Air piping - Import export

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

The »speedfit« and »sharkbite« line systems are ideally suited to transporting compressed air. Both can be installed quickly and easily by you and offer, compared to conventional methods, significant labour and energy savings. Convert your compressed air piping systems with minimal production downtime and cost. Plastic pipes, aluminium pipes, air distribution socket, pipe clamps, water separators, loosening assists, brass connectors, POM/PP connectors, protective caps and retaining rings comprise this range. Both are durable and corrosion-resistant, and no additional sealing material is required for their installation. You get optimum flow rate and the utmost air quality. You also extend the lifespan of your systems and installations.

The »speedfit« compressed air piping system is characterised by its simple and fast installation and it is ideally suited for conveying compressed air and liquids. It is installed without tools and the connections can be quickly fastened and released with additional sealing material not required. The »speedfit« compressed air piping system is fabricated according to BSX 5750 Part I, ISO 9001, EN 29001. The good flow properties and large range of products characterise this system. Plastic pipes, aluminium pipes, air distributor sockets, pipe clamps, water separators, loosening assists, brass connectors, protective caps and retaining rings are included in the »speedfit« series.

plunger Ø 20 mm, stroke 8 mm off-position extended contact with air pressure pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position extended contact with air pressure pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position extended contact with air pressure pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 20 mm, stroke 8 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

Category Compressed-air technology / Compressed-air hoses / PA, PU, PE Pipes / Polyamide pipe / PA 12, black Product number supplier 67209101

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

Coating of pipings and air ducts, firing, boiler and heating systems, tanks, exhaust systems, silencers, light-metal bodies on utility vehicles Repairs to mechanically (stone impact) or chemically (de-icing salt) damaged aluminium rims Shielding of non-metallic materials, e.g. cardboard, wood, glass or plastics etc. Advantages and benefits Excellently suited for sole, decorative corrosion protection Universal protective and decorative coating for all materials Economical due to low consumption and self-cleaning spray valve High covering capacity Fast-drying

The STRATE AWAaerob 110 - 1700 ventilation system consists of an oil-free compressor with noise suppressor, a switching system with operating hours counter and a timer, as well as a complete connection fittings set with manometer, check valve and connection line. The ventilation quantity and duration are adjusted by the timer based on the compressor run time. Fine pearls of oxygen are injected from the air. Ideal for short pressure pipes and high flow speeds in the pressure pipe Area of application for pressure pipes <= DN 200 Use with or without accompanying pipe (depending on the high and low points in the pressure pipe)

By creating specialized aluminum alloys, pioneering new treatments and combining aluminum components with other materials such as paper, plastic and fiberglass, Novelis has become the global quality leader for the transportation manufacturing industry. We have created a range of transportation manufacturing products that provide insulation against heat, sound and gases, high strength so components remain effective under pressure, and superior flexibility for a full range of designs and implementations. Key Novelis aluminum components include heat exchangers, heat protection mats and sleeves, energy absorption elements, hoses, silencers and flexible tubes, including heat protection tubes, air ducts and exhaust pipes. Novelis is a leading supplier of light-gauge, narrow-slit aluminum fin stock (bare and clad) and brazing sheet used in the production of heat exchangers.

The DR 206 discharge row offers air supported separation of materials, such as sheets in offset printing. The discharge row comprises several discharge nozzles mounted to slide on a carrier pipe. The air supply is centrally adjustable by the operator and each nozzle is also individually adjustable.

With high-quality filter tubes and PTFE diaphragms. Paint dust filters Wet painting also results in overspray. Overspray is the solid portion of the paint that is not taken up by the workpiece. According to the purpose of use, the overspray is moist and sticky immediately after release. It is captured by the exhaust air stream in the spray booth and fed to a filter. This can be, for example, a baffle plate filter, paper filter, fleece filter, glass fibre filter or also combinations of these. The adhesive effect causes the paint particles to adhere to the contact surfaces of the respective filter medium, as a result of which a good degree of separation is achieved. However, all these filters are storage filters, i.e. the filters clog up more and more during operation and cannot be regenerated. A filter exchange becomes necessary if the exhaust air rate of the spray booth falls below the minimum. This can be very time-consuming under certain circumstances and the work process must be interrupted in order to do it. To make things worse, not only must the filtered and bound paint residues be disposed of, but also the actual filter materials. Such tooling times are not justifiable for automatic, continuous or multi-layer painting processes. Continuous procedures such as automatically cleaned filters are likewise required for this. The humidity and the adhesiveness of the particles to be filtered are thereby the problem. In order to solve this problem, the paint particles should be relieved of their adhesive capability as far as possible whilst still inside the paint booth. Our patented ‘RTS-Rotation’ system is outstandingly well suited for this. The system is comprised of slowly rotating brush rollers, which take up the adhesive paint particles on the surface of the bristles and allow them to dry there. The bristles are automatically regenerated at pre-specified time intervals by combing devices that swing in at the rear of the brush rollers. The dislodged paint residues can then be removed and disposed of either manually during work breaks or automatically during operation. The degree of separation of this system is, however, insufficient to satisfy the environmental protection requirements concerning residual dust content in the exhaust air. A further filter stage is necessary for that. It must be assumed that the paint particles arriving here are to a certain extent still damp and sticky. For this we use special paint dust filters with high-quality filter tubes with PTFE diaphragms. If necessary, precoating agents (auxiliary dust) are used in order to neutralise the adhesive capability of the particles and to keep the dust layer on the filter elements permeable to air. The precoating agent is injected into the raw air pipe by means of special dosing units. The filter tubes are cleaned by means of compressed air impulse cleaning. The use of this technology requires special know-how. We have had the appropriate experience for almost ten years. The implemented plants have capacities ranging from 5,000 to 90,000 m³ /h. Because of the large number of different paint systems, individual experiments are usually necessary in our pilot plant in order to find the correct solution for the individual case.

Leves complement ideally to flow measurements, since each flow is coming from a container or is pumped into a tank or container. For this the level information is extremely important because through these pumps and valves can be controlled, so that the flow can be measured with high reliability. In case of emptying tanks, the pump power can be reduced, so that the risk of air in the pipes is reduced. This in turn would affect the measurement. During tank filling can by throttling the power of the pump a overfilling be avoided so that the full capacity of a tank can be exploited. The level measurement in combination with the flow measurement complement each other ideally, if the measured information are processed together and evaluated. The plant availability is held high, because in case of failure or maintenance of a measurement, the other still works. Energy optimized, high-frequency electromagnetic impulses, generated by the electronics, are propagated along the probe (single rod..

By a highly intensive cooling, which is integrated in the crank casing a continous running at max 10 bar is ensured. In comparison with other compressed air compressors the big filter surface of the suction filter with 10 µ guarantees a long lifetime and an optimal suction behaviour. Due to the missing of external pipes the compressed air compressors of the range Marathon, are espescially compact. Advantages extreme long running life maintenance free low noise level continuous running

The device is used as hand pistol for riveting, welding and edge folding of plastic parts. The weight of the welding pistol is lower than 900 g. The optimum design of the welding pistol allow for a particularly comfortable handling. The titanium booster ensures a maximum safety of the converter and optimal adaptation to the various tools. Advantages of the SPK version: By the permanent cooling of the piezo-ceramic transducer and the titanium booster an extremely high performance period can be achieved. The cooling air pipe is integrated in the HF control cable. Advantage: No disturbing connective elements for a separate pipe, and the cooling air is led directly to the spots to be cooled.. For this the grip is fitted with an exhaust port for the cooling air, into which cooling pipes can be simply screwed in. In this version the generator is also cooled by an incorporated ventilator. As an option we can offer hand welding devices with energy control

As breather/venting safety device incorporating an explosion proof flame arrester element for installation on top of storage tanks, tank access covers or breather pipes. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe. This device is not permitted to be installed in enclosed areas. Approved for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 and an maximum operating temperature of 60 °C.

As breather/venting safety device incorporating an explosion proof flame arrester element for installation on top of storage tanks, tank access covers or breather pipes. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe. This device is not permitted to be installed in enclosed areas. Approved for all materials of the explosion group IIB3 with a maximum experi-mental safe gap (MESG) ≥ 0.65 mm and an maximum operating temperature of 60 °C .

Application as inline armature with venting and breather valve function for vessels, used preferably for installations in pipes. The exhaust air is carried away via a pipe. The ventilation is also effected via a pipe, which is preferably used to carry inert gas. Functions the same as KITO® VD/o3-… (type sheet F 18 N).

Application as breather/venting safety device incorporating an explosion proof flame arrester element for installation on top of storage tanks, tank access covers or breather pipes. The breather allows the unimpeded flow of gases out to atmosphere and air into the tank/pipe thereby preventing vacuum locks whilst ensuring provision of a permanent and reliable protection against any flashback into the tank/pipe. This device is not permitted to be installed in enclosed areas. Approved for all materials of the explosion group IIB3 with a maximum experimental safe gap (MESG) ≥ 0.65 mm and a maximum operating temperature of 60 °C .

Leak detection in the age of digitalization SONOCHEK is a digital ultrasonic testing device to detect inaudible waves and frequencies in the air or in a metal machine frame. It is primarily used to detect leaks in any industrial air and gas pressure pipes and vacuum systems. Leaks of compressed air and gas systems in particular can be very costly because more energy needs to be produced to compensate for the loss. Its detecting range reaches from 20 up to 100 kHz. These frequencies are inaudible to human ears, but SONOCHEK can detect them and make them audible and visible, while specifying the leak and evaluating the total amount of loss, all of which can be combined in a full report. An integrated camera and microphone enable the engineer to comment on his findings and refine the final report.

SCHÜTZE S 947 heavy duty convertible spraygun incl. precision air micrometer, with feed pipe, flowcup or syphoncup available nozzle dimensions: 0,8; 1,0; 1,2; 1,3; 1,4; 1,5; 1,7; 2,0; 2,5; 3,0; 3,5 mm ø nozzle and needle: stainless steel gun body: aluminium, anodized blue Also available in HVLP-technique