: proprietary products developed in-house - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives

In the textile industry, our know-how in weighing, conveying, mixing and dosing liquids and solids finds further areas of application. Areas of application include the provision of impregnates or other refinements of fibres or surfaces. IFA Technology considers your individual requirements and builds customised plants and systems for the textile industry. We supply all types of plants and systems - from standard systems to customer-specific special plants. Our innovative plants and systems for the textile industry support new developments and treatment options for fibres. Application of plants for the textile industry: Storage, mixing and dosing of liquids, for instance impregnations and additives

METAL DETECTOR FOR THE EXAMINATION OF TIMBER IN YOUR LOG PROCESSING PLANT. Detects all metals encapsulated or as loose parts. High sensitivity even in rough sawmill environments. Minimal space requirement (reduced metal free zone) due to mesuCAGE technology. A worthwhile investment that protects your machinery. Increase your profit by minimizing downtime

STRATE valve shafts are used in industrial and municipal areas. The different design sizes of the STRATE AWALIFT valve shafts allow the optimum size to be assigned to every individual purpose. Pipe and cable ducts, which are located exactly according to customer specifications in the manufacturing plant, meet all requirements for an exact fit, safety and ease of maintenance. Optimum, safe installation locations for valves and system components whose size allows them to be housed in a shaft Are excellently suitable as inspection shafts with flushing connection, as feeding points for AWAaerob ventilation systems, for ventilation and bleeding valves, for pig traps etc. Are made of high-quality, durable and waterproof materials with a high material strength and low material weight, with the design permitting short installation times and excluding complex

Whether it’s for maintaining stable temperatures in storage tanks, compensating of heat loss in supply pipes, liquefying firm substances such as wax or vaporizing water or thermal oils, electrical heaters by Klöpper Therm are the answer. Our heaters provide optimised, energy efficient and reliable process control for all kinds of plants – chemical, petrochemical and pharmaceutical – as well as power plants and refineries. Based on the client’s specifications, we verify the technical feasibility for each application and transforms it into a concrete design.

ELKON, with its tailor made precast concrete plants commissioned all over the world, offers high quality solutions for precast industry wherever concrete is needed. ELKON precast concrete batching plants are used for production of precast concrete products such as concrete pipes, concrete paving blocks, hollowcore, etc. They can be equipped with one mixer or more in various capacities and can be specially designed according to factory layout, product type and concrete transfer method. ELKON precast concrete batching plants general features Custom-tailored solution to accommodate exact needs of project Custom-made design according to factory layout Completely customizable concrete transfer system High weighing accuracy Optimized concrete production and concrete transfer for the project with special automation system Continuous and high quality concrete production

"Cassava Origin and History Cassava or manioc is the edible tuber of Manihot esculenta, a woody perennial shrub. Cassava is commonly eaten in Africa and South America. The plant originated in Brazil. All currently cultivated plants are cultivars. Cassava can grow on very poor soils and can also withstand dry periods. In addition, the plant is resistant to grasshopper plagues. From archaeological findings of tools used for scraping the tubers, it appears that cassava was cultivated in Brazil and Venezuela as early as 3000 BC. Production process Cassava Flour Cassava flour is a fine-grained dehydrated powder rich in fiber and starch obtained by crushing cassava roots, which are pressed and dried. Use Cassava Flour Cassava flour is very useful for making gluten-free recipes. In addition, cassava flour is useful for baking for a bread-like result. It can be used for both sweet and savory dishes such as biscuits, pizza crusts or pancakes."

Aloe Vera, lat. aloe barbadensis miller, belongs to the lily family. It is one of the oldest known medicinal plants and grows in the arid and semi-arid regions of Africa, Central and South America. The gel like inside of the leaf, which can store water and nutrients for long periods of drought, was already used by advanced civilisations to maintain beauty and well-being. Of the more than 300 types of aloe, „Aloe barbadensis miller“ has the best properties for our skin and human organism. Effects: Taken as a juice, aloe vera activates our entire organism. The main active ingredient is a long-chain type of sugar, mucopolysaccharid acemannan. In addition to the active ingredient acemannan, there are other valuable ingredients in the aloe vera plant. Above all, there are numerous minerals, enzymes, amino acids and vitamins. Used for centuries in natural medicine in India and Central America, Aloe vera is known as the "first aid plant" for its extensive healing properties.

Existing factory workshops and industrial plants can be surveyed three-dimensionally in detail. For new buildings, further extensions and reconstruction in the future, there are spatial coordinates available which are accurate to a millimeter, from which two-dimensional construction plans can easily be drawn. Generation of 3D models From the data gathered by Z+F laser scanner systems and with the LFM software, 3D models of the actual state of the factory or plant (e.g. tubes, steel girders) can be generated. Furthermore, it is possible to generate complete CAD models from the 3D scan data (the so-called point cloud). Clash detection It is possible to simulate manufacturing processes and to carry out collision checks with 3D models. Example: Another production robot of the same type has to be added to an existing plant. Facility management All fixed equipment like cables or tubes is surveyed as well and saved in a 3D database which serves as the basis for future reconstruction.

The electronic pressure switch DS 350 is interesting for all users in plant and machine engineering, due to the integrated IO-Link interface to exchange process data, diagnostic reports and status messages with a superordinate control level, as standard. In addition, further information can be retrieved that allow conclusions to the application process. Especially in mechanical engineering, great demand for flexible operating conditions have to be satisfied. Features — Nominal pressure from 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.5% / 0.35 % (opt. 0.25 %) FSO — IO-Link according to specification V 1.1 — smart sensor profile — data transfer 38.4 kBaud — indication of measured values on a 4-digit LED display — rotatable and configurable display module — parameter settings via IO-Link or menu (VDMA-conform) — additional information via IO-Link accessible Optional features — different mechanical connections

The Platform Truck SFB is a freely manoeuvrable, self-propelled electric vehicle for the in-plant transport of all sorts of heavy loads such as: metal sheets, steel girders, coils, machine parts, cast iron and tools. Due to its modular design, this self-propelled vehicle can be customized to suit various customer-specific requirements. load capacities up to 63t can be used as an all-purpose vehicle indoor and outdoor application cable remote control battery powered electric drive (80V) maintenance-free AC drive technology robust design single-axle, all-wheel and multidirectional steering Options: proportional steering radio remote control cabin or driver's station solid rubber tires for driving over asphalt lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification automatization to a driverless transport system, with partners hydraulic lifting device further options available upon request

The combination of multiple technologies/procedures in one step is called OneShot technology. Semi-finished products (e.g. renewable raw materials such as natural fibers) and decorative materials (e.g. textiles) have to be handled in one production step to finish a component, such as a door panel. FRIMO has developed a modular system that allows for simple and customized configuration of a OneShot plant with all necessary tools. The following units can be integrated into such a plant: feeding station, heating station, calibrating station, material assembly station, press with OneShot tool, part-removal station.

Four-channel USB optometer designed for mobile use. Features: Compact device for use with all photometric, radiometric, colorimetric, plant-physiologic and photo-biologic measurement heads from Gigahertz-Optik. USB interface. Battery operation or power supply USB.

Hybrid-Braid in W-Profile made of ePTFE/Graphite and Graphite yarn with Run-In Lubricant Characteristics Universal packing for sealing abrasive mediums in all manner of plant rotating equipment Low Coefficient of friction and ultimate heat conductivity High plant standardization possibilities Recommended Shaft Surface Hardness HRC35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 25 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 14 Density: 1.55 g/cm³ Main application Centrifugal pumps Mixers Kneaders Agitators Refiners Autoclave Filters Suitable for Bauxit Industry General Mining Ash Slurrries in Power plants Pulp and paper industry Chemical industry Waste water technology Universal use Form of delivery This packing can be manufactured from 6 to 40 mm square as well as in intermediate, inch sizes and special measurements. 06 - 09 mm on 1 kg spool 10 - 15 mm on 2,5 kg spool 16 - 25 mm on 5...

MIXACO Container Mixer i4MIXACO has been an innovation leader in the mixing industry for years. With the innovative container mixer i4 we are going one step further into the future. Outstanding mixing flexibility, high quality and reduced cleaning effort to a minimum are its outstanding features. Equipped with the new MIXACO Control Center (MCC) we set a new milestone for highly efficient mixing plants. All advantages at a glance * Flat mixing head * Optimized suction * Dust protected machine components * injection through mixer shaft * different container sizes on one mixer * Reduction of cleaning times * Lifting device with container positioning * High flexibility * New tools for more efficient mixing * Lower energy consumption * No base plate

The EcoResinator is particularly suited to full the specic demands that are made on the technology employed for the glue-blending system used to manufacture MDF. Siempelkamp has equipped the EcoResinator with Schlick two-component nozzles. The second component that is used with the glue is steam. The size of the glue droplets is set with the help of the steam pressure and quantity. The corresponding parameters required for achieving the best possible application of glue based on the breboard's density are stored in the program. The optimised gluing methods may either be used to improve strength with the same amounts of wood and glue o and bres while preserving the same strength. The EcoResinator can potentially save up to 15% of glue over classic b recommended for all MDF plants. The EcoResinator also oers benets when existing plants are modied at a later point in time. The glue-blending sy within 24 hours.

Control cabinets form the technical "central nervous system" of every production plant. They supply machine and plant components with electrical energy, protect electrical circuits, control drives and network machines with the Internet. In addition, they act as an interface for all information on the current plant and processing status and link production exactly where processes need to be accelerated and efficiency increased. Our subsidiary ATR Industrie Elektronik GmbH is your competent partner for the construction of switchgear and switch cabinets. We supply a wide range of different versions based on all current national and international standards. Switchgear is used in almost all industries, in addition to the wood-based panel and metal industry, e.g. in the automotive sector, in turbine and compressor technology, in energy supply or also in cooling and air-conditioning technology.

Cryogenic Mill The solution for fine grinding temperature-sensitive products. Our cryogenic grinding plants enable fine grinding of lubricating and temperature-sensitive products. This not only results in a technically perfect grinding but in addition thermal damage of the ground material and resulting grinding losses are prevented by the cryogenic grinding. All plants are designed with swivel screw coolers and liquid nitrogen cooling, appropriate dosing devices, separators as well as bunkers as closed plants. Technical data Target fineness: 10-2,000 µm Plant types: Pin mills, cross beater mills Product-contacting parts: Stainless steel Cooling: By liquid nitrogen Delivery in: Bagged goods, Big Bags, oktabins, drums Feeding: Via feeding stations, metering screws and vertebral screw coolers Filling into: Bags, drums, Big Bags, cardboard boxes and special containers Areas of application Fine grinding of resins Fine grinding of foodstuffs Fine grinding of seeds Fine grindi

Fine Mill The solution for fine grinding Ebbecke Verfahrenstechnik AG is your specialist for demanding tasks in the area of ??contract grinding. The fine grinding plants used enable the dissolution of agglomerates as well as the breaking up of solid grain structures including even the very finest grinding. All our grinding plants for bulk material processing are made of stainless steel and designed with dosing devices, discharge with one-way filters, separators and bunkers as closed plants. Accordingly, they comply with all the strict specifications and hygiene standards of the of food, pharmaceuticals and cosmetics industries. Technical data Target fineness: 1.0-5,000 µm Plant types: Classifier mills, air jet grinding plants, spiral jet grinding plants, pin mills, cross beater mills, hammer mills, Fitzmill, screen mills, disc mills, graters, crushers, cryogenic grinding, nitrogen overlaid plants Product-contacting parts: Stainless steel Delivery in: Bags, bales, Big Bags, octa

Dry micronization The optimal solution for fine grinding of bulk material We offer you a wide range of different types of plants for contract grinding in our fine grinding centers. Among them are special grinding plants, such as a special mill for natural products, an efficient circulating gas plant and a cryogenic grinding system for temperature-sensitive products. All our grinding plants for bulk material processing are made of stainless steel and designed with dosing devices, discharge with one-way filters, separators and bunkers as closed plants. Grain size exactly as you request it! Our fine grinding plants enable the dissolution of agglomerates as well as the breaking up of solid grain structures up to the finest grinding in a reproducible product quality. Customers of Ebbecke Verfahrenstechnik AG appreciate the flexibility of the available grinding systems that can be customized to suit the specific requirements of the grinding process. Nothing is left to chance because cutti

Service and preventive maintenance serve to maintain value, assure a proper function, and guarantee a long operating life. Important analysis parameters can be measured and evaluated during service jobs on site. Furthermore, all of our plants can be equipped with a tool for remote maintenance via FPN. This allows us to guarantee the fastest possible support in case of a failure. We can access your water treatment plan through this online conncection. We offer you the option of signing a service and maintenance contract. This contract includes regular expert service for your systems and equipment. We would be happy to submit an offer tailored to your specific needs.

The Apex µ-Guard line of Covered Drive Tools is the tool of choice for enhancing operator safety in almost all leading assembly plants. Apex® µ-Guard ™ free-spinning covered drive tools increase operator safety by significantly reducing or eliminating pinch points when operators are wearing gloves. Apex µ-Guard provides a protective barrier between genuine Apex fastener tools and your finely finished workpiece, thereby delivering the proven Apex performance plus the best protection available against in-system damage. The free-spinning design provides maximum protection for polished and highly sensitive surfaces. Apex has solutions for all aspects of safety on an assembly line when it comes to fastener drive tools. In addition to our line of Covered Bits, Bit Holders, Sockets, Extensions, and Universal Swivel Wrenches, as well as µ-Guard Gap Covers to eliminate the gap between a socket and an extension or between the right-angle power tool and a socket / extension.

Roll Compactor The roll compactor plant – the solution for low-dust products With our roller compactor plants powdered components especially low in dust can be condensed into granulate. In this case, several components with divergent properties can be mixed and granulated together. This way our roller compactor plant allows an efficient complete production of granulates from powder mixtures. The plants used at Ebbecke Verfahrenstechnik are equipped with pre-and fine granulators, while at the same time fine particles are fed back via post-screening. All granulation plants are continuously adjustable in their pressing force, in addition part of the plants are equipped with pre-compression by means of a vacuum intake. Technical data Granulation performance: 5 - 500 kg/h Product intake by means of: Pre-compressor screw (two-step) and vacuum intake (partial) Product-contacting parts: Stainless steel Feeding from: Big Bag, oktabin, bagged goods, cardboard boxes, drums Platform const

Plastic Mill The solution for the production of plastic powder Our fine grinding plants for plastic granulates enable the grinding of a wide variety of plastic granulates including even the finest grinding. All our grinding plants for bulk material processing are made of stainless steel and designed with dosing devices, discharge with one-way filters, separators and bunkers as closed plants. The ground goods can be processed on site or poured directly into the container specified by the customer. Technical data Target fineness: 200-1,000 µm Plant types: Disc mills, pin mills, granulators, cryogenic grinding plant Container: Bags, Big Bags, octabins, drums or drums Feeding from silo possible Filling from silo vehicles is possible Areas of application Fine grinding of LDPE Fine grinding of polypropylene Fine grinding of polystyrene Fine grinding of polyamide Fine grinding for simultaneous de-dusting of the finished product Fine grinding of EVA under cryogenic conditions

Being the smallest model of the new Q series, the Q 1500 achieves precise plasma cuts at the highest level for material thicknesses of up to 60 mm and with a maximum cutting current of 150 A. New components and especially the operator interface Q-Desk meet the complex requirements of a digitalised production in the age of Industry 4.0. The specially developed browser-based operator interface Q-Desk provides real-time process data and information of all plant components on any standard device and location-independent. The user benefits from extensive information enabling him to plan and execute a variety of maintenance tasks as guided by the system. This generation of plasma cutting systems is the result of intensive research and development work by Kjellberg and a landmark in the 60 years of Kjellberg's plasma history. The new digital plasma series Q sets pioneering standards regarding quality and connectivity.